i configure with sysinstall my second nic , but when i restart my box i have this message
arp: 10.200.1.1 is on re0 but got reply from 00:50:7f:b0:a0:f8 on re1
my question is how to configure 2 nics with different ip on same box in the same subnet.
Configure the second with a /32 prefix (netmask 255.255.255.255) instead
of the usual netmask.
You will always receive the arp warning unless you disable it by setting
sysctl
net.link.ether.inet.log_arp_wrong_iface and
net.link.ether.inet.log_arp_movements to 0.
These limitations *may* go away in future releases.
Re: UpdatedConfirmation of NLB ... IP Subnet.... It seems that you're intending the second NICs as the Heartbeat ... Configure Network Load Balancing (NLB) with Two Network Adapters ... Configure the NLB Cluster properties according to your parameters, ... (microsoft.public.windows.server.clustering)
Re: Problem using Remoting with 2 NICs ... I agree with you on the 2 NIC's with same subnet being a bad idea. ... Setting the http channels useIpAddress property to false on the server fixed... I have clients connecting successfully on NIC 1, ... When both NICs are enabled. ... (microsoft.public.dotnet.framework.remoting)
Re: 2 NIC SBS2003R2 LAN/WAN Firewall Router Connection Failure ... router from internal client or SBS.... Please contact your router vendor to check the settings in the router, ... may be there are some rule deny the access from some IP addresses or subnet.... |> Two Nics, a static IP address, ISA, router ... (microsoft.public.windows.server.sbs)
Re: Free brain teaser - Networking ? ... The mask defines which bits in the IP address are used to define the subnet so both make it up. ... Make the mask 255.255.255.192 (for all NICs on that subnet, ... computer addresses and that's 6 bits for 64 on each subnet, minus the 0 and 63 numbers leaving 62 for actual computer and router addresses. ... (alt.comp.hardware.pc-homebuilt)
Re: 2 NIC SBS2003R2 LAN/WAN Firewall Router Connection Failure ... and the LAN NIC are on the same subnet.... My WAN NIC and LAN NIC are on separate subnets; ... That's why I asked about static routes, the router table and so on. ... Two Nics, a static IP address, ISA, router ... (microsoft.public.windows.server.sbs)
