Re: kern/131153: [iwi] iwi doesn't see a wireless network



The following reply was made to PR kern/131153; it has been noted by GNATS.

From: Adam K Kirchhoff <adamk@xxxxxxxxxxxx>
To: bug-followup@xxxxxxxxxxx, adamk@xxxxxxxxxxxx
Cc:
Subject: Re: kern/131153: [iwi] iwi doesn't see a wireless network
Date: Tue, 26 May 2009 07:58:33 -0400

Since I finally had the chance to try -CURRENT, without my development
work on this laptop, I decided to give it a shot this past weekend. I
am now running:

FreeBSD scroll.ashke.com 8.0-CURRENT FreeBSD 8.0-CURRENT #1: Sat May 23
23:11:53 EDT 2009 root@xxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
i386

Unfortunately, this has made no difference. I have tried with both iwi
and ath. They were both cloned to wlan0 (at different times,
obviously). wpa_supplicant still does not see this network. I ran
'wpa_supplicant -Dbsd -iwlan0 -c/etc/wpa_supplicant.conf -dd' each for
each driver.

With iwi:

ioctl[SIOCS80211, op 26, arg 0x0]: Operation not supported
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'bsd' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Line: 2 - start of a new network block
scan_ssid=0 (0x0)
ssid - hexdump_ascii(len=15):
4d 63 6b 65 6c 6c 61 32 38 30 46 72 6f 6e 74 Mckella280Front
key_mgmt: 0x2
pairwise: 0x8
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Line 8: removed CCMP from group cipher list since it was not allowed for pairwise cipher
Line: 10 - start of a new network block
ssid - hexdump_ascii(len=5):
61 73 68 6b 65 ashke
key_mgmt: 0x4
wep_key0 - hexdump(len=13): [REMOVED]
wep_tx_keyidx=0 (0x0)
Line: 19 - start of a new network block
key_mgmt: 0x4
Priority group 0
id=0 ssid='Mckella280Front'
id=1 ssid='ashke'
id=2 ssid=''
Initializing interface (2) 'wlan0'
Own MAC address: 00:13:ce:a8:10:ea
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface wlan0
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Cached scan results are empty - not posting
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
EAPOL: disable timer tick
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_bsd_set_wpa: enabled=0
wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
Failed to disable WPA in the driver.
wpa_driver_bsd_set_drop_unencrypted: enabled=0
wpa_driver_bsd_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=0
ELOOP: remaining socket: sock=4 eloop_data=0x34006140 user_data=0x3400e040 handler=0x8069f50

And with ath:

ioctl[SIOCS80211, op 26, arg 0x0]: Operation not supported
Initializing interface 'wlan0' conf '/etc/wpa_supplicant.conf' driver 'bsd' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
Line: 2 - start of a new network block
scan_ssid=0 (0x0)
ssid - hexdump_ascii(len=15):
4d 63 6b 65 6c 6c 61 32 38 30 46 72 6f 6e 74 Mckella280Front
key_mgmt: 0x2
pairwise: 0x8
PSK (ASCII passphrase) - hexdump_ascii(len=10): [REMOVED]
PSK (from passphrase) - hexdump(len=32): [REMOVED]
Line 8: removed CCMP from group cipher list since it was not allowed for pairwise cipher
Line: 10 - start of a new network block
ssid - hexdump_ascii(len=5):
61 73 68 6b 65 ashke
key_mgmt: 0x4
wep_key0 - hexdump(len=13): [REMOVED]
wep_tx_keyidx=0 (0x0)
Line: 19 - start of a new network block
key_mgmt: 0x4
Priority group 0
id=0 ssid='Mckella280Front'
id=1 ssid='ashke'
id=2 ssid=''
Initializing interface (2) 'wlan0'
Own MAC address: 00:12:17:63:2d:a9
wpa_driver_bsd_set_wpa: enabled=1
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=1
wpa_driver_bsd_del_key: keyidx=0
wpa_driver_bsd_del_key: keyidx=1
wpa_driver_bsd_del_key: keyidx=2
wpa_driver_bsd_del_key: keyidx=3
wpa_driver_bsd_set_countermeasures: enabled=0
wpa_driver_bsd_set_drop_unencrypted: enabled=1
RSN: flushing PMKID list in the driver
Setting scan request: 0 sec 100000 usec
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
Added interface wlan0
State: DISCONNECTED -> SCANNING
Starting AP scan (broadcast SSID)
Trying to get current scan results first without requesting a new scan to speed up initial association
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
Cached scan results are empty - not posting
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 0 sec 0 usec
Starting AP scan (broadcast SSID)
EAPOL: disable timer tick
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
Starting AP scan (broadcast SSID)
Received 0 bytes of scan results (0 BSSes)
Scan results: 0
CTRL-EVENT-SCAN-RESULTS
Selecting BSS from priority group 0
Try to find WPA-enabled AP
Try to find non-WPA AP
No suitable AP found.
Setting scan request: 5 sec 0 usec
CTRL-EVENT-TERMINATING - signal 2 received
Removing interface wlan0
State: SCANNING -> DISCONNECTED
No keys have been configured - skip key clearing
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
wpa_driver_bsd_set_wpa: enabled=0
wpa_driver_bsd_set_wpa_internal: wpa=0 privacy=0
Failed to disable WPA in the driver.
wpa_driver_bsd_set_drop_unencrypted: enabled=0
wpa_driver_bsd_set_countermeasures: enabled=0
No keys have been configured - skip key clearing
Cancelling scan request
Cancelling authentication timeout
wpa_driver_bsd_set_wpa_internal: wpa=3 privacy=0
ELOOP: remaining socket: sock=4 eloop_data=0x34006140 user_data=0x3400e040 handler=0x8069f50

Is there anything else I can test?


_______________________________________________
freebsd-net@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-net
To unsubscribe, send any mail to "freebsd-net-unsubscribe@xxxxxxxxxxx"



Relevant Pages

  • Re: [ath5k-devel] ath5k on the Acer Aspire One
    ... Initializing interface 'wlan0' ... EAPOL: SUPP_PAE entering state DISCONNECTED ... Selecting BSS from priority group 0 ... Setting scan request: 0 sec 0 usec ...
    (Linux-Kernel)
  • Re: ath5k on the Acer Aspire One
    ... The encryption fixes I know about for WPA should already be in 2.6.26. ... EAPOL: SUPP_PAE entering state DISCONNECTED ... Selecting BSS from priority group 0 ... Setting scan request: 0 sec 0 usec ...
    (Linux-Kernel)
  • Re: [Wireless, ath5k] 2.6.24-git13 9135f1901ee6449dfe338adf6e40e9c2025b8150
    ... Received 0 bytes of scan results (0 BSSes) ... Selecting BSS from priority group 0 ... Setting scan request: 0 sec 0 usec ... Starting AP scan (broadcast SSID) ...
    (Linux-Kernel)
  • [SLE] network manager wont connect - 10.1
    ... Network manager has been excellent at connecting to ... NetworkManager - we are trying to connect to linksys-t on interface ath0 ... wpa_supplicant: Setting scan request: 0 sec 0 usec ... wpa_supplicant: WPA: clearing AP WPA IE ...
    (SuSE)
  • Re: HTTP 400 - Bad Request
    ... Windows Server 2003 comes with Network Monitor, ... none of those settings have ANYTHING to do with a 400 Bad Request. ... and IIS never bothered to execute it. ...
    (microsoft.public.inetserver.iis)