ndis0 no link on 6.3-RELEASE



Hello everyone.

First off, sorry for the double post, but I'm not 100% certain at where this
post belongs.

I've found via Google many problems with ndis0 and failure to find a link in
6.3-RELEASE, without resolution. So here's my setup.

I'm using a Broadcom 4318 chipset, with drivers created from ndisgen. If you
need more specific information on the drivers, I'll be more than happy to
provide information, however I believe it to be irrelevant at this moment, as
I have used more than one driver version, with the same results.

In 6.3-RC1 and below (tested in 6.2-RELEASE, and all -STABLE releases in
between), my ndis0 adapter works as exptected, using WPA and DHCP. I can't
pinpoint exaclty what changed (I've check in /usr/src/UPDATING, as it seemed
to be most relevant), with no avail to finding anything regarding either wpa
or dhclient.

Since an upgrade to 6.3-RELEASE (both, via csup and a fresh install off of
cd), I generate my ndis module, create an /etc/wpa_supplicant.conf,
leaving /etc/dhclient as default, and am prompted with:
ndis0: no link.......... giving up

Upon 'kldunload bcmwl5.ko; kldload bcmwl5.ko', my ndis0 card looses all WPA
capabilities.

What seems to me to be the interesting part is this:
If I 'csup' to 6.3-RELEASE from -RC1, and build a kernel, the problem does not
occur -- as long as I do not 'buildworld'. However, once I 'buildworld;
installworld', I am faced with the same problems as if I had installed
6.3-RELEASE from cd.

I would really like to figure out what is causing this (both for myself, and
the other affected ndis0 victims), but I'm not sure where to look --
dhclient, wpa_supplicant or ndis itself. Any other information I could
provide, please let me know.

Thanks.

--
Glen Barber
(570)328-0318
http://www.dev-urandom.com/
_______________________________________________
freebsd-net@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@xxxxxxxxxxx"



Relevant Pages

  • ndis0 no link on 6.3-RELEASE
    ... post belongs. ... I'm using a Broadcom 4318 chipset, with drivers created from ndisgen. ... between), my ndis0 adapter works as exptected, using WPA and DHCP. ... Since an upgrade to 6.3-RELEASE (both, via csup and a fresh install off of ...
    (freebsd-questions)
  • Re: how to get ndis support working in freebsd
    ... I searched for ndis on my system but it seems like ... > install ndis or can i just get source for ndis and install it? ... Now you will need to login to the CVS server. ... ndis0 if you issue ...
    (freebsd-questions)
  • Re: project evil: signal quality
    ... > Ahh strange.. ... > Are newer drivers available? ... Given that your ndis0 -l option for wicontrol works here, ...
    (freebsd-current)
  • starting network interface on boot
    ... I installed wireless card with "project evil", and added the drivers to ... netmask 0xffffff00" to rc.conf,but ndis0 is not assigned above ... before that,there is no ndis0 interface. ... so how to "postpone" or automatize ifconfig settings of ndis0 interface? ...
    (comp.unix.bsd.freebsd.misc)
  • Wireless setup in non atheros wireless cards (project evil)
    ... So I created a wrapper for my wireless card drivers from ... windows using ndisgen following instructions at ... ndis0: NDIS API version: 5.0 ...
    (freebsd-questions)