NIC &boot errors

• Previous message: Payne: "ls and color"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Date: Fri, 5 Dec 2003 10:25:06 -0800 (PST)
To: freebsd-questions@freebsd.org

Hi everyone! I have a PCI NIC: RealTek 8029. the
problem is this one: when i didnt put in my config
file the line:"device ed0 at isa? disable port 0x280
irq 10 iomem 0xd8000" i couldnt use my NIC, and my NIC
is on PCI(and ed0 is for isa)...The dmesg.boot file in
this case is bad.boot(atached to this e-mail).When i
put that line, i can use the NIC. In both cases the
config files are the same(only that line is the
difference)(the config file is atached to this
e-mail:k).The dmesg.boot file in the case with that
line is last.boot(atached to this e-mail). The second
problem is why do i get those errors(at the begining
of last.boot). In the case of last.boot i get this
error(after root is logged in):dhclient: send-packet:
Adress family not supported by protocol family. Thank
you very much for reading this e-mail. And sorry for
my English.

sory but i cant atach more files and i will show the
the GENERIC dmesg.boot here: Copyright (c) 1992-2003
The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989,
1991, 1992, 1993, 1994
        The Regents of the University of California. All
rights reserved.
FreeBSD 4.9-RELEASE #0: Mon Oct 27 17:51:09 GMT 2003
   
root@freebsd-stable.sentex.ca:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium/P55C (149.69-MHz 586-class CPU)
  Origin = "GenuineIntel" Id = 0x543 Stepping = 3
 
Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX>
real memory = 50331648 (49152K bytes)
avail memory = 43659264 (42636K bytes)
Preloaded elf kernel "kernel.old" at 0xc053f000.
Intel Pentium detected, installing workaround for F00F
bug
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0
on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> port
0xf000-0xf00f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
ed0: <NE2000 PCI Ethernet (RealTek 8029)> port
0x6100-0x611f irq 11 at device 19.0 on pci0
ed0: address 00:4f:49:03:da:db, type NE2000 (16 bit)
pci0: <Cirrus Logic GD5446 SVGA controller> at 20.0
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7
irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on
isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 2441MB <WDC AC22500L> [4960/16/63] at ata0-master
WDMA2
ad2: DMA limited to UDMA33, non-ATA66 cable or device
ad2: 19881MB <Maxtor 6E020L0> [40395/16/63] at
ata1-master WDMA2
Mounting root from ufs:/dev/ad0s2a

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/

_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

• application/octet-stream attachment: bad.boot

• application/octet-stream attachment: last.boot

• application/octet-stream attachment: k

• Previous message: Payne: "ls and color"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]