kernel compiling prob
From: Emon (jadukor_at_gawab.com)
Date: 01/02/05
- Previous message: Dan Langille: "The FreeBSD Diary: 2004-12-12 - 2005-01-01"
- Next in thread: John Murphy: "Re: kernel compiling prob"
- Reply: John Murphy: "Re: kernel compiling prob"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: freebsd-newbies@freebsd.org Date: Sun, 02 Jan 2005 16:30:13 GMT
Hello every one
I am a newbie, I am using FreeBSD 4.10 & I was trying to rebild
a new kernel for my system(just trying).
I followed the instructions on FreeBSD Hand-Book.
*******************************
Procedure 1. Building a Kernel the ``Traditional'' Way
Run config(8) to generate the kernel source code.
# /usr/sbin/config MYKERNEL
Change into the build directory. This is printed out after
running the aforementioned command.
# cd ../compile/MYKERNEL
For FreeBSD version prior to 5.0, use instead:
# cd ../../compile/MYKERNEL
Compile the kernel.
# make depend
# make
Install the new kernel.
# make install
Procedure 2. Building a Kernel the ``New'' Way
Change to the /usr/src directory.
# cd /usr/src
Compile the kernel.
# make buildkernel KERNCONF=MYKERNEL
Install the new kernel.
# make installkernel KERNCONF=MYKERNEL
**********************************
I have tried both Procedure(2) & Procedure(1). But in
Procedure(1) it stops after
# make depend
& in Procedure(2) it stops after
# make buildkernel KERNCONF=KERNEL01
I don't know what other information I should give or how, so I
am just psating the last few lines before it stops compiling &
my KERNEL01 configuration file.
***************************************
cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs
-Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith
-Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I-
-I. -I../.. -I../../../include -I../../contrib/dev/acpica
-I../../contrib/ipfilter -D_KERNEL -include opt_global.h
-mpreferred-stack-boundary=2 setdef1.c
touch hack.c
cc -shared -nostdlib hack.c -o hack.So
rm -f hack.c
sh ../../conf/newvers.sh KERNEL01
cc -c -O -pipe -Wall -Wredundant-decls -Wnested-externs
-Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith
-Winline -Wcast-qual -fformat-extensions -ansi -nostdinc -I-
-I. -I../.. -I../../../include -I../../contrib/dev/acpica
-I../../contrib/ipfilter -D_KERNEL -include opt_global.h
-mpreferred-stack-boundary=2 vers.c
linking kernel
umass.o: In function `umass_cam_attach_sim':
umass.o(.text+0x1637): undefined reference to `cam_simq_alloc'
umass.o(.text+0x165d): undefined reference to `cam_sim_alloc'
umass.o(.text+0x1676): undefined reference to `xpt_bus_register'
umass.o(.text+0x1686): undefined reference to `cam_simq_free'
umass.o: In function `umass_cam_rescan_callback':
umass.o(.text+0x169f): undefined reference to `xpt_free_path'
umass.o: In function `umass_cam_rescan':
umass.o(.text+0x16ef): undefined reference to `xpt_periph'
umass.o(.text+0x16f8): undefined reference to `xpt_create_path'
umass.o(.text+0x170b): undefined reference to `xpt_setup_ccb'
umass.o(.text+0x1726): undefined reference to `xpt_action'
umass.o: In function `umass_cam_detach_sim':
umass.o(.text+0x17df): undefined reference to
`xpt_bus_deregister'
umass.o(.text+0x17fd): undefined reference to `cam_sim_free'
umass.o: In function `umass_cam_detach':
umass.o(.text+0x183e): undefined reference to `xpt_create_path'
umass.o(.text+0x185f): undefined reference to `xpt_async'
umass.o(.text+0x1867): undefined reference to `xpt_free_path'
umass.o: In function `umass_cam_action':
umass.o(.text+0x1beb): undefined reference to `xpt_done'
umass.o(.text+0x1bfd): undefined reference to `xpt_done'
umass.o: In function `umass_cam_cb':
umass.o(.text+0x1d19): undefined reference to `xpt_done'
umass.o: In function `umass_cam_sense_cb':
umass.o(.text+0x1e20): undefined reference to `xpt_done'
umass.o(.text+0x1e31): undefined reference to `xpt_done'
umass.o(.text+0x1e4b): more undefined references to `xpt_done'
follow
*** Error code 1
Stop in /usr/src/sys/compile/KERNEL01.
#
***************************************************
**************************************************************
#
# KERNEL01 -- kernel configuration file for FreeBSD/i386
#
machine i386
cpu I686_CPU
ident KERNEL01
maxusers 7
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
#options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, NFS required
options MSDOSFS #MSDOS Filesystem
#options CD9660 #ISO 9660 Filesystem
#options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
#options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in
debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in
debug
# output. Adds ~215k to driver.
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
device isa
#device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
#device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA
floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0
# ATA and ATAPI devices
#device ata0 at isa? port IO_WD1 irq 14
#device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device mpt # LSI-Logic MPT/Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
#options SYM_SETUP_LP_PROBE_MAP=0x40
# Allow ncr to attach legacy NCR devices when
# both sym and ncr are configured
#device adv0 at isa?
#device adw
#device bt0 at isa?
#device aha0 at isa?
#device aic0 at isa?
#device ncv # NCR 53C500
#device nsp # Workbit Ninja SCSI-3
#device stg # TMC 18C30/18C50
# SCSI peripherals
#device scbus # SCSI bus (required)
#device da # Direct Access (disks)
#device sa # Sequential Access (tape etc)
#device cd # CD
#device pass # Passthrough device (direct SCSI access)
# RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID
#device dpt # DPT Smartcache - See LINT for options!
#device iir # Intel Integrated RAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device ciss # Compaq SmartRAID 5* series
#device twa # 3ware 9000 series PATA/SATA RAID
# RAID controllers
#device aac # Adaptec FSA RAID, Dell PERC2/PERC3
#device aacp # SCSI passthrough for aac (requires CAM)
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware Escalade
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO
console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console
driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of
the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
#device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power
Management
# PCCARD (PCMCIA) support
#device card
#device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
#device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit Ethernet Card
(``Wiseman'')
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use
these NICs!
device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
#device fxp # Intel EtherExpress PRO/100B (82557, 82558)
#device pcn # AMD Am79C97x PCI 10/100 NICs
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS 7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#device bge # Broadcom BCM570x (``Tigon III'')
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
#device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
#device ex
#device ep
#device fe0 at isa? disable port 0x300
# Xircom Ethernet
#device xe
# PRISM I IEEE 802.11b wireless NIC.
#device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE
really
# exists only as a PCMCIA device, so there is no ISA attachment
needed
# and resources will always be dynamically assigned by the
pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the declaration
below will
# work for PCMCIA and PCI cards, as well as ISA cards set to ISA
PnP
# mode (the factory default). If you set the switches on your
ISA
# card for a manually chosen I/O address and IRQ, you must
specify
# those parameters here.
#device an
# The probe order of these is presently determined by
i386/isa/isa_compat.c.
#device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
#device lnc0 at isa? disable port 0x280 irq 10 drq 0
#device cs0 at isa? disable port 0x300
#device sn0 at isa? disable port 0x300 irq 10
# Pseudo devices - the number indicates how many units to
allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
device urio # Diamond Rio MP3 Player
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
# FireWire support
#device firewire # FireWire bus code
#device sbp # SCSI over FireWire (Requires scbus and da)
#device fwe # Ethernet over FireWire (non-standard!)
******************************************************
Thanks in advance
Jadukor
---------------------------------------------
Free POP3 Email from www.Gawab.com
Sign up NOW and get your account @gawab.com!!
_______________________________________________
freebsd-newbies@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-newbies
To unsubscribe, send any mail to "freebsd-newbies-unsubscribe@freebsd.org"
- Previous message: Dan Langille: "The FreeBSD Diary: 2004-12-12 - 2005-01-01"
- Next in thread: John Murphy: "Re: kernel compiling prob"
- Reply: John Murphy: "Re: kernel compiling prob"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
