attempting VPN again
- From: "Jim Stapleton" <stapleton.41@xxxxxxxxx>
- Date: Fri, 20 Apr 2007 08:24:17 -0400
OK, I found a Windows based VPN server at work (we have one windows + 2 cisco)
I figured I'd try that because it was the least painful to setup
elsewhere (meaning fewer things that vary in configuration?), and I
found *some* references to connecting to it.
http://lists.freebsd.org/pipermail/freebsd-net/2006-June/010891.html
Here are my files. Anything in ALL CAPS is a replacement for some
information I'd rather not display publically.
/usr/local/etc/mpd/mpd.conf
========================================
vpn:
new -i nve0 vpn vpn
set iface session 28800
set bundle authname "WORK-DOMAIN\\WORK-USERNAME"
set bundle enable compression
set ccp yes mppc
set ccp yes mpp-e40
set ccp yes mpp-e56
set ccp yes mpp-e128
# set this to your correct routing information
set iface route EXTERNAL-WORK-VPN-IP/24
set link enable no-orig-auth
open
========================================
/usr/local/etc/mpd/mpd.secret
========================================
WORK-DOMAIN\\WORK-USERNAME WORK-PASSWORD
========================================
/usr/local/etc/mpd/mpd.secret
========================================
vpn:
set link type pptp
# set pptp self 1.2.3.4
set pptp peer EXTERNAL-WORK-VPN-IP
set pptp enable originate outcall
========================================
sjss@elrond 08:12:45 (1) /usr/local/etc/mpd > sudo mpd
========================================
Multi-link PPP for FreeBSD, by Archie L. Cobbs.
Based on iij-ppp, by Toshiharu OHNO.
mpd: pid 91637, version 3.18 (root@xxxxxxxxxxxxxxxxxxxx 22:07 19-Apr-2007)
[vpn] interface "nve0" is not a netgraph interface
[vpn] netgraph initialization failed
mpd: no bundles defined
mpd: no bundles defined
mpd: no bundles defined
mpd: no bundles defined
mpd: no bundles defined
mpd: no bundles defined
mpd: no bundles defined
mpd: no bundles defined
mpd: no bundles defined
mpd: no bundles defined
[:]
========================================
Here's a point of confusion for me (I tested all using ipconfig):
(1) My machine at work is a windows machine, ip config reports a
netmask of 255.255.254.0
(2) The machine I admin is also windows, with 255.255.255.0 as it's netmask
(3) My windows desktop, when VPNing in has a netmask of
255.255.255.255 for the VPN interface.
Any suggestions on how to get this up? This is one of only two tasks I
need to boot into windows (at home) to accomplish currently, and I'd
like to rectify that.
It looks like I need to make a netgraph bridge, but I don't know where
to start looking for that one. Netgraph(4) wasn't enlightening for me.
The ipsec section of the handbook left me more confused then I was
when I started.
Thanks,
-Jim Stapleton
_______________________________________________
freebsd-net@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@xxxxxxxxxxx"
- Follow-Ups:
- Re: attempting VPN again
- From: Nicolas Gieczewski
- Re: attempting VPN again
- From: Jim Stapleton
- Re: attempting VPN again
- Prev by Date: Re: net/mpd4: Unable to pass pass traffic as pptp client
- Next by Date: Re: attempting VPN again
- Previous by thread: Device polling in the 5.x series
- Next by thread: Re: attempting VPN again
- Index(es):
Relevant Pages
|
