Re: digicam on ugen0

From: David L (dlodeiro_at_inspired.net.au)
Date: 09/21/03

  • Next message: a d: "user restriction with login.conf" 
    To: *** hoogendijk <***@nagual.st>
Date: Sun, 21 Sep 2003 11:33:21 +1000

    You should be able to mount it as you would a usb hard drive, these are
    reffered to as USB mass storage. This is what I get when I connect my
    panasonic digicam

    da0: <MATSHITA DMC-LC20 > Removable Direct Access SCSI-2 device
    da0: 1.000MB/s transfers
    da0: 29MB (60801 512 byte sectors: 64H 32S/T 29C)
    (da0:umass-sim0:0:0:0): READ(6)/WRITE(6) not supported, increasing
    minimum_cmd_size to 10.

    now if I look at my /dev directory I can see

    da0
    da0s1

     Of course theres a lot more in my /dev/ directory but this is the only part
    thatt is relevant.
    I do this logged in as root, however it should be possible to do this whilst
    logged in as user by putting an entry in /etc/fstab

    # mount -t msdos /dev/da0s1 /mnt
    # cd /mnt
    # ls
    DCIM P1010685.JPG P1010694.JPG P1010703.JPG P1010712.JPG
    MISC P1010686.JPG P1010695.JPG P1010704.JPG P1010713.JPG
    P1010678.JPG P1010687.JPG P1010696.JPG P1010705.JPG P1010714.JPG
    P1010679.JPG P1010688.JPG P1010697.JPG P1010706.JPG P1010715.JPG
    P1010680.JPG P1010689.JPG P1010698.JPG P1010707.JPG P1010716.JPG
    P1010681.JPG P1010690.JPG P1010699.JPG P1010708.JPG P1010717.JPG
    P1010682.JPG P1010691.JPG P1010700.JPG P1010709.JPG P1010718.JPG
    P1010683.JPG P1010692.JPG P1010701.JPG P1010710.JPG ignore_my_docs
    P1010684.JPG P1010693.JPG P1010702.JPG P1010711.JPG

    #

    There you go, that is my digital camera sd card contents

    After looking in

    http://www.teaser.fr/~hfiguiere/linux/digicam.html

    it appears that your digital camera also uses the USB mass storage protocal,
    Therefore your procedure shouild be very similar to mine.

    Hope this helps

    David L

    > I plugged my digicam HP Photosmart 618 into my FreeBSD-4 and it was
    > recognised immediately. Great. It's on /dev/ugen0
    > But how can I access the camera- or rather the pictures on it?

    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

  • Next message: a d: "user restriction with login.conf"
    Loading