Re: Success story!

From: Bill Campbell (freebsd_at_celestial.com)
Date: 06/30/03

  • Next message: clayton rollins: "Re: FreeBSD "Live" CD / Couple of other questions to get started"
    Date: Mon, 30 Jun 2003 10:47:21 -0700
    To: freebsd-newbies@freebsd.org
    
    

    On Mon, Jun 30, 2003 at 11:54:15AM -0500, Lute Mullenix wrote:
    >On Mon, 30 Jun 2003 12:34:16 +0200
    >Jalle <defacto@home.se> insisted:
    >
    > This time, installing (or
    >> connecting rather) the camera on FreeBSD was as simple (?!?) as recompiling
    >> the kernel with an extra device, plugging in, mounting it and copying the
    >> pics from the camera! No sweat!
    >>

    >Well Jalle I am one of the fortunate few to have never run Windows on my
    >home computers. Started out with OS-9 on a Tandy CoCo II, and other than a
    >few things I have had to do at work on a Windows machine have never used
    >anything but UNIX like OSs....

    My first Micro was a Radio Shack Model II (I did main frames for 12 years
    prior to that), moving to a Model 16 in 1982 running Xenix. The only
    Windows box here is my wife's, and it doesn't cause me much grief since she
    hates to listen to me piss and moan every time I have to touch it.

    >working and printing setup and running have never tried to get anything
    >going on here. I have a scanner in a box that I have never taken out, but
    >that's mainly because it was given to me and I have never had a reason to
    >use it. I have been thinking about picking up a digital camera though and
    >find your posting most encouraging. So when I get a few more pennies saved
    >up and buy my new Olympus C 720 hopefully I will be posting a similar
    >success story for the list.

    I've always used the flash readers for my Olympus 2020zoom. I have a
    PCMCIA adapter for the laptop, and USB readers which work with our Apple
    OS X systems, Linux, and FreeBSD.

    Bill

    --
    INTERNET:   bill@Celestial.COM  Bill Campbell; Celestial Software LLC
    UUCP:               camco!bill  PO Box 820; 6641 E. Mercer Way
    FAX:            (206) 232-9186  Mercer Island, WA 98040-0820; (206) 236-1676
    URL: http://www.celestial.com/
    ``During times of universal deceit, telling the truth becomes
    a revolutionary act.''  --George Orwell
    _______________________________________________
    freebsd-newbies@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-newbies
    To unsubscribe, send any mail to "freebsd-newbies-unsubscribe@freebsd.org"
    

  • Next message: clayton rollins: "Re: FreeBSD "Live" CD / Couple of other questions to get started"

    Relevant Pages

    • Re: Logitech Quickcam 3000 Pro Web cam
      ... and see if you can spot the Vendor Id/Product Id for your camera. ... Then there's a utility using the spca5xx drivers in the ports tree. ... Lately I did some work to make the BSD patch work with the current ... is now working very well under FreeBSD. ...
      (comp.unix.bsd.freebsd.misc)
    • Re: Call for Testers: FreeBSD webcam driver (and more)
      ... to build an emulation layer to compile linux device drivers on FreeBSD. ... I managed to build a FreeBSD port of the linux 'gspca' driver (which ... This is an Intel 'Create and Share' Camera Model No. CS330. ...
      (freebsd-current)
    • Re: Canon A620, FreeBSD and gphoto2
      ... Some cameras can be mounted without any software on FreeBSD. ... No we are going to use gPhoto2. ... If you play (ON THE MENU OF CAMERA) with the options on YOUR CAMERA in particular options for USB connector you will see that the following options likely will be displayed ... I do not quite know what you mean about switching my camera to PTP mode. ...
      (freebsd-questions)
    • Re: porting a webcam
      ... > and I wonder how hard would it be to port it later to the 5 series. ... > bureaucratic to get it into the FreeBSD kernel? ... I wouldn't write a kernel driver for a camera and use ugeninstead. ...
      (freebsd-hackers)
    • Re: Reposting a question for Paul W.
      ... Follow-up on shop camera advice wanted thread. ... Some observations based on a little use [> 200 pictures] to date. ... The program that comes with the camera to download the pictures ... magic code number to unlock several features in the Olympus ...
      (alt.machines.cnc)