RE: Hping/Ping



Dear Dave,

Yes there are no hops, I'm just pinging the router infront of me.

The silbpi card uses the em driver - I tried the onboard em cards but had
the same problem..

I've also connected a cable to my other card, silbpi0, which does no traffic
and pinging on there is stable. That seems to indicate it's something card
specific, but hping never has a problem ?

As you tell the onboard em-card has the same problems:
You directly connect to the router?
Have you tried to connect a switch between?
What if you ping (with a switch between) another ip at the same subnet?

Kind regards,
Ingo Flascberger
_______________________________________________
freebsd-net@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@xxxxxxxxxxx"



Relevant Pages

  • SUMMARY: Apparent flow control problem between Gigaswift cards an d Cisco Catalyst 6500 switch
    ... A few people reported trouble with the gigaswift card as ... Probably an easier solution in the long run is to set up the driver to do ... Apparent flow control problem between Gigaswift cards and Cisco ... Catalyst 6500 switch ...
    (SunManagers)
  • Re: Pitfall Prevention: SD Slot
    ... note that card readers for them are easily available ... >>be useful would be in avoiding the warmstart after a bank switch ... > Back in the nineties I made several replacement libraries ...
    (comp.sys.hp48)
  • Re: Pitfall Prevention: SD Slot
    ... note that card readers for them are easily available ... I never saw the need for a warmstart after changing a card ... > be useful would be in avoiding the warmstart after a bank switch ... Back in the nineties I made several replacement libraries ...
    (comp.sys.hp48)
  • [HPADM] RE: - SUMMARY - 1000Base SX Fiber Ethernet A4926A
    ... still did not get a link light either on the 4926 or the switch. ... hpgelanconf file was OK and the switch and 4926 matched on all parameters. ... I have re-booted this HP in the past with this card installed. ... Needless to say you cannot use your regular Cat5 cables for 1Gbit lan. ...
    (HP-UX-Admin)
  • Re: Network problem
    ... > removed card. ... > switch shows cable OK. ... > computers/devices on the local network but cannot even ping the switch. ... With only an expansion ethernet card active in the ...
    (Fedora)