Re: Kernel wont compile

From: Larry Rosenman (ler_at_lerctr.org)
Date: 08/04/03

  • Next message: Bob Collins: "Re: Samba and $"
    Date: Mon, 04 Aug 2003 15:16:27 -0500
    To: Stefan Malte Schumacher <s.schumacher@netcologne.de>, freebsd-questions@freebsd.org
    
    

    include device miibus in your config

    --On Monday, August 04, 2003 22:14:46 +0200 Stefan Malte Schumacher
    <s.schumacher@netcologne.de> wrote:

    > Hi
    >
    > I am currently trying to compile a new kernel for FreeBSD but I get the
    > following error after I enter 'make depend'.
    >
    > ../../../pci/if_rl.c:119:23: miibus_if.h: No such file or directory
    > ../../../pci/if_xl.c:140:23: miibus_if.h: No such file or directory
    > mkdep: compile failed
    > *** Error code 1
    >
    > Stop in /usr/src/sys/i386/compile/AVALON1.
    > *** Error code 1
    >
    > Stop in /usr/src/sys/i386/compile/AVALON1.
    >
    > Make lint also does not work this time I get the following error message
    > :
    >
    > __mb_cur_max declared( fileaccess.c?(4) ), but never used or defined
    > ===> boot/i386
    > ===> boot/i386/mbr
    > lint -cghapbx
    > usage: lint [-abceghprvwxzHF] [-s|-t] [-i|-nu] [-Dname[=def]] [-Uname] [-X
    > <id>[
    > ,<id>]...
    > [-Idirectory] [-Ldirectory] [-llibrary] [-ooutputfile] file...
    > lint [-abceghprvwzHF] [-s|-t] -Clibrary [-Dname[=def]]
    > [-X <id>[,<id>]...
    > [-Idirectory] [-Uname] [-Bpath] file ...
    > *** Error code 1
    >
    > Stop in /usr/src/sys/boot/i386/mbr.
    > *** Error code 1
    >
    > Stop in /usr/src/sys/boot/i386.
    > *** Error code 1
    >
    > Stop in /usr/src/sys/boot.
    > *** Error code 1
    >
    > Stop in /usr/src/sys.
    >
    >
    >
    >
    > I am running FreeBSD 5.1-Release.
    >
    > I have read that it might be necessary to to a make world before I use the
    > new way of compiling and installing kernels. I probably have to make world
    > in /usr/src, correct ? How lang will this approximately take on an Athlon
    > 2600 and do I have to install the stuff I built with make world or is it
    > enough if I just build it.
    >
    > Bye
    > Stefan
    > _______________________________________________
    > freebsd-questions@freebsd.org mailing list
    > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    > To unsubscribe, send any mail to
    > "freebsd-questions-unsubscribe@freebsd.org"
    >

    -- 
    Larry Rosenman                     http://www.lerctr.org/~ler
    Phone: +1 972-414-9812                 E-Mail: ler@lerctr.org
    US Mail: 1905 Steamboat Springs Drive, Garland, TX 75044-6749
    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
    

  • Next message: Bob Collins: "Re: Samba and $"

    Relevant Pages

    • Re: Cannot open root device "hda1" or unknown-block(0,0)
      ... driver because it causes me some troubles (see ... I take it you compiled your own kernel. ... I used to compile the old way but find that kernel-package ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ...
      (Debian-User)
    • SMBus / I2C h/w sensors and FreeBSD 5.1
      ... I am trying to get my h/w sensors working on my FreeBSD 5.1-RELEASE-p10 ... device smb0 at smbus? ... With those options, a 5.1 kernel does not compile, so after looking ...
      (freebsd-current)
    • Re: radeon
      ... >> with the kernel of the new one, and the X server of the old one. ... >> have both the collection of ports available. ... is definitely other than FreeBSD. ... To unsubscribe, ...
      (freebsd-questions)
    • Re: Computer freezes with linux-image-2.6.21-2
      ... for example if you have compiled any module/driver for you video card for the old kernel and not for the new; ... I did not compile anything special... ... "Mis soldados dependen del dinero, que depende de la fuerza, que depende de ellos mismos." ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". ...
      (Debian-User)
    • Re: Review of FreeBSD 5.4
      ... > kernel mailing list archives. ... > Theo Raadt's statements on Linux. ... Is it guarantied you can compile anything from FreeBSD-Current? ... FreeBSD 4.11 isn't at all compilable using GCC 4.0! ...
      (comp.unix.bsd.freebsd.misc)