compiling kernel :(
From: Brian G. (madcow413_at_msn.com)
Date: 03/31/04
- Previous message: Tim Hawkins: "lang/mono"
- Next in thread: Don: "Re: compiling kernel :("
- Reply: Don: "Re: compiling kernel :("
- Reply: Martin Welk: "Re: compiling kernel :("
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
To: freebsd-questions@freebsd.org Date: Tue, 30 Mar 2004 19:30:22 -0500
hello
im pretty new to freebsd
got it about two weeks ago
now i've been trying to get kazaa on my box so i have installed wine, but
whenever i try to run it i get an error and a question wheter i have added
USER_LDT option to my kernel
which brings me to my current problem
whenever i attempt to compile my kernel i get this after a while :
umass.o:/usr/src/sys/dev/usb/umass.c:2683: more undefined references to
`xpt_done' follow
if_aue.o: In function `aue_attach':
/usr/src/sys/dev/usb/if_aue.c:769: undefined reference to `mii_phy_probe'
if_aue.o: In function `aue_tick':
/usr/src/sys/dev/usb/if_aue.c:1116: undefined reference to `mii_tick'
/usr/src/sys/dev/usb/if_aue.c:1118: undefined reference to `mii_pollstat'
if_aue.o: In function `aue_init':
/usr/src/sys/dev/usb/if_aue.c:1277: undefined reference to `mii_mediachg'
if_aue.o: In function `aue_ifmedia_upd':
/usr/src/sys/dev/usb/if_aue.c:1342: undefined reference to `mii_phy_reset'
/usr/src/sys/dev/usb/if_aue.c:1347: undefined reference to `mii_mediachg'
if_aue.o: In function `aue_ifmedia_sts':
/usr/src/sys/dev/usb/if_aue.c:1363: undefined reference to `mii_pollstat'
if_aue.o: In function `csr_write_1':
/usr/src/sys/dev/usb/if_aue.c:316: undefined reference to
`miibus_readreg_desc'
/usr/src/sys/dev/usb/if_aue.c:316: undefined reference to
`miibus_writereg_desc'
/usr/src/sys/dev/usb/if_aue.c:318: undefined reference to
`miibus_statchg_desc'
if_aue.o: In function `csr_write_2':
/usr/src/sys/dev/usb/if_aue.c:342: undefined reference to `miibus_driver'
/usr/src/sys/dev/usb/if_aue.c:344: undefined reference to `miibus_devclass'
if_ed.o: In function `ed_tick':
/usr/src/sys/dev/ed/if_ed.c:1749: undefined reference to `mii_tick'
if_ed.o: In function `ed_init':
/usr/src/sys/dev/ed/if_ed.c:1899: undefined reference to `mii_mediachg'
if_ed.o: In function `ed_ifmedia_upd':
/usr/src/sys/dev/ed/if_ed.c:3286: undefined reference to `mii_mediachg'
if_ed.o: In function `ed_ifmedia_sts':
/usr/src/sys/dev/ed/if_ed.c:3302: undefined reference to `mii_pollstat'
if_ed_pccard.o: In function `ed_pccard_attach':
/usr/src/sys/dev/ed/if_ed_pccard.c:248: undefined reference to
`mii_phy_probe'
if_ed_pccard.o: In function `ed_pccard_detach':
/usr/src/sys/dev/ed/if_ed_pccard.c:125: undefined reference to
`miibus_readreg_desc'
/usr/src/sys/dev/ed/if_ed_pccard.c:127: undefined reference to
`miibus_writereg_desc'
if_ed_pccard.o: In function `ed_pccard_probe':
/usr/src/sys/dev/ed/if_ed_pccard.c:147: undefined reference to
`miibus_driver'
/usr/src/sys/dev/ed/if_ed_pccard.c:156: undefined reference to
`miibus_devclass'
*** Error code 1
Stop in /usr/obj/usr/src/sys/MYKERNEL.
*** Error code 1
Stop in /usr/src.
*** Error code 1
i have no idea what it could be
here is my kernel config file (locared at /usr/src/sys/i386/conf/):
#
# GENERIC -- Generic kernel configuration file for FreeBSD/i386
#
# For more information on this file, please read the handbook section on
# Kernel Configuration Files:
#
#
http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ./LINT configuration file. If you are
# in doubt as to the purpose or necessity of a line, check first in LINT.
#
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.54 2003/04/28 03:41:46
simokawa Exp $
machine i386
cpu I686_CPU
ident MYKERN
maxusers 64
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options SOFTUPDATES #Enable FFS soft updates support
#options UFS_DIRHASH #Improve performance on big directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
#options NFS #Network Filesystem
#options NFS_ROOT #NFS usable as root device, NFS required
#options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660 required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
#options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
options AHC_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register bitfields in debug
# output. Adds ~215k to driver.
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# To support HyperThreading, HTT is needed in addition to SMP and APIC_IO
#options HTT # HyperThreading Technology
device isa
device eisa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data PCMCIA floppy,
# don't use the above line for fdc0 but the following one:
#device fdc0
# ATA and ATAPI devices
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
#device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa? flags 0x100
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT
lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
device agp # support several AGP chipsets
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced Power Management
# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000 disable
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')
# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device vr # VIA Rhine, Rhine II
# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device ed0 at isa? disable port 0x280 irq 10 iomem 0xd8000
device ex
device ep
device fe0 at isa? disable port 0x300
# The probe order of these is presently determined by i386/isa/isa_compat.c.
device ie0 at isa? disable port 0x300 irq 10 iomem 0xd0000
#device le0 at isa? disable port 0x300 irq 5 iomem 0xd0000
device lnc0 at isa? disable port 0x280 irq 10 drq 0
device cs0 at isa? disable port 0x300
device sn0 at isa? disable port 0x300 irq 10
# Pseudo devices - the number indicates how many units to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device uscanner # Scanners
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet
#Multimedia
options USER_LDT
any help is greatly appreciated
thanks
`brian
_________________________________________________________________
All the action. All the drama. Get NCAA hoops coverage at MSN Sports by
ESPN. http://msn.espn.go.com/index.html?partnersite=espn
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
- Previous message: Tim Hawkins: "lang/mono"
- Next in thread: Don: "Re: compiling kernel :("
- Reply: Don: "Re: compiling kernel :("
- Reply: Martin Welk: "Re: compiling kernel :("
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
