Re: builworld failure after cvsup on 4.9

• Previous message: Peter Schuller: "Re: What OS should I use?"
• In reply to: Nelis Lamprecht: "builworld failure after cvsup on 4.9"
• Next in thread: Nelis Lamprecht: "Re: builworld failure after cvsup on 4.9"
• Reply: Nelis Lamprecht: "Re: builworld failure after cvsup on 4.9"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

To: freebsd-questions@freebsd.org, nelis@8ball.co.za
Date: Mon, 9 Feb 2004 04:45:28 -0800

On Monday 09 February 2004 01:12 am, Nelis Lamprecht wrote:
> Hi,
>
> I am busy setting up a new dual HP server ( ML350 Xeon 2.8ghz ) and
> have cvsup the latest source and compiling just the basic options to
> get SMP working so I can continue my work. Make buildworld is failing
> with the following error which makes no sense to me. ( using FreeBSD
> 4.9 - RELENG_4 )

Are you using one of the versions of bash for your shell? Someone had a
problem like that before and people running csh didn't.

Kent

>
> ===> usr.bin
> "/usr/src/share/mk/bsd.subdir.mk", line 60: Inconsistent operator for
> ftp
> make: fatal errors encountered -- cannot continue
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
> *** Error code 1
>
> Stop in /usr/src.
>
> The line/s in question:
>
> ${SUBDIR}::
> @if test -d ${.TARGET}.${MACHINE_ARCH}; then \
> cd ${.CURDIR}/${.TARGET}.${MACHINE_ARCH}; \
> else \
> cd ${.CURDIR}/${.TARGET}; \
> fi; \
> ${MAKE} all
>
>
> Any idea's ?
>
> Below is my kernel config:
>
> machine i386
> cpu I686_CPU
> ident GUARDIAN
> maxusers 0
>
> options INET #InterNETworking
> options FFS #Berkeley Fast Filesystem
> options FFS_ROOT #FFS usable as root device
> [keep this!]
> options SOFTUPDATES #Enable FFS soft updates
> support options UFS_DIRHASH #Improve performance
> on big directories
> options MFS #Memory Filesystem
> options MD_ROOT #MD is a potential root
> device options NFS #Network Filesystem
> options NFS_ROOT #NFS usable as root device,
> NFS required
> options MSDOSFS #MSDOS Filesystem
> options CD9660 #ISO 9660 Filesystem
> options CD9660_ROOT #CD-ROM usable as root,
> CD9660 required
> options PROCFS #Process filesystem
> options COMPAT_43 #Compatible with BSD 4.3
> [KEEP THIS!]
> options SCSI_DELAY=5000 #Delay (in ms) before probing
> SCSI
> options UCONSOLE #Allow users to grab the
> console options USER_LDT #allow user-level
> control of i386 ldt
> options USERCONFIG #boot -c editor
> options VISUAL_USERCONFIG #visual boot -c editor
> options KTRACE #ktrace(1) support
> options SYSVSHM #SYSV-style shared memory
> options SYSVMSG #SYSV-style message queues
> options SYSVSEM #SYSV-style semaphores
> options P1003_1B #Posix P1003_1B real-time
> extensions
> options _KPOSIX_PRIORITY_SCHEDULING
> options ICMP_BANDLIM #Rate limit bad replies
> options KBD_INSTALL_CDEV # install a CDEV entry in
> /dev options AHC_REG_PRETTY_PRINT # Print register
> bitfields in debug
>
> # Firewall support.
> #options IPFILTER
> #options IPFILTER_LOG
> #options IPFILTER_DEFAULT_BLOCK
>
> # To make an SMP kernel, the next two are needed
> options SMP # Symmetric MultiProcessor
> Kernel
> options APIC_IO # Symmetric (APIC) I/O
>
> device isa
> device pci
>
> # Floppy drives
> device fdc0 at isa? port IO_FD1 irq 6 drq 2
> device fd0 at fdc0 drive 0
> device fd1 at fdc0 drive 1
>
> # ATA and ATAPI devices
> device ata
> device atadisk # ATA disk drives
> device atapicd # ATAPI CDROM drives
> device atapifd # ATAPI floppy drives
> device atapist # ATAPI tape drives
> options ATA_STATIC_ID #Static device numbering
>
> # SCSI Controllers
> device ahc # AHA2940 and onboard AIC7xxx devices
>
> # SCSI peripherals
> device scbus # SCSI bus (required)
> device da # Direct Access (disks)
> device sa # Sequential Access (tape etc)
> device pass # Passthrough device (direct SCSI
> access)
>
> # RAID controllers interfaced to the SCSI subsystem
> device ciss # Compaq SmartRAID 5* series
>
> # atkbdc0 controls both the keyboard and the PS/2 mouse
> device atkbdc0 at isa? port IO_KBD
> device atkbd0 at atkbdc? irq 1 flags 0x1
> device psm0 at atkbdc? irq 12
>
> device vga0 at isa?
>
> # syscons is the default console driver, resembling an SCO console
> device sc0 at isa? flags 0x100
>
> # Floating point support - do not disable.
> device npx0 at nexus? port IO_NPX irq 13
>
> # Power management support (see LINT for more options)
> #device apm0 at nexus? disable flags 0x20 # Advanced Power
> Management
>
> # Serial (COM) ports
> device sio0 at isa? port IO_COM1 flags 0x10 irq 4
> device sio1 at isa? port IO_COM2 irq 3
> #device sio2 at isa? disable port IO_COM3 irq 5
> #device sio3 at isa? disable port IO_COM4 irq 9
>
> # Parallel port
> device ppc0 at isa? irq 7
> device ppbus # Parallel port bus (required)
> device lpt # Printer
> device plip # TCP/IP over parallel
> device ppi # Parallel port interface device
>
> # PCI Ethernet NICs that use the common MII bus controller code.
> # NOTE: Be sure to keep the 'device miibus' line in order to use
> these NICs!
> device miibus # MII bus support
> device bge # Broadcom BCM570x (``Tigon III'')
>
> # Pseudo devices - the number indicates how many units to allocate.
> pseudo-device loop # Network loopback
> pseudo-device ether # Ethernet support
> pseudo-device sl 1 # Kernel SLIP
> pseudo-device ppp 1 # Kernel PPP
> pseudo-device tun # Packet tunnel.
> pseudo-device pty # Pseudo-ttys (telnet etc)
> pseudo-device md # Memory "disks"
> pseudo-device gif # IPv6 and IPv4 tunneling
> pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
>
> # The `bpf' pseudo-device enables the Berkeley Packet Filter.
> # Be aware of the administrative consequences of enabling this!
> pseudo-device bpf #Berkeley packet filter
>
> # USB support
> device ohci # OHCI PCI->USB interface
> device usb # USB Bus (required)
> device ugen # Generic
> device uhid # "Human Interface Devices"
> device ukbd # Keyboard
> device ulpt # Printer
> device umass # Disks/Mass storage - Requires scbus
> and da
>
> Thanks,

-- 
Kent Stewart
Richland, WA
http://users.owt.com/kstewart/index.html
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

• Previous message: Peter Schuller: "Re: What OS should I use?"
• In reply to: Nelis Lamprecht: "builworld failure after cvsup on 4.9"
• Next in thread: Nelis Lamprecht: "Re: builworld failure after cvsup on 4.9"
• Reply: Nelis Lamprecht: "Re: builworld failure after cvsup on 4.9"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]