Re: MODEM

From: Jerry Hicks (gehicks_at_alltel.net)
Date: 06/20/03

  • Next message: Ceri Davies: "Re: Mixing different arch's on a shared (NFS) ports tree" 
    Date: Fri, 20 Jun 2003 17:05:34 -0400
To: Claudiu Bichir <claudiubichir@yahoo.com>

    We got it the first time :-)

    Hrm, you are aware that 5.0 is an old developer-only release?

    I wouldn't be surprised if the USB code in that release was
    in rough shape.

    You probably really want FreeBSD-4.8 (or RELENG_4)

    Cheers,

    Jerry Hicks
    gehicks@alltel.net

    I'm still
    On Friday, June 20, 2003, at 04:59 PM, Claudiu Bichir wrote:

    > I have an Aztech UM9800 external modem but I don't know how to
    > configure it to work with FreeBSD.When my system boots I see
    > something like "ugen0:SMElectronics Communicator bla bla", I think
    > this is my modem ...
    > If anybody would like to help me configuring my modem to work with
    > FreeBSD I would appreciate that. I cannot use ppp ...
    > after I type "set device /dev/ugen0","set speed 115200","enable dns"
    > and "term" it says something like ... "ugenpoll: no edesc"(two times),
    > don't know why.
    > There is also a dial-up tool in KDE 3.0 but after I hit "Connect"
    > the whole system doesn't respond anymore and I must reboot it.
    > I hope my modem works with freebsd.
    >
    > dmesg:
    >
    > Copyright (c) 1992-2003 The FreeBSD Project.
    > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
    > 1994
    > The Regents of the University of California. All rights reserved.
    > FreeBSD 5.0-RELEASE #0: Fri Jun 20 20:55:07 EEST 2003
    > root@BSD:/usr/src/sys/i386/compile/BICHIR
    > Preloaded elf kernel "/boot/kernel/kernel" at 0xc04d0000.
    > Preloaded elf module "/boot/kernel/snd_via82c686.ko" at 0xc04d00a8.
    > Preloaded elf module "/boot/kernel/snd_pcm.ko" at 0xc04d015c.
    > Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04d0208.
    > Timecounter "i8254" frequency 1193182 Hz
    > Timecounter "TSC" frequency 949972222 Hz
    > CPU: AMD Athlon(tm) Processor (949.97-MHz 686-class CPU)
    > Origin = "AuthenticAMD" Id = 0x642 Stepping = 2
    > Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,
    > CMOV,PAT,PSE36,MMX,FXSR>
    > AMD Features=0xffffffffc0440000<RSVD,AMIE,DSP,3DNow!>
    > real memory = 268369920 (255 MB)
    > avail memory = 255696896 (243 MB)
    > Initializing GEOMetry subsystem
    > Pentium Pro MTRR support enabled
    > npx0: <math processor> on motherboard
    > npx0: INT 16 interface
    > acpi0: <VIA694 AWRDACPI> on motherboard
    > ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
    > Using $PIR table, 7 entries at 0xc00fddc0
    > acpi0: power button is handled as a fixed feature programming model.
    > Timecounter "ACPI-safe" frequency 3579545 Hz
    > acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
    > acpi_cpu0: <CPU> on acpi0
    > acpi_button0: <Power Button> on acpi0
    > pcib0: <ACPI Host-PCI bridge> port
    > 0x6000-0x607f,0x5000-0x500f,0x4080-0x40ff,0x4000-0x407f,0xcf8-0xcff on
    > acpi0
    > pci0: <ACPI PCI bus> on pcib0
    > agp0: <VIA 82C8363 (Apollo KT133A) host to PCI bridge> mem
    > 0xd8000000-0xdbffffff at device 0.0 on pci0
    > pcib1: <PCI-PCI bridge> at device 1.0 on pci0
    > pci1: <PCI bus> on pcib1
    > pci1: <display, VGA> at device 0.0 (no driver attached)
    > isab0: <PCI-ISA bridge> at device 7.0 on pci0
    > isa0: <ISA bus> on isab0
    > atapci0: <VIA 82C686 ATA100 controller> port 0xd000-0xd00f at device
    > 7.1 on pci0
    > atapci0: Correcting VIA config for southbridge data corruption bug
    > ata0: at 0x1f0 irq 14 on atapci0
    > ata1: at 0x170 irq 15 on atapci0
    > uhci0: <VIA 83C572 USB controller> port 0xd400-0xd41f irq 9 at device
    > 7.2 on pci0
    > usb0: <VIA 83C572 USB controller> on uhci0
    > usb0: USB revision 1.0
    > uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    > uhub0: 2 ports with 2 removable, self powered
    > ugen0: STMicroelectronics USB Communicator, rev 1.00/2.00, addr 2
    > ulpt0: Hewlett-Packard DeskJet 3820, rev 1.10/1.00, addr 3, iclass 7/1
    > ulpt0: using bi-directional mode
    > uhci1: <VIA 83C572 USB controller> port 0xd800-0xd81f irq 9 at device
    > 7.3 on pci0
    > usb1: <VIA 83C572 USB controller> on uhci1
    > usb1: USB revision 1.0
    > uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    > uhub1: 2 ports with 2 removable, self powered
    > pci0: <bridge, PCI-unknown> at device 7.4 (no driver attached)
    > pcm0: <VIA VT82C686A> port 0xe400-0xe403,0xe000-0xe003,0xdc00-0xdcff
    > irq 10 at device 7.5 on pci0
    > fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port
    > 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
    > fdc0: FIFO enabled, 8 bytes threshold
    > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    > sio0 port 0x3f8-0x3ff irq 4 on acpi0
    > sio0: type 16550A
    > sio1 port 0x2f8-0x2ff irq 3 on acpi0
    > sio1: type 16550A
    > ppc0 port 0x378-0x37f irq 7 on acpi0
    > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
    > plip0: <PLIP network interface> on ppbus0
    > lpt0: <Printer> on ppbus0
    > lpt0: Interrupt-driven port
    > ppi0: <Parallel I/O> on ppbus0
    > atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    > kbd0 at atkbd0
    > psm0: <PS/2 Mouse> irq 12 on atkbdc0
    > psm0: model IntelliMouse, device ID 3
    > orm0: <Option ROM> at iomem 0xcc000-0xcffff on isa0
    > pmtimer0 on isa0
    > sc0: <System console> at flags 0x100 on isa0
    > sc0: VGA <16 virtual consoles, flags=0x300>
    > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
    > isa0
    > Timecounters tick every 10.000 msec
    > acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0%
    > ad0: DMA limited to UDMA33, non-ATA66 cable or device
    > ad0: 19595MB <QUANTUM FIREBALLP AS20.5> [39813/16/63] at ata0-master
    > UDMA33
    > acd0: CDROM <54X CD-ROM> at ata0-slave PIO4
    > acd1: CD-RW <MSI CD-RW MS-8348> at ata1-slave PIO4
    > Mounting root from ufs:/dev/ad0s2a
    > <----------------dmesg end---------------->
    >
    > #################################################################
    > # PPP Sample Configuration File
    > # Originally written by Toshiharu OHNO
    > # Simplified 5/14/1999 by wself@cdrom.com
    > #
    > # See /usr/share/examples/ppp/ for some examples
    > #
    > # $FreeBSD: src/etc/ppp/ppp.conf,v 1.8 2001/06/21 15:42:26 brian Exp $
    > #################################################################
    > default:
    > set log Phase Chat LCP IPCP CCP tun command
    > ident user-ppp VERSION (built COMPILATIONDATE)
    > # Ensure that "device" references the correct serial port
    > # for your modem. (cuaa0 = COM1, cuaa1 = COM2)
    > #
    > set device /dev/cuaa1
    > set speed 115200
    > set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
    > \"\" AT OK-AT-OK ATE1Q0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
    > set timeout 180 # 3 minute idle timer (the default)
    > enable dns # request DNS info (for resolv.conf)
    > papchap:
    > #
    > # edit the next three lines and replace the items in caps with
    > # the values which have been assigned by your ISP.
    > #
    > set phone
    > set authname
    > set authkey
    > set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
    > add default HISADDR # Add a (sticky) default route
    > <---------------ppp.conf end--------------->
    >
    >
    > # -- sysinstall generated deltas -- # Fri Jun 20 20:36:25 2003
    > # Created: Fri Jun 20 20:36:25 2003
    > # Enable network daemons for user convenience.
    > # Please make all changes to this file, not to /etc/defaults/rc.conf.
    > # This file now contains just the overrides from /etc/defaults/rc.conf.
    > font8x14="/usr/share/syscons/fonts/iso15-8x14.fnt"
    > font8x16="/usr/share/syscons/fonts/iso15-8x16.fnt"
    > font8x8="/usr/share/syscons/fonts/iso15-8x8.fnt"
    > hostname="BSD"
    > kern_securelevel_enable="NO"
    > linux_enable="YES"
    > moused_enable="YES"
    > scrnmap="NO"
    > sendmail_enable="NO"
    > sshd_enable="YES"
    > usbd_enable="YES"
    > <---------------rc.conf end--------------->
    >
    > Thank
    > you,
    >
    > Claudiu.
    >
    >
    >
    > ---------------------------------
    > Do you Yahoo!?
    > SBC Yahoo! DSL - Now only $29.95 per month!
    > _______________________________________________
    > freebsd-questions@freebsd.org mailing list
    > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    > To unsubscribe, send any mail to
    > "freebsd-questions-unsubscribe@freebsd.org"
    >

    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

  • Next message: Ceri Davies: "Re: Mixing different arch's on a shared (NFS) ports tree"