Re: mpd success stories, anyone?

Alex Povolotsky wrote:
And, again, please show me your mpd.conf

Attached.

--
Alexander Motin mav@xxxxxxxxx
Optima Telecom
default:
log -bund -fsm -lcp
set console ip 127.0.0.1
set console user xxx yyy
set console open
set netflow node netflow
set netflow hook 200
new -N b0 l0
load server_default
new -N b1 l1
load server_default
new -N b2 l2
load server_default
....
new -N b897 l897
load server_default
new -N b898 l898
load server_default
new -N b899 l899
load server_default

server_default:
set bundle no multilink
set bundle yes noretry
set iface enable tcpmssfix
set ipcp ranges lo0 127.0.0.2/32
set ipcp dns 195.248.191.67 195.248.191.72
set ipcp no vjcomp
set link mtu 1492
set link mru 1492
set link accmap 0x00000000
set link keep-alive 30 100
set link max-redial -1
set link deny pap
set link enable pap
set link no chap
set link no eap
set link no acfcomp
set link no protocomp
set auth disable internal
set auth enable radius-auth
set auth enable radius-acct
set radius server x.x.x.x yyy 1645 1646
set radius timeout 7
set radius retries 5
set radius me vlan110
_______________________________________________
freebsd-net@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: Mpd-4.2 released.
    ... However on my Cisco 7206VXR i can bundle physical ... link together with VirtaulTemplate interface in one vpdn-group config ... in this example I use 'load' to save lots of typing.. ... set link yes acfcomp protocomp ...
    (freebsd-net)
  • Re: Mpd-4.2 released.
    ... I wonder if new mpd still needs hundreds of config lines for 300 incoming pptp connections.? ... and does it still create a new ng interface even no pptp connections established? ... in this example I use 'load' to save lots of typing.. ... set link yes acfcomp protocomp ...
    (freebsd-net)
  • Re: Mpd-4.2 released.
    ... However on my Cisco 7206VXR i can bundle physical ... link together with VirtaulTemplate interface in one vpdn-group config ... in this example I use 'load' to save lots of typing.. ... set link yes acfcomp protocomp ...
    (freebsd-net)