Re: Logitech Cordless MX Duo

From: Eric F Crist (ecrist_at_adtechintegrated.com)
Date: 01/17/04

  • Next message: Adam McLaurin: "squid-2.5.4_6 warning: port must be >1024"
    To: "Thomas Moyer" <tommoyer@charter.net>, <freebsd-questions@FreeBSD.ORG>
    Date: Fri, 16 Jan 2004 22:58:23 -0600
    
    
    

    On Friday 16 January 2004 09:39 pm, Thomas Moyer wrote:
    > I'm not exactly sure if I just missed something on Google but after a
    > lot of searching I couldn't find anything. I have a Logitech Cordless
    > MX Duo. And for some reason when I test the moused during install it
    > works but the motion of the pointer is incredibly slow and jerky. The
    > computer is running 5.2-RELEASE and the behavior presists through the
    > install and into X. The keyboard is USB converted to PS/2 with included
    > adapter and the mouse is PS/2. The keyboard and mouse are shared
    > between two computers with a KVM.

    Aside from the KVM, I have that same keyboard and mouse, that I'm using with
    no problem to speak of. Is it possibly a problem with the KVM? The only
    thing I've noticed is that with the MX Duo, my pointer seems to be offset by
    about 4 pixels from where it seems to be.

    -- 
    Eric F Crist
    AdTech Integrated Systems, Inc
    (612) 998-3588
    
    



  • Next message: Adam McLaurin: "squid-2.5.4_6 warning: port must be >1024"

    Relevant Pages

    • Re: Problems with "HAL.DLL" not found
      ... Am about to go to the lab and try connecting directly - bypassing the kvm. ... Just reviewed the component list and it appears all the standard PS/2 ... drivers for the mouse and keyboard were included in the build. ... Adora Belle Dearheart ...
      (microsoft.public.windowsxp.embedded)
    • Re: USB Keyboard to PS/2 and back to USB
      ... I have the Y cable you described (2 PS/2 connections in, ... connection out) and it works very well for the back end of the KVM ... end (from the keyboard to the KVM). ... >> keyboard port using that Microsoft Mouse dongle that I already have, ...
      (microsoft.public.windowsxp.hardware)
    • Re: Sending udev event manually
      ... I'm using a docking station and PS/2 mouse and keyboard. ... The KVM is supposed to keep the signal for mouse for all the systems. ...
      (Fedora)
    • Re: keyboard stops working
      ... now the KVM won't switch to that channel (the new PC second monitor) unless ... I don't want to connect the keyboard on the new PC to the KVM ... check which PS/2 slot you have the keyboard plugged into. ...
      (microsoft.public.windowsxp.hardware)
    • Summary: KVMs, LK461 and DECwindows
      ... Some time ago, I started a thread titled, "KVM between PWS600au ... using an LK461-A2 keyboard, the 6-key editing keypad, function keys ... and the numeric keypad minus keys are mapped incorrectly on ... Adder, Raritan and Rose Electronics. ...
      (comp.os.vms)