Problem with PCMCIA Services 5.1-STABLE

From: Tim Lyons (lyons_at_digitalvoodoo.org)
Date: 09/25/03

  • Next message: Seth Kingsley: "Re: yahoo messenger" 
    Date: Thu, 25 Sep 2003 04:18:20 -0400 (EDT)
To: freebsd-questions@freebsd.org

    Hi,

    I recently picked up a used Sony Vaio PCG-FX390 laptop. It had Windows XP on
    it so I decided to install FreeBSD 5.1-STABLE.

    Long Story short, the install went great except the PCMCIA bridge seems to be
    misconfigured. I've googled for two days trying to find the answer but have
    not come up with anything that works. If I try and insert/remove a card the
    system locks up and I'm forced to hard-power the box. If I boot with card(s)
    inserted, I get "Unsupported Card type detected" although I'm using card(s)
    that are supported and work under RH Linux 9 and Windows.

    I even went back to GENERIC before sending this to get the box baseline.

    _any_ pointers would be appreciated.

    --Tim

    /etc/defaults/pccard.conf
    io 0x240-0x360
    irq 10 11 15
    memory 0xd4000 96k
    debuglevel 4

    dmesg output:

    rebooting...
    Copyright (c) 1992-2003 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 5.1-RELEASE-p5 #0: Wed Sep 24 23:13:21 EDT 2003
        root@:/usr/obj/usr/src/sys/GENERIC
    Preloaded elf kernel "/boot/kernel/kernel" at 0xc06d4000.
    Preloaded elf module "/boot/kernel/acpi.ko" at 0xc06d42bc.
    Timecounter "i8254" frequency 1193182 Hz
    Timecounter "TSC" frequency 993660627 Hz
    CPU: Intel Pentium III (993.66-MHz 686-class CPU)
      Origin = "GenuineIntel" Id = 0x68a Stepping = 10
      Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
    real memory = 401080320 (382 MB)
    avail memory = 382087168 (364 MB)
    Pentium Pro MTRR support enabled
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    acpi0: <SONY U0 > on motherboard
    pcibios: BIOS version 2.10
    Using $PIR table, 9 entries at 0xc00fdf30
    Timecounter "ACPI-fast" frequency 3579545 Hz
    acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
    acpi_cpu0: <CPU> on acpi0
    acpi_tz0: <thermal zone> on acpi0
    acpi_lid0: <Control Method Lid Switch> on acpi0
    acpi_button0: <Power Button> on acpi0
    pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
    pci0: <ACPI PCI bus> on pcib0
    agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem 0xf4000000-0xf407ffff,0xf8000000-0xfbffffff irq 9 at device 2.0 on pci0
    pcib1: <ACPI PCI-PCI bridge> at device 30.0 on pci0
    pci1: <ACPI PCI bus> on pcib1
    fwohci0: <Texas Instruments TSB43AA22> mem 0xf4100000-0xf4103fff,0xf4105000-0xf41057ff irq 9 at device 0.0 on pci1
    fwohci0: OHCI version 1.0 (ROM=1)
    fwohci0: No. of Isochronous channel is 4.
    fwohci0: EUI64 08:00:46:03:00:d5:21:8d
    fwohci0: Phy 1394a available S400, 2 ports.
    fwohci0: Link S400, max_rec 2048 bytes.
    firewire0: <IEEE1394(FireWire) bus> on fwohci0
    if_fwe0: <Ethernet over FireWire> on firewire0
    if_fwe0: Fake Ethernet address: 0a:00:46:d5:21:8d
    sbp0: <SBP2/SCSI over firewire> on firewire0
    fwohci0: Initiate bus reset
    cbb0: <RF5C476 PCI-CardBus Bridge> at device 2.0 on pci1
    cardbus0: <CardBus bus> on cbb0
    pccard0: <16-bit PCCard bus> on cbb0
    pcib1: possible interrupts: 9
    pcib1: slot 2 INTA routed to irq 9 via \\_SB_.LNKC
    cbb1: <RF5C476 PCI-CardBus Bridge> at device 2.1 on pci1
    cardbus1: <CardBus bus> on cbb1
    pccard1: <16-bit PCCard bus> on cbb1
    pcib1: possible interrupts: 9
    pcib1: slot 2 INTB routed to irq 9 via \\_SB_.LNKD
    fxp0: <Intel 82801BA/CAM (ICH2/3) Pro/100 Ethernet> port 0x3000-0x303f mem 0xf4104000-0xf4104fff irq 9 at device 8.0 on pci1
    fxp0: Ethernet address <snip>
    miibus0: <MII bus> on fxp0
    inphy0: <i82562ET 10/100 media interface> on miibus0
    inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    isab0: <PCI-ISA bridge> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <Intel ICH2 UDMA100 controller> port 0x1800-0x180f at device 31.1 on pci0
    ata0: at 0x1f0 irq 14 on atapci0
    ata1: at 0x170 irq 15 on atapci0
    uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0x1820-0x183f irq 9 at device 31.2 on pci0
    usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0
    usb0: USB revision 1.0
    uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
    uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0x1840-0x185f irq 9 at device 31.4 on pci0
    usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1
    usb1: USB revision 1.0
    uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub1: 2 ports with 2 removable, self powered
    pci0: <multimedia, audio> at device 31.5 (no driver attached)
    pci0: <simple comms> at device 31.6 (no driver attached)
    atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
    atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
    kbd0 at atkbd0
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: model GlidePoint, device ID 0
    acpi_ec0: <embedded controller> port 0x66,0x62 on acpi0
    sio0 port 0x3f8-0x3ff irq 4 on acpi0
    sio0: type 16550A
    ppc0 port 0x778-0x77f,0x378-0x37f irq 7 drq 3 on acpi0
    ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/15 bytes threshold
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on acpi0
    fdc0: FIFO enabled, 8 bytes threshold
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    acpi_cmbat0: <Control method Battery> on acpi0
    acpi_cmbat1: <Control method Battery> on acpi0
    acpi_acad0: <AC adapter> on acpi0
    orm0: <Option ROMs> at iomem 0xdc000-0xdffff,0xd8000-0xdbfff,0xc0000-0xcbfff on isa0
    pmtimer0 on isa0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sio1: configured irq 3 not in bitmap of probed irqs 0
    sio1: port may not be enabled
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    Timecounters tick every 10.000 msec
    fwohci0: BUS reset
    fwohci0: node_id=0xc000ffc0, gen=1, CYCLEMASTER mode
    firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
    firewire0: bus manager 0 (me)
    acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
    cbb0: Unsupported card type detected
    cbb1: Unsupported card type detected
    ata1-slave: ATAPI identify retries exceeded
    ad0: 28615MB <IC25N030ATDA04-0> [58140/16/63] at ata0-master UDMA100
    acd0: CD-RW <UJDA710> at ata1-master PIO4
    Mounting root from ufs:/dev/ad0s3a
    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

  • Next message: Seth Kingsley: "Re: yahoo messenger"