Re: How to increase traffic



Bc. Radek Krejca wrote:
I have HP ProLiant DL360-G4 with one Xeon procesor. I compile new
kernel based on Generic but I have big problem with perfomance.

I got from my line only about 130 Mbit, then my cpu is working on
100%. I tried set up polling but without success because after
polling startup I got only 90 Mbit from my line.

Polling doesn't necessarily increase the throughput.
The main purpose of polling is to improve the interactive
performance under high network load.

Anyway, your machine should be able to handle much more
than 130 Mbit, so there seems to be something wrong.

What exactly runs on that machine? Any services, or is
it only a pure router or firewall? Do you have a packet
filter enabled, and if so, how many rules do you have
configured?

You said that the CPU is at 100% when you have 130 Mbit
network traffic. How do those 100% distribute across
system, interrupt and user? A few lines output from
the command "vmstat 5" might be helpful.

net.inet.tcp.sendspace=65536

I don't think that changing that value buys you anything.

Best regards
Oliver

--
Oliver Fromme, secnetix GmbH & Co. KG, Marktplatz 29, 85567 Grafing b. M.
Handelsregister: Registergericht Muenchen, HRA 74606, Geschäftsfuehrung:
secnetix Verwaltungsgesellsch. mbH, Handelsregister: Registergericht Mün-
chen, HRB 125758, Geschäftsführer: Maik Bachmann, Olaf Erb, Ralf Gebhart
Any opinions expressed in this message are personal to the author and may
not necessarily reflect the opinions of secnetix GmbH & Co KG in any way.
FreeBSD-Dienstleistungen, -Produkte und mehr: http://www.secnetix.de/bsd

"C++ is over-complicated nonsense. And Bjorn Shoestrap's book
a danger to public health. I tried reading it once, I was in
recovery for months."
-- Cliff Sarginson
_______________________________________________
freebsd-performance@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-performance
To unsubscribe, send any mail to "freebsd-performance-unsubscribe@xxxxxxxxxxx"



Relevant Pages

  • Re: FBSD 1GBit router?
    ... But speed is only about 382 Mbit. ... Let me disagree with this - while polling reduce CPU utilization it doesn't perform better. ... When the network is under pressure polling can lead to lost packets. ... After all one should test how polling works for him, but with polling enabled my intel network cards ...
    (freebsd-performance)
  • How to increase traffic
    ... kernel based on Generic but I have big problem with perfomance. ... I got from my line only about 130 Mbit, then my cpu is working on ... I tried set up polling but without success because after ...
    (freebsd-performance)
  • Re: How to increase traffic
    ... kernel based on Generic but I have big problem with perfomance. ... I got from my line only about 130 Mbit, then my cpu is working on ... I tried set up polling but without success because after ...
    (freebsd-performance)
  • RE: Polling For 100 mbps Connections? (Was Re: Freebsd Theme Song)
    ... My machine is Celeron 433 with 256 MB RAM and it is used as router. ... With iperf between DMZ and LAN with polling enabled I reach speed of 90 Mbit and without polling I can get speed only about 58 Mbit. ...
    (freebsd-questions)