promise sata tx4 and 3 monitors [long]
From: jon (juostaus_at_yahoo.com)
Date: 03/14/04
- Previous message: Corey Mosher: "Gnome and openh323"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Sat, 13 Mar 2004 15:49:35 -0800 (PST) To: freebsd-questions@freebsd.org
I can boot 5.1-RELEASE-p10 and 5.2.1-RELEASE-p1 from
promise raid
without the pci video card (ati xpert 98), when I plug
it in, I no
longer have /dev/ar0. I would like to move to 5.2.1,
so I have
included information from that system (the only way i
can get the
system to boot is from onboard IDE). I have tried 7
different pci
video cards with my Matro g550 and Promise raid, so I
assume its
not this just this card. I have tried the cards in all
possible
slot configurations. PNP OS is off in the BIOS.
Motherboard
http://www.intel.com/support/motherboards/desktop/d865perl/index.htm
Promise card
http://www.promise.com/product/product_detail_eng.asp?productId=108&familyId=2
Thanks in advance.
-- Jon uname -a FreeBSD new52.foo.com 5.2.1-RELEASE-p1 FreeBSD 5.2.1-RELEASE-p1 #0: Thu Mar 11 20:04:08 EST 2004 root@new.foo.com:/usr/obj/usr/521/src/sys/NEW521 i386 diff dmesg.boot.with dmesg.boot.without 24c24 < Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 --- > Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 34c34 < drm0: <Matrox G550 (AGP)> mem 0xfe000000-0xfe7fffff,0xfe8fc000-0xfe8fffff,0xea000000-0xebffffff irq 16 at device 0.0 on pci1 --- > drm0: <Matrox G550 (AGP)> mem 0xfe000000-0xfe7fffff,0xfe8fc000-0xfe8fffff,0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1 39c39 < em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x9c00-0x9c1f mem 0xfe9e0000-0xfe9fffff irq 18 at device 1.0 on pci2 --- > em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xac00-0xac1f mem 0xfe9e0000-0xfe9fffff irq 18 at device 1.0 on pci2 64d63 < pci3: <display, VGA> at device 0.0 (no driver attached) 127a127,134 > GEOM: create disk ad4 dp=0xc6beab60 > ad4: 35304MB <WDC WD360GD-00FNA0> [71730/16/63] at ata2-master UDMA133 > GEOM: create disk ad8 dp=0xc6bea860 > ad8: 35304MB <WDC WD360GD-00FNA0> [71730/16/63] at ata4-master UDMA133 > GEOM: create disk ar0 dp=0xc6bee5e0 > ar0: 70609MB <ATA RAID0 array> [9001/255/63] status: READY subdisks: > disk0 READY on ad4 at ata2-master > disk1 READY on ad8 at ata4-master 129c136 < GEOM: create disk cd1 dp=0xc69c9e00 --- > GEOM: create disk cd1 dp=0xc69c8e00 cat KERNEL # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the ../../conf/NOTES and NOTES files. # If you are in doubt as to the purpose or necessity of a line, check first # in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.394.2.3 2004/01/26 19:42:11 nectar Exp $ machine i386 cpu I686_CPU ident NEW521 #To statically compile in device wiring instead of /boot/device.hints #hints "GENERIC.hints" #Default places to look for devices. #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options SCHED_4BSD #4BSD scheduler options INET #InterNETworking options FFS #Berkeley Fast Filesystem options SOFTUPDATES #Enable FFS soft updates support options UFS_ACL #Support for access control lists options UFS_DIRHASH #Improve performance on big directories options MD_ROOT #MD is a potential root device options NFSCLIENT #Network Filesystem Client options NFSSERVER #Network Filesystem Server options NFS_ROOT #NFS usable as /, requires NFSCLIENT options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem (requires PSEUDOFS) options PSEUDOFS #Pseudo-filesystem framework options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options COMPAT_FREEBSD4 #Compatible with FreeBSD4 options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options _KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions options KBD_INSTALL_CDEV # install a CDEV entry in /dev options AHC_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~128k to driver. options AHD_REG_PRETTY_PRINT # Print register bitfields in debug # output. Adds ~215k to driver. options NTFS #obvious options PFIL_HOOKS # pfil(9) framework # Debugging for use in -current #options DDB #Enable the kernel debugger #options INVARIANTS #Enable calls of extra sanity checking options INVARIANT_SUPPORT #Extra sanity checks of internal structures, required by INVARIANTS #options WITNESS #Enable checks to detect deadlocks and cycles #options WITNESS_SKIPSPIN #Don't run witness on spinlocks for speed # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel device apic # I/O APIC device isa device eisa device pci device acpi # needed to boot w/ MB & proimise device pcm # sound device sbc # sound device mgadrm # video # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device ataraid # ATA RAID drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering device atapicam # needed for scsi emu 4 dvd+rw # SCSI Controllers device ahb # EISA AHA1742 family device ahc # AHA2940 and onboard AIC7xxx devices device ahd # AHA39320/29320 and onboard AIC79xx devices device amd # AMD 53C974 (Tekram DC-390(T)) device isp # Qlogic family device mpt # LSI-Logic MPT-Fusion #device ncr # NCR/Symbios Logic device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') device trm # Tekram DC395U/UW/F DC315U adapters device adv # Advansys SCSI adapters device adw # Advansys wide SCSI adapters device aha # Adaptec 154x SCSI adapters device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. device bt # Buslogic/Mylex MultiMaster SCSI adapters device ncv # NCR 53C500 device nsp # Workbit Ninja SCSI-3 device stg # TMC 18C30/18C50 # SCSI peripherals device scbus # SCSI bus (required for SCSI) device ch # SCSI media changers device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) device ses # SCSI Environmental Services (and SAF-TE) # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc # AT keyboard controller device atkbd # AT keyboard device psm # PS/2 mouse device vga # VGA video card driver device splash # Splash screen and screen saver support # syscons is the default console driver, resembling an SCO console device sc # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor device agp # support several AGP chipsets # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) #device apm # Add suspend/resume support for the i8254. device pmtimer # Serial (COM) ports device sio # 8250, 16[45]50 based serial ports # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # If you've got a "dumb" serial or parallel PCI card that is # supported by the puc(4) glue driver, uncomment the following # line to enable it (connects to the sio and/or ppc drivers): #device puc # PCI Ethernet NICs. device de # DEC/Intel DC21x4x (``Tulip'') device em # Intel PRO/1000 adapter Gigabit Ethernet Card device txp # 3Com 3cR990 (``Typhoon'') device vx # 3Com 3c590, 3c595 (``Vortex'') # PCI Ethernet NICs that use the common MII bus controller code. # NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! device miibus # MII bus support device bfe # Broadcom BCM440x 10/100 ethernet device bge # Broadcom BCM570xx Gigabit Ethernet device dc # DEC/Intel 21143 and various workalikes device fxp # Intel EtherExpress PRO/100B (82557, 82558) device pcn # AMD Am79C97x PCI 10/100 (precedence over 'lnc') device re # RealTek 8139C+/8169/8169S/8110S device rl # RealTek 8129/8139 device sf # Adaptec AIC-6915 (``Starfire'') device sis # Silicon Integrated Systems SiS 900/SiS 7016 device sk # SysKonnect SK-984x and SK-982x gigabit ethernet device ste # Sundance ST201 (D-Link DFE-550TX) device ti # Alteon Networks Tigon I/II gigabit ethernet device tl # Texas Instruments ThunderLAN device tx # SMC EtherPower II (83c170 ``EPIC'') device vr # VIA Rhine, Rhine II device wb # Winbond W89C840F device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. pccard nics included. device cs # Crystal Semiconductor CS89x0 NIC # 'device ed' requires 'device miibus' device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards device ex # Intel EtherExpress Pro/10 and Pro/10+ device ep # Etherlink III based cards device fe # Fujitsu MB8696x based cards device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. device lnc # NE2100, NE32-VL Lance Ethernet cards device sn # SMC's 9000 series of ethernet chips device xe # Xircom pccard ethernet # ISA devices that use the old ISA shims #device le # Wireless NIC cards device wlan # 802.11 support device an # Aironet 4500/4800 802.11 wireless NICs. device awi # BayStack 660 and others device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. #device wl # Older non 802.11 Wavelan wireless NIC. # Pseudo devices - the number indicates how many units to allocate. device random # Entropy device device loop # Network loopback device ether # Ethernet support device sl # Kernel SLIP device ppp # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif # IPv6 and IPv4 tunneling device faith # IPv6-to-IPv4 relaying (translation) # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device urio # Diamond Rio 500 MP3 player device uscanner # Scanners # USB Ethernet, requires mii device aue # ADMtek USB ethernet device axe # ASIX Electronics USB ethernet device cue # CATC USB ethernet device kue # Kawasaki LSI USB ethernet cat dmesg.boot.with Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p1 #0: Thu Mar 11 20:04:08 EST 2004 root@new.foo.com:/usr/obj/usr/521/src/sys/NEW521 Preloaded elf kernel "/boot/kernel/kernel" at 0xc09f7000. ACPI APIC Table: <INTEL D865PERL> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2593.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1072889856 (1023 MB) avail memory = 1032753152 (984 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard Pentium Pro MTRR support enabled acpi0: <INTEL D865PERL> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00f3310 acpi0: Power Button (fixed) Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_cpu1: <CPU> port 0x530-0x537 on acpi0 acpi_cpu1: Failed to attach throttling P_CNT pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 drm0: <Matrox G550 (AGP)> mem 0xfe000000-0xfe7fffff,0xfe8fc000-0xfe8fffff,0xea000000-0xebffffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xf8000000 64MB info: [drm] Initialized mga 3.1.0 20021029 on minor 0 pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci2: <ACPI PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0x9c00-0x9c1f mem 0xfe9e0000-0xfe9fffff irq 18 at device 1.0 on pci2 em0: Speed:N/A Duplex:N/A uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 16 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd800-0xd81f irq 16 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pci3: <display, VGA> at device 0.0 (no driver attached) pcm0: <Creative CT5880-C> port 0xbc00-0xbc3f irq 17 at device 2.0 on pci3 pcm0: <SigmaTel STAC9721/23 AC97 Codec> atapci0: <Promise PDC20319 SATA150 controller> port 0xb000-0xb07f,0xb400-0xb40f,0xb800-0xb83f mem 0xfeac0000-0xfeadffff,0xfeaff000-0xfeafffff irq 19 at device 3.0 on pci3 atapci0: [MPSAFE] ata2: at 0xfeaff000 on atapci0 ata2: [MPSAFE] ata3: at 0xfeaff000 on atapci0 ata3: [MPSAFE] ata4: at 0xfeaff000 on atapci0 ata4: [MPSAFE] ata5: at 0xfeaff000 on atapci0 ata5: [MPSAFE] pci3: <serial bus, FireWire> at device 7.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci1 ata1: [MPSAFE] atapci2: <Intel ICH5 SATA150 controller> port 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq 18 at device 31.2 on pci0 atapci2: [MPSAFE] ata6: at 0xec00 on atapci2 ata6: [MPSAFE] ata7: at 0xe400 on atapci2 ata7: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROM> at iomem 0xc0000-0xc8fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acd0: DVDR <PIONEER DVD-RW DVR-106D> at ata0-master PIO4 GEOM: create disk ad2 dp=0xc6beae60 ad2: 29311MB <Maxtor 53073U6> [59554/16/63] at ata1-master UDMA66 acd1: DVDROM <TOSHIBA DVD-ROM SD-M1402> at ata1-slave PIO4 GEOM: create disk cd0 dp=0xc69c9600 GEOM: create disk cd1 dp=0xc69c9e00 SMP: AP CPU #1 Launched! cd1 at ata1 bus 0 target 1 lun 0 cd1: <TOSHIBA DVD-ROM SD-M1402 1010> Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present cd0 at ata0 bus 0 target 0 lun 0 cd0: <PIONEER DVD-RW DVR-106D 1.07> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ad2s1a cat dmesg.boot.without Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.2.1-RELEASE-p1 #0: Thu Mar 11 20:04:08 EST 2004 root@new.foo.com:/usr/obj/usr/521/src/sys/NEW521 Preloaded elf kernel "/boot/kernel/kernel" at 0xc09f7000. ACPI APIC Table: <INTEL D865PERL> Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) 4 CPU 2.60GHz (2593.51-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf29 Stepping = 9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Hyperthreading: 2 logical CPUs real memory = 1072889856 (1023 MB) avail memory = 1032753152 (984 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0 <Version 2.0> irqs 0-23 on motherboard Pentium Pro MTRR support enabled acpi0: <INTEL D865PERL> on motherboard pcibios: BIOS version 2.10 Using $PIR table, 12 entries at 0xc00f3310 acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 acpi_cpu0: <CPU> port 0x530-0x537 on acpi0 acpi_cpu1: <CPU> port 0x530-0x537 on acpi0 acpi_cpu1: Failed to attach throttling P_CNT pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 agp0: <Intel 82865 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 drm0: <Matrox G550 (AGP)> mem 0xfe000000-0xfe7fffff,0xfe8fc000-0xfe8fffff,0xf2000000-0xf3ffffff irq 16 at device 0.0 on pci1 info: [drm] AGP at 0xf8000000 64MB info: [drm] Initialized mga 3.1.0 20021029 on minor 0 pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0 pci2: <ACPI PCI bus> on pcib2 em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.19> port 0xac00-0xac1f mem 0xfe9e0000-0xfe9fffff irq 18 at device 1.0 on pci2 em0: Speed:N/A Duplex:N/A uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xcc00-0xcc1f irq 16 at device 29.0 on pci0 usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xd000-0xd01f irq 19 at device 29.1 on pci0 usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd400-0xd41f irq 18 at device 29.2 on pci0 usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd800-0xd81f irq 16 at device 29.3 on pci0 usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib3 pcm0: <Creative CT5880-C> port 0xbc00-0xbc3f irq 17 at device 2.0 on pci3 pcm0: <SigmaTel STAC9721/23 AC97 Codec> atapci0: <Promise PDC20319 SATA150 controller> port 0xb000-0xb07f,0xb400-0xb40f,0xb800-0xb83f mem 0xfeac0000-0xfeadffff,0xfeaff000-0xfeafffff irq 19 at device 3.0 on pci3 atapci0: [MPSAFE] ata2: at 0xfeaff000 on atapci0 ata2: [MPSAFE] ata3: at 0xfeaff000 on atapci0 ata3: [MPSAFE] ata4: at 0xfeaff000 on atapci0 ata4: [MPSAFE] ata5: at 0xfeaff000 on atapci0 ata5: [MPSAFE] pci3: <serial bus, FireWire> at device 7.0 (no driver attached) isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH5 UDMA100 controller> port 0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata0: [MPSAFE] ata1: at 0x170 irq 15 on atapci1 ata1: [MPSAFE] atapci2: <Intel ICH5 SATA150 controller> port 0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq 18 at device 31.2 on pci0 atapci2: [MPSAFE] ata6: at 0xec00 on atapci2 ata6: [MPSAFE] ata7: at 0xe400 on atapci2 ata7: [MPSAFE] pci0: <serial bus, SMBus> at device 31.3 (no driver attached) acpi_button0: <Sleep Button> on acpi0 atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3,0x3f0-0x3f1 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A ppc0 port 0x378-0x37f irq 7 on acpi0 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 npx0: [FAST] npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROM> at iomem 0xc0000-0xc8fff on isa0 pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Timecounters tick every 10.000 msec acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0% acd0: DVDR <PIONEER DVD-RW DVR-106D> at ata0-master PIO4 GEOM: create disk ad2 dp=0xc6beae60 ad2: 29311MB <Maxtor 53073U6> [59554/16/63] at ata1-master UDMA66 acd1: DVDROM <TOSHIBA DVD-ROM SD-M1402> at ata1-slave PIO4 GEOM: create disk ad4 dp=0xc6beab60 ad4: 35304MB <WDC WD360GD-00FNA0> [71730/16/63] at ata2-master UDMA133 GEOM: create disk ad8 dp=0xc6bea860 ad8: 35304MB <WDC WD360GD-00FNA0> [71730/16/63] at ata4-master UDMA133 GEOM: create disk ar0 dp=0xc6bee5e0 ar0: 70609MB <ATA RAID0 array> [9001/255/63] status: READY subdisks: disk0 READY on ad4 at ata2-master disk1 READY on ad8 at ata4-master GEOM: create disk cd0 dp=0xc69c9600 GEOM: create disk cd1 dp=0xc69c8e00 SMP: AP CPU #1 Launched! cd1 at ata1 bus 0 target 1 lun 0 cd1: <TOSHIBA DVD-ROM SD-M1402 1010> Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: Attempt to query device size failed: NOT READY, Medium not present cd0 at ata0 bus 0 target 0 lun 0 cd0: <PIONEER DVD-RW DVR-106D 1.07> Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present Mounting root from ufs:/dev/ad2s1a __________________________________ Do you Yahoo!? Yahoo! Mail - More reliable, more storage, less spam http://mail.yahoo.com _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
- Previous message: Corey Mosher: "Gnome and openh323"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
