cdrecord problems

From: Andrew Thomson (andrewjt_at_applecomm.net)
Date: 01/14/04

  • Next message: Charles Swiger: "Re: 5.2, SYSVSHM and IPFILTER"
    To: freebsd-questions@freebsd.org
    Date: Wed, 14 Jan 2004 11:23:21 +1100
    
    

    Just trying to write a cd under 5.2 but am having some issues. Relevant
    output below.

    Thoughts?

    1,0,0 100) 'LG ' 'CD-ROM CRD-8400B' '1.04' Removable CD-ROM
    1,1,0 101) 'CREATIVE' 'CD-RW RW1210E ' 'LCS6' Removable CD-ROM

    # cdrecord -v -eject dev=1,1,0 5.2-RELEASE-i386-miniinst.iso
    Cdrecord 2.00.3 (i386-unknown-freebsd5.2) Copyright (C) 1995-2002
    J\xf6rg Schill
    ing
    TOC Type: 1 = CD-ROM
    scsidev: '1,1,0'
    scsibus: 1 target: 1 lun: 0
    Using libscg version 'schily-0.7'
    atapi: 0
    Device type : Removable CD-ROM
    Version : 0
    Response Format: 1
    Vendor_info : 'CREATIVE'
    Identifikation : 'CD-RW RW1210E '
    Revision : 'LCS6'
    Device seems to be: Generic mmc CD-RW.
    Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
    Driver flags : MMC SWABAUDIO BURNFREE
    Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96P RAW/R96R
    Drive buf size : 1658880 = 1620 KB
    FIFO size : 4194304 = 4096 KB
    Track 01: data 236 MB
    Total size: 271 MB (26:55.60) = 121170 sectors
    Lout start: 272 MB (26:57/45) = 121170 sectors
    Current Secsize: 2048
    ATIP info from disk:
      Indicated writing power: 4
      Is not unrestricted
      Is not erasable
      Disk sub type: Medium Type A, high Beta category (A+) (3)
      ATIP start of lead in: -11077 (97:34/23)
      ATIP start of lead out: 359848 (79:59/73)
    Disk type: Long strategy type (Cyanine, AZO or similar)
    Manuf. index: 11
    Manufacturer: Mitsubishi Chemical Corporation
    Blocks total: 359848 Blocks current: 359848 Blocks remaining: 238678
    Starting to write CD/DVD at speed 12 in real TAO mode for single
    session.
    Last chance to quit, starting real write 0 seconds. Operation starts.
    Waiting for reader process to fill input buffer ... input buffer ready.
    BURN-Free is OFF.
    Performing OPC...
    cdrecord: Input/output error. send opc: scsi sendcmd: retryable error
    CDB: 54 01 00 00 00 00 00 00 00 00
    status: 0x2 (CHECK CONDITION)
    Sense Bytes: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
    00 00 0
    0 00 00 00 00 00 00 00 00 00
    Sense Key: 0xFFFFFFFF [], Segment 0
    Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
    Sense flags: Blk 0 (not valid)
    cmd finished after 0.000s timeout 60s
    cdrecord: OPC failed.
    Writing time: 4.456s
    cdrecord: fifo had 64 puts and 0 gets.
    cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"


  • Next message: Charles Swiger: "Re: 5.2, SYSVSHM and IPFILTER"

    Relevant Pages

    • yet another cdrecord problem
      ... Using generic SCSI-3/mmc CD-R driver. ... Disk sub type: High speed Rewritable media ... cdrecord: Input/output error. ... close track/session: scsi sendcmd: retryable error ...
      (comp.unix.bsd.openbsd.misc)
    • Problems with CDRecord and a (new) Yamaha CRW-F1 SCSI recorder
      ... normal disk device identified as "YAMAHA CRW-F1S". ... using both CDRECORD V1.8a9 (which was on the system ... but any attempt to burn at any speed results in a series of SCSI ... cmd finished after 82.869s timeout 40s ...
      (comp.os.vms)
    • [SLE] resmgr + cdrecord
      ... TOC Type: 1 = CD-ROM ... cdrecord: Resource temporarily unavailable. ... I suspect resmgr is at fault, but I cannot figure out exactly how. ... the exclude rules must come first, ...
      (SuSE)
    • Re: cant mount drive
      ... I cant use konqoreor or just do a mount ... Are you using a CD_RW disk ... > cdrecord: Drive needs to reload the media to return to proper status. ...
      (Fedora)
    • SUMMARY: Suggestions for IDE DVD Writer on SPARC/Solaris (fwd)
      ... I missed the posting the first time, but would give one bit of warning. ... > We use this with cdrecord and ProDVD, ... > DVD +RW disk, cdrecord does not fully support this format yet. ...
      (SunManagers)