Re: ZOT Print Server....
From: Lee Mx (lee_ver_mx_at_hotmail.com)
Date: 12/31/03
- Previous message: Michael W. Oliver: "Re: x10d X10 interface controller: not compiling (4.9) (Also: other X10 apps?)"
- Maybe in reply to: Eric F Crist: "ZOT Print Server...."
- Next in thread: Eric F Crist: "Re: ZOT Print Server...."
- Reply: Eric F Crist: "Re: ZOT Print Server...."
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: ecrist@adtechintegrated.com, jesse@wingnet.net, freebsd-questions@freebsd.org Date: Tue, 30 Dec 2003 18:52:35 -0800
>From: Eric F Crist <ecrist@adtechintegrated.com>
>To: "Lee Mx" <lee_ver_mx@hotmail.com>,
>jesse@wingnet.net,freebsd-questions@freebsd.org
>Subject: Re: ZOT Print Server....
>Date: Tue, 30 Dec 2003 19:42:51 -0600
>
>On Tuesday 30 December 2003 07:22 pm, Lee Mx wrote:
> > I forgot to ask in the previous email but if it doesn't help would you
>post
> > your printcap entry.
> >
> > thanks
>
>Sorry, that was really my bad. Here it is. Note that the top entry is for
>the parallel connection, which does work if it's connected. The bottom
>entry
>is the non-working network connection.
>
>TIA
>
>--
>Eric F Crist
>AdTech Integrated Systems, Inc
>(612) 998-3588
>
>-----PRINTCAP ENTRIES-----
>
># APS1_BEGIN:printer1
># - don't delete start label for apsfilter printer1
># - no other printer defines between BEGIN and END LABEL
>lp|pcl3/unspec;r=300x300;q=medium;c=mono;p=letter;m=auto:\
> :lp=/dev/lpt0:\
> :if=/usr/local/etc/apsfilter/basedir/bin/apsfilter:\
> :sd=/var/spool/lpd/lp:\
> :lf=/var/spool/lpd/lp/log:\
> :af=/var/spool/lpd/lp/acct:\
> :mx#0:\
> :sh:
># APS1_END - don't delete this
># APS2_BEGIN:printer2
># - don't delete start label for apsfilter printer2
># - no other printer defines between BEGIN and END LABEL
>lp1|pcl3/unspec;r=300x300;q=medium;c=mono;p=letter;m=auto:\
> :lp=:\
> :rm=192.168.1.2:\
> :rp=laser:\
> :if=/usr/local/etc/apsfilter/basedir/bin/apsfilter:\
> :sd=/var/spool/lpd/lp1:\
> :lf=/var/spool/lpd/lp1/log:\
> :af=/var/spool/lpd/lp1/acct:\
> :mx#0:\
> :sh:
># APS2_END - don't delete this
>
The only difference between your entry and mine is the rp that I commented
out for some reason that I don't remember right now. I assume that you get
no errors.
What do
# lpc status lp1
# lpc restart lp1
give you? I get:
# lpc status lp
lp:
queuing is enabled
printing is enabled
no entries in spool area
printer idle
# lpc restart lp
lp:
no daemon to abort
printing enabled
daemon restarted
I'm just guessing now. I have no idea unless one of the above commands
gives you an error. The only thing that bothers me is the rp entry that I
commented out and on another box I ended up with rp=raw.
Good luck,
_________________________________________________________________
Expand your wine savvy — and get some great new recipes — at MSN Wine.
http://wine.msn.com
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
- Previous message: Michael W. Oliver: "Re: x10d X10 interface controller: not compiling (4.9) (Also: other X10 apps?)"
- Maybe in reply to: Eric F Crist: "ZOT Print Server...."
- Next in thread: Eric F Crist: "Re: ZOT Print Server...."
- Reply: Eric F Crist: "Re: ZOT Print Server...."
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
