Re: DVD/CD-RW not recognized (was: Re:)

From: Mica Telodico (maria_libera2000_at_yahoo.it)
Date: 07/25/03

  • Next message: Lowell Gilbert: "Re: mod_perl" 
    Date: Fri, 25 Jul 2003 20:17:02 +0200 (CEST)
To: fierman@puscii.nl, freebsd-questions@freebsd.org

    Yes , your message is identical to mine .
     
    And the dmesg is also similar too ( but the drives are
    different)

    What is your HW? (CPU , MoBo and drive with problems)

    Bye

    Marcello

    --- Fierman <fierman@puscii.nl> ha scritto: > On Fri,
    2003-07-25 at 15:03, Volker Kindermann
    > wrote:
    > > > ACD0 is only the DVD , CD-RW (a Liteon 52x 24x
    > 52x)
    > > > isn't found at all!! Literally from DMESG:
    > > >
    > > > ata0-slave: ATA identify retries excedeed
    > > >
    > > > and sometimes it doesn't find my DVD too , with
    > the
    > > > message :
    > > >
    > > > ata1-slave: ATA identify retries excedeed
    > > >
    > > > so, I'm without CD and DVD :cry:
    > > >
    > > > What I can do??
    > >
    > > first, you should check if the jumpers on all (!)
    > ATA devices are set
    > > correctly:
    > >
    > > Set the masters to "master" and the DVD and CDRW
    > to "slave" (not
    > > cable-select).
    > >
    > > If that doesn't help, check the cables. Perhaps
    > you have some spare
    > > cables and you can change them.
    > >
    > > If that doesn't help, provide us with your
    > complete dmesg.
    > > -volker
    > > ___
    >
    > this problem sounds like the exact one as i am
    > having, (see my mail to
    > this list:
    >
    > Subject:
    > ATA identify retries exceeded
    > (still!)
    > Date:
    > 24 Jul 2003 23:59:57 +0000
    >
    >
    > jumpersettings are all ok, no possible signs of
    > hardware itself being
    > faulty.
    >
    > dmesg :
    >
    > Copyright (c) 1992-2003 The FreeBSD Project.
    > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
    > 1991, 1992, 1993, 1994
    > The Regents of the University of California.
    > All rights
    > reserved.
    > FreeBSD 4.8-STABLE #0: Wed Jul 9 15:27:44 CEST 2003
    >
    >
    root@deeveedeedoos.puscii:/usr/obj/usr/src/sys/kernel100703
    > Timecounter "i8254" frequency 1193182 Hz
    > CPU: Intel Celeron (1002.28-MHz 686-class CPU)
    > Origin = "GenuineIntel" Id = 0x68a Stepping = 10
    >
    >
    Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
    > real memory = 133169152 (130048K bytes)
    > config> di bt0
    > config> di aic0
    > config> di aha0
    > config> di adv0
    > config> q
    > avail memory = 123887616 (120984K bytes)
    > Preloaded elf kernel "kernel" at 0xc058f000.
    > Preloaded userconfig_script "/boot/kernel.conf" at
    > 0xc058f09c.
    > Pentium Pro MTRR support enabled
    > md0: Malloc disk
    > Using $PIR table, 4 entries at 0xc00fdf30
    > npx0: <math processor> on motherboard
    > npx0: INT 16 interface
    > pcib0: <Intel 82810E (i810E GMCH) Host To Hub
    > bridge> on motherboard
    > pci0: <PCI bus> on pcib0
    > agp0: <Intel 82810E (i810E GMCH) SVGA controller>
    > mem
    > 0xd6000000-0xd607ffff,0xd0000000-0xd3ffffff irq 11
    > at device 1.0 on pci0
    > pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at
    > device 30.0 on pci0
    > pci1: <PCI bus> on pcib1
    > sis0: <SiS 900 10/100BaseTX> port 0xc000-0xc0ff mem
    > 0xd5000000-0xd5000fff irq 11 at device 4.0 on pci1
    > sis0: Ethernet address: 00:d0:09:84:d3:2c
    > miibus0: <MII bus> on sis0
    > ukphy0: <Generic IEEE 802.3u media interface> on
    > miibus0
    > ukphy0: 10baseT, 10baseT-FDX, 100baseTX,
    > 100baseTX-FDX, auto
    > pcm0: <CMedia CMI8738> port 0xc400-0xc4ff irq 10 at
    > device 5.0 on pci1
    > pci1: <unknown card> (vendor=0x13f6, dev=0x0211) at
    > 5.1 irq 3
    > isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at
    > device 31.0 on pci0
    > isa0: <ISA bus> on isab0
    > atapci0: <Intel ICH ATA66 controller> port
    > 0xf000-0xf00f at device 31.1
    > on pci0
    > ata0: at 0x1f0 irq 14 on atapci0
    > ata1: at 0x170 irq 15 on atapci0
    > uhci0: <Intel 82801AA (ICH) USB controller> port
    > 0xd000-0xd01f irq 4 at
    > device 31.2 on pci0
    > usb0: <Intel 82801AA (ICH) USB controller> on uhci0
    > usb0: USB revision 1.0
    > uhub0: Intel UHCI root hub, class 9/0, rev
    > 1.00/1.00, addr 1
    > uhub0: 2 ports with 2 removable, self powered
    > orm0: <Option ROMs> at iomem
    > 0xc0000-0xc9fff,0xcc000-0xcffff on isa0
    > fdc0: <NEC 72065B or clone> at port
    > 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
    > isa0
    > fdc0: FIFO enabled, 8 bytes threshold
    > fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    > atkbdc0: <Keyboard controller (i8042)> at port
    > 0x60,0x64 on isa0
    > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    > kbd0 at atkbd0
    > psm0: <PS/2 Mouse> irq 12 on atkbdc0
    > psm0: model Generic PS/2 mouse, device ID 0
    > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
    > 0xa0000-0xbffff on
    > isa0
    > sc0: <System console> at flags 0x100 on isa0
    > sc0: VGA <16 virtual consoles, flags=0x300>
    > sio0: configured irq 4 not in bitmap of probed irqs
    > 0
    > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    > sio0: type 8250
    > sio1: configured irq 3 not in bitmap of probed irqs
    > 0
    > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
    > isa0
    > ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE
    > mode
    > ppc0: FIFO with 16/16/16 bytes threshold
    > plip0: <PLIP network interface> on ppbus0
    > lpt0: <Printer> on ppbus0
    > lpt0: Interrupt-driven port
    > ppi0: <Parallel I/O> on ppbus0
    > ata0-slave: ATA identify retries exceeded
    > ad0: 38172MB <MAXTOR 6L040J2> [77557/16/63] at
    > ata0-master UDMA33
    > Mounting root from ufs:/dev/ad0s1a
    >
    >
    >
    > thnx in advance,
    > fierman
    >
    >
    >
    > _______________________________________________
    > freebsd-questions@freebsd.org mailing list
    >
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    > To unsubscribe, send any mail to
    "freebsd-questions-unsubscribe@freebsd.org"

    ______________________________________________________________________
    Yahoo! Mail: 6MB di spazio gratuito, 30MB per i tuoi allegati, l'antivirus, il filtro Anti-spam
    http://it.yahoo.com/mail_it/foot/?http://it.mail.yahoo.com/
    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

  • Next message: Lowell Gilbert: "Re: mod_perl"

    Relevant Pages

    • Re: HT not working by default since 2.4.22
      ... > relevant parts of dmesg follow: ... Forgot to attach the .config, ... To unsubscribe from this list: send the line "unsubscribe linux-kernel" in ...
      (Linux-Kernel)
    • Re: Outlook is trying to retrieve data
      ... Here is the optimal config that I have ... come across for Exchange ... 3x hard drives RAID5 for databases. ... that switch should be added. ...
      (microsoft.public.exchange.admin)
    • Re: Making a new drive the Boot drive has failed to work
      ... CONFIG FINAL ... SCSI ID0 and disconnect the SCSI cable from IBM & FUJ drives. ... The data for partition 1 is: ...
      (comp.unix.bsd.freebsd.misc)
    • Re: Storageworks shelves
      ... Behind the fans are the terminator and the connector. ... > A BA350 doesn't use a personality module, ... >> since taken out two drives from the one that works as RSTS refuses to ... config menu. ...
      (comp.os.vms)
    • Re: XP Home install on a sata drive setup?
      ... The current config is a D865PERL with one 40G ide hd ... connected as master and no sata drives installed. ... doing an install from scratch, will I need any special drivers ... Is your RAID 0 configured in the motherboard BIOS or does it require ...
      (microsoft.public.windowsxp.basics)