Routing with OpenVPN



Hi, I am using a tunnelservice from a Swedish tunnel provider.
I get 5 ip-adresses for it and the tunnelprovider uses OpenVPN.
The 5 ip-adresses is static and I have access of configuring PTR for the ips.
I now have a problem, I don't know how to route the traffic so that I can
configure my servers on my lan to use these ips.

[ISP]------- [Tunnel]--------[Local Network]
fxp0 tap0 fxp1
| | |
192.168.0.2 88.80.13.152 88.80.13.199
88.80.13.200
88.80.13.201
88.80.13.202

Current configuration to get tunnel to work:
route flush
route add default 88.80.13.***
route add -host 88.80.**.** 192.168.0.1
route add -host 88.80.13.152 192.168.0.1


Can anyone point me to some documentation on how to do this?
Have you done something similar and how was your setup?
What should I think about and what are the pro's and con's of the different
solutions?

Regards
n30
_______________________________________________
freebsd-net@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@xxxxxxxxxxx"



Relevant Pages

  • Re: Beeching II: "The Development of the Major Railway Trunk Routes"
    ... a 7-days a week basis would make the Woodhead route the obvious candidate. ... I suggest you take a look at a planning application submitted by National Grid - they want to renew the grid structureeither side of the tunnel and again make use of tunnel for cable ... These policies regarding reinstatement of the tunnels as a rail route would be affected by the ...
    (uk.railway)
  • Re: Central Railway update
    ... Given that their proposal is to build a new, large loading gauge route, of course they will have to build new infrastructure. ... I fail to see how building a viaduct or recomissioning a tunnel is a fatal barrier to creating a new railway line, just look at the number of viaducts and tunnels on the CTRL. ... offering more freight paths. ... With the WCML we tried to had a bit here and a bit there to an existing line to bring up speeds and capacity. ...
    (uk.railway)
  • Re: PPTP client, masquerade and routing
    ... # name of primary network interface (before tunnel) ... # provided by pppd: string to identify connection aka ipparam option ... route add -host $dev $ ...
    (comp.os.linux.networking)
  • Re: Driving from KY to NYC
    ... and is a direct route to the Lincoln Tunnel via NJ 495. ... recommend a toll free way to get to the Lincoln from the Holland. ...
    (misc.transport.road)
  • Re: Central Railway: Dead but wont lie down
    ... It's an upgrade of the existing route from the Tunnel to Redhill. ... Originally Central Railway proposed a freight only route, ...
    (uk.railway)