Re: bridging ath
- From: Sam Leffler <sam@xxxxxxxxx>
- Date: Thu, 27 Sep 2007 18:22:19 -0700
Sam Leffler wrote:
Randy Bush wrote:Sorry, engage brain before opening mouth.Be sure apbridge is enabled
not running in hostap mode, not an access point
You can only bridge a wireless card in hostap mode.
I don't know what you're trying to do but you're looking in the wrong place and I suspect you're confused about some stuff. When you attach your wired nic to a bridge and and turn the bridge on the nic gets set in promiscuous mode. This is likely why you can ping the other wireless station through the wired nic. To ping the wireless station through your AP then AP must either fwd the packet directly or bridge it using some mechanism. You cannot bridge a wireless interface unless it's operating as an ap. Either way it's an issue at the AP.
You can diagnose all this with tcpdump.
Sam
_______________________________________________
freebsd-net@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@xxxxxxxxxxx"
- Follow-Ups:
- Re: bridging ath
- From: Randy Bush
- Re: bridging ath
- References:
- bridging ath
- From: Randy Bush
- Re: bridging ath
- From: Andrew Thompson
- Re: bridging ath
- From: Randy Bush
- Re: bridging ath
- From: Sam Leffler
- Re: bridging ath
- From: Randy Bush
- Re: bridging ath
- From: Sam Leffler
- bridging ath
- Prev by Date: Re: bridging ath
- Next by Date: Re: ng_nat+ng_netflow+mpd4 - ?
- Previous by thread: Re: bridging ath
- Next by thread: Re: bridging ath
- Index(es):
Relevant Pages
|
|