Re: SCSI DAT tape drive
From: Bob Collins (freebsd_at_anything-inc.com)
Date: 09/30/03
- Previous message: Naveen Glore: "Re: Changing from POP3 server to IMAP server"
- In reply to: Darryl Hoar: "SCSI DAT tape drive"
- Next in thread: Jerry McAllister: "Re: SCSI DAT tape drive"
- Reply: Jerry McAllister: "Re: SCSI DAT tape drive"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Tue, 30 Sep 2003 15:48:13 -0400 To: darryl@osborne-ind.com
At 03:40 PM 9/30/2003, Darryl Hoar wrote:
>Greetings,
>I just finished installing FreeBSD 4.7 on my box. My machine has an adaptec
>SCSI
>host adapter and a SCSI Dat tape drive. I expected to access my tape drive
>through
>the /dev/rmt device, but instead must use /dev/sa0 (I think this is right.
>I'm going
>from memory as I'm not at the machine right now).
>
>Is this the normal device to reference when reading/writing to the scsi dat
>tape drive ?
>
>thanks,
>-D
My IBM DDS2 drive is attached to my onboard Adaptec SCSI port and it only
works when referred to as /dev/sa0. There are many /dev/listings for the
drive, however there are complaints with some software, like Bacula, when I
try to use the /dev/rsa0. So, I assume that /dev/sa0 is okay.
Bob
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
- Previous message: Naveen Glore: "Re: Changing from POP3 server to IMAP server"
- In reply to: Darryl Hoar: "SCSI DAT tape drive"
- Next in thread: Jerry McAllister: "Re: SCSI DAT tape drive"
- Reply: Jerry McAllister: "Re: SCSI DAT tape drive"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
