pcmcia modem

a.shterenlikht_at_umist.ac.uk
Date: 06/03/04

  • Next message: Paul Brownsea: "Which counter?" 
    To: freebsd-newbies@freebsd.org
Date: Thu, 3 Jun 2004 10:51:34 +0000

    Hi

    I recently installed FreeBSD 5.2.1 on Compaq Armada 1700. I have a
    pcmcia modem (Psion gold card WAN Global PC Card 56 k+ Fax Combine iT).

    1. Is this not a winmodem?
    2. How do I make it work? I'm not sure if it is detected or not. I get
    the lines

    sio4: <Psion Gold Card 56K Combine iT> at port 0x2f8-0x2ff irq 11
    function 0 config 5 on pccard0
    sio4: type 16550A
    sio4: unable to activate interrupt in fast mode - using normal mode

    from the dmesg. Does it mean the card is properly detected.

    3. If it is detected, do I need to start a daemon for it?

    thanks
    anton

    full dmesg output:
    -------------------

    Copyright (c) 1992-2004 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55 GMT 2004
        root@wv1u.btc.adaptec.com:/usr/obj/usr/src/sys/GENERIC
    Preloaded elf kernel "/boot/kernel/kernel" at 0xc09e3000.
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Pentium II/Pentium II Xeon/Celeron (233.34-MHz 686-class CPU)
      Origin = "GenuineIntel" Id = 0x652 Stepping = 2
      
    Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
    real memory = 167739392 (159 MB)
    avail memory = 153321472 (146 MB)
    Pentium Pro MTRR support enabled
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    pcibios: BIOS version 2.10
    pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on
    motherboard
    pci0: <PCI bus> on pcib0
    isab0: <PCI-ISA bridge> at device 7.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <Intel PIIX4 UDMA33 controller> port 0x1020-0x102f at device
    7.1 on pci0
    ata0: at 0x1f0 irq 14 on atapci0
    ata0: [MPSAFE]
    ata1: at 0x170 irq 15 on atapci0
    ata1: [MPSAFE]
    uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1000-0x101f irq
    11 at device 7.2 on pci0
    usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
    usb0: USB revision 1.0
    uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    piix0: <PIIX Timecounter> port 0xd00-0xd0f at device 7.3 on pci0
    Timecounter "PIIX" frequency 3579545 Hz quality 0
    pci0: <display, VGA> at device 8.0 (no driver attached)
    cbb0: <TI1220 PCI-CardBus Bridge> mem 0x7fffe000-0x7fffefff irq 11 at
    device 17.0 on pci0
    cardbus0: <CardBus bus> on cbb0
    pccard0: <16-bit PCCard bus> on cbb0
    cbb0: [MPSAFE]
    cbb1: <TI1220 PCI-CardBus Bridge> mem 0x7ffff000-0x7fffffff irq 11 at
    device 17.1 on pci0
    cardbus1: <CardBus bus> on cbb1
    pccard1: <16-bit PCCard bus> on cbb1
    cbb1: [MPSAFE]
    orm0: <Option ROM> at iomem 0xc0000-0xcafff on isa0
    pmtimer0 on isa0
    atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
    atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    kbd0 at atkbd0
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: model Generic PS/2 mouse, device ID 0
    fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port
    0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
    fdc0: FIFO enabled, 8 bytes threshold
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
    ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A
    sio1: configured irq 3 not in bitmap of probed irqs 0
    sio1: port may not be enabled
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
    isa0
    unknown: <PNP0401> can't assign resources (port)
    unknown: <PNP0501> can't assign resources (port)
    unknown: <PNP0511> can't assign resources (irq)
    unknown: <PNP0700> can't assign resources (port)
    unknown: <PNP0303> can't assign resources (port)
    unknown: <PNP0f13> can't assign resources (irq)
    unknown: <PNP0c02> can't assign resources (port)
    Timecounter "TSC" frequency 233342652 Hz quality 800
    Timecounters tick every 10.000 msec
    sio4: <Psion Gold Card 56K Combine iT> at port 0x2f8-0x2ff irq 11
    function 0 config 5 on pccard0
    sio4: type 16550A
    sio4: unable to activate interrupt in fast mode - using normal mode
    rl0: <RealTek 8139 10/100BaseTX> port 0x1100-0x11ff mem
    0x88001000-0x880011ff irq 11 at device 0.0 on cardbus1
    rl0: Ethernet address: 00:02:44:7b:52:b8
    miibus0: <MII bus> on rl0
    rlphy0: <RealTek internal media interface> on miibus0
    rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    GEOM: create disk ad0 dp=0xc23f3460
    ad0: 3102MB <IBM-DKLA-23240> [6304/16/63] at ata0-master UDMA33
    acd0: CDROM <UJDA150> at ata0-slave PIO4
    Mounting root from ufs:/dev/ad0s1a 

    -- 
Dr Anton Shterenlikht
Research Associate
Manchester Materials Science Centre
University of Manchester and UMIST
Grosvenor Street
Manchester M1 7HS
UK
Tel: +44(0)161 2008959
Fax: +44(0)161 2003586
_______________________________________________
freebsd-newbies@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-newbies
To unsubscribe, send any mail to "freebsd-newbies-unsubscribe@freebsd.org"
  • Next message: Paul Brownsea: "Which counter?"

    Relevant Pages