Re: mpd and vlan

From: Ganbold <ganbold@xxxxxxxxxxxxx>
Date: Wed, 25 Jul 2007 19:18:40 +0800

Nikos Vassiliadis wrote:

On Wednesday 25 July 2007 13:09, Ganbold wrote:

I tried it in mpd-3.18, Radius server sends Framed IP Address, however
mpd still assigns IP specified in "set ipcp ranges 192.168.5.2/32
192.168.5.169/25"
What could be a problem? How to solve this issue?

If you enable "radius-ip" option, mpd will use
Framed-IP-Address offered by your RADIUS.

From here:
http://www.bretterklieber.com/mpd/doc3/mpd22.html

Off topic, why not mpd4?

Nikos

It works. One question, does this syntax also apply for mpd-4.2.x?

thanks,

Ganbold

--
LSD melts in your mind, not in your hand.
_______________________________________________
freebsd-net@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@xxxxxxxxxxx"

Follow-Ups:
- Re: mpd and vlan
  - From: Nikos Vassiliadis

References:
- Re: mpd and vlan
  - From: Ganbold
- Re: mpd and vlan
  - From: Nikos Vassiliadis

Prev by Date: Re: mpd and vlan
Next by Date: Can't get MPD to work..doesn't listen on interface
Previous by thread: Re: mpd and vlan
Next by thread: Re: mpd and vlan
Index(es):
- Date
- Thread

Relevant Pages

Re: mpd and vlan
... Nikos Vassiliadis wrote: ... mpd still assigns IP specified in "set
ipcp ranges 192.168.5.2/32 ... Yogi Berra: "Closed." ... (freebsd-net)
Re: mpd and vlan
... On Wednesday 25 July 2007 14:18, Ganbold wrote: ... mpd will use ...
specifying required IP address. ... will propose it to client instead of specified in "set
ipcp ranges" ... (freebsd-net)
Re: PPPOE concentrator troubleshooting
... And the reason I did that was because mpd was supposed to be a lot faster and require
less resources because it runs partially in userland and partially in kernal mode. ... I also
ran into a Linux "how to" that said two NIC cards were required, one with no IP address and one
with an IP address. ... does anyone know what "set ipcp ranges" actually does. ...
It's hard to pms too much when it's free, but darn I would pay money for some *good* documentaion or
for someone to send me all of their config files from a ... (freebsd-isp)
Re: PPPOE concentrator troubleshooting
... i'm attaching a file in which you have a generator for mpd.conf for pppoe connections.
... I've actually seen that before, and it would be great, except that I used mpd and not
pppoed. ... I also ran into a Linux "how to" that said two NIC cards were required, one
with no IP address and one with an IP address. ... does anyone know what "set ipcp ranges"
actually does. ... (freebsd-isp)
Re: mpd and vlan
... On Wednesday 25 July 2007 13:09, Ganbold wrote: ... mpd still assigns IP specified
in "set ipcp ranges 192.168.5.2/32 ... mpd will use ... Off topic, why not
mpd4? ... (freebsd-net)