Re: re: Installing Free BSD 5.21

From: Mr Bluez (mrbluez2u_at_earthlink.net)
Date: 05/02/04

  • Next message: Markie: "Fw: make release broken?"
    Date: Sun, 2 May 2004 09:21:21 -0700
    To: freebsd-questions@freebsd.org
    
    

    I'm somewhat skeptical re: the advice because the CD Rom has booted &
    read the information contained on the CD up to the point of the hang
    (i.e. "time counters tick every 10.000 msecs). I don't perceive the
    failure to lie with the CD Rom but rather somewhere in the BIOS because
    the next step in the loading process has been reported to me as looking
    to the BIOS. Hence I reset the BIOS to defaults. I did however burn
    a new CD in the chance that for some reason the CD had become
    corrupted. That yielded the same result.

    So, my question still stands (unfortunately). Why is the install
    hanging at "time counters tick every 10.000 msecs"|?

    Thanks, :o)

    On Apr 29, 2004, at 10:57 AM, freebsd-questions-request@freebsd.org
    wrote:

    > Send freebsd-questions mailing list submissions to
    > freebsd-questions@freebsd.org
    >
    > To subscribe or unsubscribe via the World Wide Web, visit
    > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    > or, via email, send a message with subject or body 'help' to
    > freebsd-questions-request@freebsd.org
    >
    > You can reach the person managing the list at
    > freebsd-questions-owner@freebsd.org
    >
    > When replying, please edit your Subject line so it is more specific
    > than "Re: Contents of freebsd-questions digest..."
    >
    >
    > Today's Topics:
    >
    > 1. help (Dawn Cimini)
    > 2. RE: Permissions and other questions.. (Richard Bradley)
    > 3. Re: help (Bill Moran)
    > 4. USB multi-card reader problems (Frank Altpeter)
    > 5. Re: USB multi-card reader problems (Richard Tobin)
    > 6. Re: USB multi-card reader problems (Andrew L. Gould)
    > 7. pad ip address with leading zeros in perl script (JJB)
    > 8. Re: More ProFTP (Paul Mather)
    > 9. nvidia and dmesg (bryan cassidy)
    > 10. Re: Creating a zip file (David Landgren)
    > 11. Re: USB multi-card reader problems (Frank Altpeter)
    > 12. Re: Suexec with Apache 1.3.29 (Peter Risdon)
    > 13. usb probs ehci works vs uhci hangs with Linksys usb200M (
    > axe0 ) (mark)
    > 14. Re: Suexec with Apache 1.3.29 (Mikkel Christensen)
    > 15. Re: Suexec with Apache 1.3.29 (Marty Landman)
    > 16. Re: Suexec with Apache 1.3.29 (Dick Davies)
    > 17. OpenLdap question - solved (Darryl Hoar)
    > 18. How do you keep track of what's been merged in CVS? (Doug Lee)
    > 19. Help... (Carlos Castro)
    > 20. Re: nvidia and dmesg (peter lageotakes)
    > 21. failed php4 install...can't figure this one out (Jason Williams)
    > 22. Dumb question (Jay Chen)
    > 23. Installing Free BSD 5.2.1 (MrBluez2U)
    > 24. Weird messages in daily run report. (samy lancher)
    > 25. Re: Help... (Ion-Mihai Tetcu)
    > 26. Re: Weird messages in daily run report. (Bill Moran)
    > 27. Re: Installing Free BSD 5.2.1 (Mikkel Christensen)
    > 28. Re: Dumb question (Bill Moran)
    > 29. Re: Suexec with Apache 1.3.29 (Mikkel Christensen)
    > 30. Re: failed php4 install...can't figure this one out
    > (Mikkel Christensen)
    > 31. Re: failed php4 install...can't figure this one out (Peter
    > Risdon)
    > 32. Re: failed php4 install...can't figure this one out
    > (Ion-Mihai Tetcu)
    > 33. Re: failed php4 install...can't figure this one out
    > (Mikkel Christensen)
    > 34. Re: failed php4 install...can't figure this one out
    > (Ion-Mihai Tetcu)
    > 35. Re: failed php4 install...can't figure this one out
    > (Ion-Mihai Tetcu)
    > 36. Re: failed php4 install...can't figure this one out
    > (Ion-Mihai Tetcu)
    >
    >
    > ----------------------------------------------------------------------
    >
    > Message: 1
    > Date: Wed, 28 Apr 2004 12:16:42 -0700
    > From: "Dawn Cimini" <dawnsmc@hotmail.com>
    > Subject: help
    > To: freebsd-questions@FreeBSD.org
    > Message-ID: <BAY18-F43goNrRJBJ1q0001c4ea@hotmail.com>
    > Content-Type: text/plain; format=flowed
    >
    > I don't know where I got the program that uses "Orion2.0", but it is
    > on my
    > computer ..I should say it may have been. When I try to install some
    > other
    > programs ( not from your company) they ask for the file "Orion2.0.msi"
    > I
    > don't have that file ..maybe it's a program I don't know, but I know
    > there
    > isn't one on my computer. I have checked the entire sys ..nothing is
    > there.
    >
    > Now , I can't say for sure that my son didn't download your program
    > and then
    > tried to delete it, but if that is the case how to I get my programs
    > to run
    > without asking for that Orion2 file.
    >
    > Any help would be appreciated,
    >
    > ThankYou,
    > DawnSMC
    >
    > _________________________________________________________________
    > Is your PC infected? Get a FREE online computer virus scan from McAfee®
    > Security. http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
    >
    >
    > ------------------------------
    >
    > Message: 2
    > Date: Thu, 29 Apr 2004 13:33:11 +0100
    > From: Richard Bradley <rtb27@cam.ac.uk>
    > Subject: RE: Permissions and other questions..
    > To: killermink@hotmail.com
    > Cc: freebsd-questions@freebsd.org
    > Message-ID: <200404291333.11890.rtb27@cam.ac.uk>
    > Content-Type: text/plain; charset="iso-8859-1"
    >
    >> These may be immensly stupid questions, but here goes anyway, I have
    >> put
    >> them all into one mail as I don't think they singularily deserve a
    >> whole
    >> mail...
    >
    > I don't know about stupid - these are quite sensible questions. Lazy
    > perhaps
    > -- most of these can be answered by google (or by experimentation).
    >
    >> 1) Is it desirable and how do you enable certain processes to be run
    >> in a
    >> user account?
    >
    > You can use `su` as root - in fact you can su into any account without
    > using a
    > password, such is the power of root ;-)
    >
    >> Here is why, I am the only user of my machine and while I realise the
    >> importance of root, if i want to mount a cd I always have to su.
    >>  This is
    >> the same for other processes such as ifconfig.  As the only user I
    >> don't
    >> want to have to su all the time to do simple things, and as not being
    >> used
    >> to it, I sometimes forget I have done so and do things undesirable
    >> (e.,g.
    >> startx as root).
    >
    > How often do you need to run ifconfig? If you manage to get automount
    > working
    > (see below) you should have no excuse not to run as a normal user
    >
    >> 2) Is there a way to automount?  Like when I put in a CD or attach my
    >> USB
    >> drive.. as they have the same command each time.
    >
    > umm - I'm not going to answer this one. The simple answer is that the
    > very
    > first result for a google search on "automount freebsd" gives a
    > detailed
    > tutorial on how to set this up on a FreeBSD box. Searching is quicker
    > than
    > waiting for email replies, you know.
    >
    >> 3) Is it possible to have the command prompt tell you what directory
    >> you are
    >> in before the symbol?
    >
    > Again, the first result on google for "change prompt string csh" is a
    > long
    > tutorial on changing the title bar of xterms or something. Anyway, I
    > skimmed
    > through it and to get you started, at your console, type:
    >
    > alias precmd 'echo -n "$cwd"'
    >
    > You should be able to customise this to suit your own needs.
    >
    >> 4) Is there a way in XFCE to create a launcher for OpenOffice?  I
    >> understand
    >> it needs to be run with ./soffice but this doesn't work even tho I
    >> have
    >> added the directory to my PATH
    >
    > I don't even know what XFCE is, so try Google for this one, or wait for
    > someone on the mailing list to try Google for you ;-)
    >
    >> Thanks for the advice...
    >
    > Have fun!
    >
    >
    > Rich
    >
    >
    > ------------------------------
    >
    > Message: 3
    > Date: Thu, 29 Apr 2004 08:32:40 -0400
    > From: Bill Moran <wmoran@potentialtech.com>
    > Subject: Re: help
    > To: Dawn Cimini <dawnsmc@hotmail.com>
    > Cc: freebsd-questions@FreeBSD.org
    > Message-ID: <4090F5E8.50009@potentialtech.com>
    > Content-Type: text/plain; charset=us-ascii; format=flowed
    >
    > Dawn Cimini wrote:
    >> I don't know where I got the program that uses "Orion2.0", but it is
    >> on
    >> my computer ..I should say it may have been. When I try to install
    >> some
    >> other programs ( not from your company) they ask for the file
    >> "Orion2.0.msi" I don't have that file ..maybe it's a program I don't
    >> know, but I know there isn't one on my computer. I have checked the
    >> entire sys ..nothing is there.
    >>
    >> Now , I can't say for sure that my son didn't download your program
    >> and
    >> then tried to delete it, but if that is the case how to I get my
    >> programs to run without asking for that Orion2 file.
    >
    > I'm not 100% sure I understand your questions, but I'll try to help as
    > best I can.
    >
    > First off, FreeBSD is an operating system. I don't know what
    > Orion2.0.msi
    > is, but .msi files are Microsoft installer files. The fact that you're
    > looking for a .msi file almost definately means that you're NOT running
    > FreeBSD. I would suspect that you simply have the wrong mailing list.
    >
    > If you are running FreeBSD, please provide details on the version
    > of FreeBSD, what software you're trying to install and exactly what
    > error messages you're getting and I'm sure someone will be able to
    > help you out.
    >
    > --
    > Bill Moran
    > Potential Technologies
    > http://www.potentialtech.com
    >
    > ------------------------------
    >
    > Message: 4
    > Date: Thu, 29 Apr 2004 14:47:48 +0200
    > From: Frank Altpeter <frank@altpeter.de>
    > Subject: USB multi-card reader problems
    > To: questions@freebsd.org
    > Message-ID: <20040429124748.GA44778@murphy.planlos.de>
    > Content-Type: text/plain; charset=us-ascii
    >
    >
    > [Compaq Armada E500 with 4.10-PRERELEASE running]
    >
    >
    > Hi folks,
    >
    > I just got an USB-2.0 based multi-card reader, which enables me to
    > read CompactFlash, SDIO, MemoryStick and some other less important
    > card types.
    >
    > But... it doesn't work and i'm a little bit confused.
    >
    > When plugging in (with a CompactFlash card inserted), the message
    > log tells me:
    >
    > Apr 29 14:38:34 pegasus /kernel: umass0: Ltd Winter Ver1.3, rev
    > 2.00/0.05, addr 2, SCSI over Bulk-Only
    > Apr 29 14:38:34 pegasus /kernel: umass0:2:0:-1: Attached to scbus2
    > as device 0
    >
    > So, it looks like there is generally no problem in accessing this
    > device. But i'm missing a device entry to mount.
    >
    > The camcontrol command also doesn't list anything useful:
    >
    > scbus2 on umass-sim0 bus 0:
    > <USB2.0 CardReader CF RW 0.0>> at scbus2 target 0 lun 0 (probe0)
    > < > at scbus2 target -1 lun -1 ()
    >
    >
    > So, any hints how to access the inserted media devices? I used to
    > use a PCMCIA card for CompactFlash before, quite successfully, but i
    > need a multi-card reader now and the ones for PC-CARD slot are quite
    > rare or don't provide all the needed card slots...
    >
    >
    > With kind regards,
    >
    > Frank Altpeter
    >
    > ------------------------------
    >
    > Message: 5
    > Date: Thu, 29 Apr 2004 14:06:18 +0100 (BST)
    > From: Richard Tobin <richard@inf.ed.ac.uk>
    > Subject: Re: USB multi-card reader problems
    > To: Frank Altpeter <frank@altpeter.de>, questions@freebsd.org
    > Message-ID: <20040429130618.06A37B8A7A@macintosh.inf.ed.ac.uk>
    >
    >> So, it looks like there is generally no problem in accessing this
    >> device. But i'm missing a device entry to mount.
    >>
    >> The camcontrol command also doesn't list anything useful:
    >>
    >> scbus2 on umass-sim0 bus 0:
    >> <USB2.0 CardReader CF RW 0.0>> at scbus2 target 0 lun 0 (probe0)
    >> < > at scbus2 target -1 lun -1 ()
    >
    > Try rescanning the device corresponding to each LUN, e.g.
    >
    > camcontrol rescan 2:0:1
    >
    > (the various kinds of card probably appear as different LUNs).
    >
    > -- Richard
    >
    > ------------------------------
    >
    > Message: 6
    > Date: Thu, 29 Apr 2004 08:12:35 -0500
    > From: "Andrew L. Gould" <algould@datawok.com>
    > Subject: Re: USB multi-card reader problems
    > To: Frank Altpeter <frank@altpeter.de>
    > Cc: questions@freebsd.org
    > Message-ID: <20040429081235.63eedb77.algould@datawok.com>
    > Content-Type: text/plain; charset=US-ASCII
    >
    > On Thu, 29 Apr 2004 14:47:48 +0200
    > Frank Altpeter <frank@altpeter.de> wrote:
    >>
    >> [Compaq Armada E500 with 4.10-PRERELEASE running]
    >>
    >>
    >> Hi folks,
    >>
    >> I just got an USB-2.0 based multi-card reader, which enables me to
    >> read CompactFlash, SDIO, MemoryStick and some other less important
    >> card types.
    >>
    >> But... it doesn't work and i'm a little bit confused.
    >>
    >> When plugging in (with a CompactFlash card inserted), the message
    >> log tells me:
    >>
    >> Apr 29 14:38:34 pegasus /kernel: umass0: Ltd Winter Ver1.3, rev
    >> 2.00/0.05, addr 2, SCSI over Bulk-Only
    >> Apr 29 14:38:34 pegasus /kernel: umass0:2:0:-1: Attached to scbus2
    >> as device 0
    >>
    >> So, it looks like there is generally no problem in accessing this
    >> device. But i'm missing a device entry to mount.
    >>
    >> The camcontrol command also doesn't list anything useful:
    >>
    >> scbus2 on umass-sim0 bus 0:
    >> <USB2.0 CardReader CF RW 0.0>> at scbus2 target 0 lun 0 (probe0)
    >> < > at scbus2 target -1 lun -1 ()
    >>
    >>
    >> So, any hints how to access the inserted media devices? I used to
    >> use a PCMCIA card for CompactFlash before, quite successfully, but i
    >> need a multi-card reader now and the ones for PC-CARD slot are quite
    >> rare or don't provide all the needed card slots...
    >>
    >>
    >> With kind regards,
    >>
    >> Frank Altpeter
    >
    >
    > Try using dmesg to find list your scsi devices:
    >
    > dmesg | grep da
    >
    > Best of luck,
    >
    > Andrew Gould
    >
    > ------------------------------
    >
    > Message: 7
    > Date: Thu, 29 Apr 2004 09:08:05 -0400
    > From: "JJB" <Barbish3@adelphia.net>
    > Subject: pad ip address with leading zeros in perl script
    > To: "freebsd-questions@FreeBSD. ORG" <freebsd-questions@FreeBSD.ORG>
    > Message-ID: <MIEPLLIBMLEEABPDBIEGAEAOFNAA.Barbish3@adelphia.net>
    > Content-Type: text/plain; charset="iso-8859-1"
    >
    > I have perl script written be someone else and I need to fill in the
    > each octal with leading zero if needed, so ip address can be sorted
    > on.
    >
    > This must be an very common requirement.
    >
    > Is there some standard perl module I can use to perform this task?
    > An sample of the perl code to accomplish this would be very helpful.
    > The ip address is already in $src_ip
    >
    > Thanks
    >
    >
    >
    >
    > ------------------------------
    >
    > Message: 8
    > Date: Thu, 29 Apr 2004 09:19:09 -0400
    > From: Paul Mather <paul@gromit.dlib.vt.edu>
    > Subject: Re: More ProFTP
    > To: freebsd-questions@freebsd.org
    > Cc: suplizio@blarg.net
    > Message-ID: <20040429131909.GB93120@gromit.dlib.vt.edu>
    > Content-Type: text/plain; charset=iso-8859-1
    >
    > On Wed, 28 Apr 2004 21:20:20 -0700, "Jason Suplizio"
    > <suplizio@blarg.net> wrote:
    >
    > => Thanks for the response Sergey, but I only tried to start it when
    > the
    > => service didn't start as configured in inetd.
    >
    > ProFTPD won't appear to be running (i.e., it won't appear in a ps
    > listing) when run from inetd. The proftpd daemon will only be run
    > when an FTP connection is made (and it will then appear in a ps
    > listing).
    >
    > => So, I couldn't get it to run in standalone (with the entry
    > #commented out in
    > => inetd) and on other attempts couldn't get it to start as an inetd
    > service,
    >
    > Did you remember to get inetd to reload its configuration file via
    > sending it a HUP signal when flipping between trying running proftpd
    > in standalone vs. inetd modes?
    >
    > => I spent a good 10 hours on this, finally deinstalled and now i'm
    > trying to
    > => use ncftpd. Wish me luck, I'm reading about ephemeral ports....
    >
    > If you are wanting to provide FTP access for three system accounts,
    > why don't you just use the stock ftpd that comes with FreeBSD? Is
    > there something you need that it doesn't provide? Also, as you say
    > that ssh works, have you considered having the three people use scp or
    > sftp for transferring data?
    >
    > Cheers,
    >
    > Paul.
    >
    > e-mail: paul@gromit.dlib.vt.edu
    >
    > "Without music to decorate it, time is just a bunch of boring
    > production
    > deadlines or dates by which bills must be paid."
    > --- Frank Vincent Zappa
    >
    > ------------------------------
    >
    > Message: 9
    > Date: Thu, 29 Apr 2004 06:21:10 -0700 (PDT)
    > From: bryan cassidy <linux_kinda_guy@yahoo.com>
    > Subject: nvidia and dmesg
    > To: freebsd-questions@freebsd.org
    > Message-ID: <20040429132110.95065.qmail@web21503.mail.yahoo.com>
    > Content-Type: text/plain; charset=us-ascii
    >
    > running freebsd 4.9 p-5 and have installed the
    > x11/nvidia-drivers port. Works fine but in 'dmesg' I
    > have
    >
    > nvidia: agp_find_device failed, chipset unsupported?
    >
    > here is what I have in /boot/loader.conf
    >
    > # -- sysinstall generated deltas -- #
    > agp_load="YES"
    > userconfig_script_load="YES"
    > linux_load="YES"
    > nvidia_load="YES"
    > snd_emu10k1_load="YES"
    >
    > Please Cc: me because I am not subscribed to the list.
    >
    >
    >
    >
    > __________________________________
    > Do you Yahoo!?
    > Win a $20,000 Career Makeover at Yahoo! HotJobs
    > http://hotjobs.sweepstakes.yahoo.com/careermakeover
    >
    > ------------------------------
    >
    > Message: 10
    > Date: Thu, 29 Apr 2004 15:31:28 +0200
    > From: David Landgren <david@landgren.net>
    > Subject: Re: Creating a zip file
    > To: freebsd-questions@freebsd.org
    > Message-ID: <409103B0.7070400@landgren.net>
    > Content-Type: text/plain; charset=us-ascii; format=flowed
    >
    > Shantanoo wrote:
    >
    >> +++ Bryan Cassidy [freebsd] [28-04-04 00:39 -0500]:
    >> | I am trying to create a zip file that can be unziped on a Windows
    >> machine. Any help appreciated.
    >> | --
    >>
    >> .tar, .tar.gz, .tgz are supported by WinZIP.
    >
    > Careful with tarfiles and winzip. Earlier version of the latter did bad
    > things when tar files contained zero-length files. I just checked with
    > version 8.1 and it works correctly, but I do remember having grief in
    > the past with this.
    >
    > David
    >
    >> |
    >> | As Will Rogers would have said, "There is no such things as a free
    >> | variable."
    >> |
    >> | ------------------------------
    >> _______________________________________________
    >> freebsd-questions@freebsd.org mailing list
    >> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    >> To unsubscribe, send any mail to
    >> "freebsd-questions-unsubscribe@freebsd.org"
    >>
    >
    >
    > --
    > Commercial OS breeds commerce, whereas free OS breeds freedom,
    > the only thing more dangerous and confusing than commerce.
    > -- Michael R. Jinks, redhat-list, circa 1997
    >
    > ------------------------------
    >
    > Message: 11
    > Date: Thu, 29 Apr 2004 15:31:03 +0200
    > From: Frank Altpeter <frank@altpeter.de>
    > Subject: Re: USB multi-card reader problems
    > To: questions@freebsd.org
    > Message-ID: <20040429133103.GA49176@murphy.planlos.de>
    > Content-Type: text/plain; charset=us-ascii
    >
    >
    > Hello!
    >
    > Richard Tobin wrote on 2004-04-29 14:06:18 +0100:
    >> Try rescanning the device corresponding to each LUN, e.g.
    >>
    >> camcontrol rescan 2:0:1
    >>
    >> (the various kinds of card probably appear as different LUNs).
    >
    > I cannot rescan bus 2:0:{1,2,3,4} since camcontrol does hangup itself
    > on
    > trying ...
    >
    > Andrew L. Gould wrote on 2004-04-29 08:12:35 -0500:
    >> Try using dmesg to find list your scsi devices:
    >>
    >> dmesg | grep da
    > Of course i monitored the messages log - there is no da entry on my
    > system...
    >
    >
    > With kind regards,
    >
    > Frank Altpeter
    >
    > ------------------------------
    >
    > Message: 12
    > Date: Thu, 29 Apr 2004 14:57:42 +0100
    > From: Peter Risdon <peter@circlesquared.com>
    > Subject: Re: Suexec with Apache 1.3.29
    > To: Mikkel Christensen <mikkel@talkactive.net>
    > Cc: freebsd-questions@freebsd.org
    > Message-ID: <409109D6.2090504@circlesquared.com>
    > Content-Type: text/plain; charset=us-ascii; format=flowed
    >
    > Mikkel Christensen wrote:
    >
    >> On Thursday 29 April 2004 07:37, you wrote:
    >>
    >>
    >
    >>> ...
    >>>
    >>> If you want to enable the suEXEC mechanism for the first time and an
    >>> Apache server is already running you must kill and restart Apache.
    >>> Restarting it with a simple HUP or USR1 signal will not be enough.
    >>>
    >>> ...
    >>>
    >>>
    >> Now i tried killing apache using "killall -9 httpd" and the start it
    >> again with "apachectl start".
    >> Now for the first time "[notice] suEXEC mechanism enabled (wrapper:
    >> //path/to/suexec/)" is printet to the error log.
    >>
    >> But this leads to another problem. When executing the hellow-world
    >> script under another username execution is refused.
    >> The error "Premature end of script headers:" is printed to the
    >> error-log.
    >> This error doen't show if I run the script as the www-user.
    >> Do you have any idea of what is wrong?
    >>
    >>
    >
    > That sounds promising, suexec is now functioning. Although it's
    > annoyingly vague, that's a common error from perl cgi scripts.
    >
    > It sounds permissions-related. Try running the script on the command
    > line as the user you want the apache host to run as, and see whether it
    > gives a more meaningful error. My first thought is that the suexec user
    > doesn't have execute permissions on the script, or on the directory
    > that
    > contains it.
    >
    > PWR.
    >
    >
    >
    >
    > ------------------------------
    >
    > Message: 13
    > Date: Thu, 29 Apr 2004 14:04:54 +0000 (GMT)
    > From: mark <mark@node.to>
    > Subject: usb probs ehci works vs uhci hangs with Linksys usb200M (
    > axe0 )
    > To: questions@freebsd.org
    > Message-ID: <20040429135424.A69961@mister.mcgoonet.com>
    > Content-Type: TEXT/PLAIN; charset=US-ASCII
    >
    >
    > I'm looking for a work around to this usb ethernet problem.
    >
    > With FreeBSD-5.2.1-p5, "device ehci" added to the default GENERIC
    > kernel,
    > the axe device works fine in USB 2.0 mode, when plugged in after boot.
    >
    > However, without ehci, uhci tries to attach the device and hangs with
    > "read PHY failed". If booted with device plugged, boot stops. If
    > device is
    > plugged in after boot, the axe module hangs, looping forever on the
    > read
    > error (you can unplug the device but usb never deregisters it) but the
    > system remains useable.
    >
    > If the system has ehci enabled, and is booted with the device plugged
    > in,
    > it hangs when uhci module is loaded because it begins immediate probe
    > before ehci is loaded. Thus it is impossible to boot the system in any
    > config with the device plugged in at boot.
    >
    > Is there any way to disable USB autoprobing, to send a signal or
    > something
    > to tell it when to start probing. Alternatively, is there a way to
    > prevent
    > USB probing until all USB controllers are loaded (specifically, the
    > ehci
    > module)?
    >
    > Any help would be appreciated.
    >
    > The machine is a Shuttle XPC 41G and only has one onboard NIC.
    >
    > --mark
    >
    > mark@node.to http://node.to/~mark 7123 3F7B 10EC 7122 2F8B
    > http://node.to/keys/mark.asc B474 B09D 6ED7 3FB0 09E8
    >
    >
    > ------------------------------
    >
    > Message: 14
    > Date: Thu, 29 Apr 2004 14:06:58 +0000
    > From: Mikkel Christensen <mikkel@talkactive.net>
    > Subject: Re: Suexec with Apache 1.3.29
    > To: Peter Risdon <peter@circlesquared.com>
    > Cc: freebsd-questions@freebsd.org
    > Message-ID: <200404291406.58150.mikkel@talkactive.net>
    > Content-Type: text/plain; charset="iso-8859-1"
    >
    > On Thursday 29 April 2004 13:57, you wrote:
    >> Mikkel Christensen wrote:
    >>>
    >> That sounds promising, suexec is now functioning. Although it's
    >> annoyingly vague, that's a common error from perl cgi scripts.
    >>
    >> It sounds permissions-related. Try running the script on the command
    >> line as the user you want the apache host to run as, and see whether
    >> it
    >> gives a more meaningful error. My first thought is that the suexec
    >> user
    >> doesn't have execute permissions on the script, or on the directory
    >> that
    >> contains it.
    >>
    >
    > I have figured it out now. I would call it quite a wierd rule!
    >
    > You are not allowed to run suexec in any combination og users you like.
    >
    > User=www Group=www -> allowed
    > User=user1 Group=user1 -> allowed
    > User=user1 Group=www -> NOT allowed
    > User=user1 Group=nobody -> alloved
    >
    > So, apperently you are only allowed to run suexec as a different user
    > and group as long as neither of them is the apache user.
    > Otherwise you can do as you like. This seems extremely strange to me.
    > But following theese rules it works as it should.
    >
    > My thanks to everybody who contributed with their knowlegde.
    >
    > - Mikkel
    >
    > ------------------------------
    >
    > Message: 15
    > Date: Thu, 29 Apr 2004 10:22:21 -0400
    > From: Marty Landman <MLandman@face2interface.com>
    > Subject: Re: Suexec with Apache 1.3.29
    > To: Mikkel Christensen <mikkel@talkactive.net>, Peter Risdon
    > <peter@circlesquared.com>
    > Cc: freebsd-questions@freebsd.org
    > Message-ID:
    > <6.0.0.22.0.20040429101444.0e68a6a0@pop.face2interface.com>
    > Content-Type: text/plain; charset="us-ascii"; format=flowed
    >
    > At 10:06 AM 4/29/2004, Mikkel Christensen wrote:
    >
    >> I have figured it out now. I would call it quite a wierd rule!
    >>
    >> You are not allowed to run suexec in any combination og users you
    >> like.
    >
    > That's right, I remember that much from the tutorials I'd read about
    > it.
    >
    >> So, apperently you are only allowed to run suexec as a different user
    >> and
    >> group as long as neither of them is the apache user.
    >
    > And so long as the permissions are less than that of root iirc.
    >
    >> Otherwise you can do as you like.
    >
    > IOW suexec should run only as a 'typical' user, which I believe is the
    > point. I think of it in terms of web customers who have high
    > permissions
    > primarily for their own space, and limited to no permissions for the
    > rest
    > of the server's name space.
    >
    >> This seems extremely strange to me.
    >
    > Why is it strange? The reason I kept trying to install suexec was
    > because
    > until I did, the development environment I set up on my LAN could
    > mirror
    > that on my real sites with the exception that all the files &
    > directories
    > had to be given 777 or equivalent permissions. Otherwise with the user
    > running my cgi's being nobody aka www or httpd files couldn't be
    > written
    > to, created, deleted etc.. With the types of web apps I write this was
    > becoming not only a royal pain, also a constant reminder to me that my
    > local environment was as insecure as it could be; of course it's
    > strictly
    > local so not a problem.
    >
    >> But following theese rules it works as it should.
    >
    > With suexec running, a cgi gets set to 744 or 700 instead of 755; a
    > data
    > file e.g. log or count file gets 644 or 600 instead of 666. It's
    > amazing to
    > me that more vandalism and cross site scripting doesn't occur given the
    > servers that still don't run suexec, or the users that aren't hip to
    > using
    > it properly for setting permissions when the server does support it.
    >
    > Marty
    >
    > Marty Landman Face 2 Interface Inc. 845-679-9387
    > Web Installed Formmailer:
    > http://face2interface.com/Products/Formal.shtml
    > FormATable DB: http://face2interface.com/Products/FormATable.shtml
    > Make a Website: http://face2interface.com/Home/Demo.shtml
    >
    >
    > ------------------------------
    >
    > Message: 16
    > Date: Thu, 29 Apr 2004 15:30:36 +0100
    > From: Dick Davies <rasputnik@hellooperator.net>
    > Subject: Re: Suexec with Apache 1.3.29
    > To: Marty Landman <MLandman@face2interface.com>
    > Cc: FreeBSD Questions <freebsd-questions@freebsd.org>
    > Message-ID: <20040429143036.GC21785@lb.tenfour>
    > Content-Type: text/plain; charset=us-ascii
    >
    > * Marty Landman <MLandman@face2interface.com> [0423 15:23]:
    >>
    >> With suexec running, a cgi gets set to 744 or 700 instead of 755; a
    >> data
    >> file e.g. log or count file gets 644 or 600 instead of 666. It's
    >> amazing to
    >> me that more vandalism and cross site scripting doesn't occur given
    >> the
    >> servers that still don't run suexec, or the users that aren't hip to
    >> using
    >> it properly for setting permissions when the server does support it.
    >
    > suexec is a pig to configure, complex and poorly documented. I think
    > that's
    > at least partly why the world runs away from CGI and towards stuff like
    > JSP/PHP....
    >
    >
    > --
    > Reality is for people who lack imagination.
    > Rasputin :: Jack of All Trades - Master of Nuns
    >
    > ------------------------------
    >
    > Message: 17
    > Date: Thu, 29 Apr 2004 10:20:22 -0500
    > From: "Darryl Hoar" <darryl@osborne-ind.com>
    > Subject: OpenLdap question - solved
    > To: <freebsd-questions@freebsd.org>
    > Message-ID: <002401c42dfd$7dcc8df0$0701a8c0@darryl>
    > Content-Type: text/plain; charset="iso-8859-1"
    >
    >>> Greetings,
    >>> I am trying to setup OpenLdap 2.0.25 from ports,
    >>> on Freebsd 5.1-release. everything is installed no
    >>> problem. openldap is started and shows running
    >>> in the process list.
    >>>
    >>> when I try to ldapadd, I get the error:
    >>>
    >>> ldap_bind: Can't contact LDAP server.
    >
    >>> I have started and stopped it, with no change in
    >>> the error. The log shows clean without error.
    >>>
    >>> when I netstat -a, I see:
    >>>
    >>> Proto Recv-Q Send-Q Local Address Foreign Address
    >>> (state)
    >>> tcp6 0 0 *.ldap *.*
    >>> LISTEN
    >>>
    >>> among other entries. this is the only one for ldap though.
    >>>
    >>> It appears to only be listening for tcp6 protocol, not tcp4. How do
    >>> I
    >>> change this ?
    >>>
    >>> thanks,
    >>> Darryl
    >
    > Well,
    > I hate to answer my own question , but to help others that
    > might search later, here it it.
    >
    > The problem ( if it is one), is that the startup script located
    > in /usr/local/etc/rc.d called slapd.sh has a configurable
    > argument that launches slapd either listening for tcp4, tcp6
    > or both. The default script ( the one installed as part of the
    > port make, make install routine) is set with no arguments
    > specified. The result is that slapd only listens for tcp6
    > traffic. The comments in the code show examples of
    > arguments to get it to listen to tcp4. Once I set the argument
    > string properly in the slapd.sh file, it listens for tcp4 and thus
    > responds when queried.
    >
    > Sorry for the wasted bandwith.
    >
    >
    >
    >
    >
    > ------------------------------
    >
    > Message: 18
    > Date: Thu, 29 Apr 2004 12:01:22 -0400
    > From: Doug Lee <dgl@dlee.org>
    > Subject: How do you keep track of what's been merged in CVS?
    > To: freebsd-questions@freebsd.org
    > Message-ID: <20040429160122.GX55912@kirk.dlee.org>
    > Content-Type: text/plain; charset=us-ascii
    >
    > I ask this here because FreeBSD is managed by CVS...
    >
    > My understanding of the FreeBSD development model is that "current" is
    > the CVS trunk, "stable" is a branch started at the latest release tag,
    > and an MFC consists of selectively merging revisions from the trunk to
    > the Stable branch. If that's right, how do you keep track of what's
    > been merged and what hasn't, particularly when merges may not occur in
    > chronological, or revision number order, or (if this applies) when a
    > merge is edited while being merged and does not contain the full
    > effect of the corresponding original code? Also, is there a way to
    > cause a file on a branch to track HEAD on the trunk automatically? (I
    > asked that on the cvs-info list and noticed no answer
    >
    > I'm learning to use CVS to manage my own (much smaller) projects, and
    > I'm just beginning to realize that if I don't find an answer to this
    > one, I'll get my head spinning pretty soon trying to keep branches up
    > to date with trunk activity.
    >
    > Thanks much. Please Cc replies to me if you think about it.
    >
    > --
    > Doug Lee dgl@dlee.org http://www.dlee.org
    > Bartimaeus Group doug@bartsite.com http://www.bartsite.com
    > "Determine that the thing can and shall be done, and then...find
    > the way." - Abraham Lincoln
    >
    > ------------------------------
    >
    > Message: 19
    > Date: Thu, 29 Apr 2004 12:04:30 -0400
    > From: "Carlos Castro" <sabisab@cantv.net>
    > Subject: Help...
    > To: <freebsd-questions@FreeBSD.ORG>
    > Message-ID: <001201c42e03$a889a8b0$0601a8c0@aguila>
    > Content-Type: text/plain; charset="us-ascii"
    >
    > Hi there:
    >
    > I'm trying to recompile my kernel to add sound abilities for my ess
    > 1869
    > sound card. I've taken the generic file and added simply the "options
    > pcm" line. The file configs, depends, and installs flawlessly. However,
    > it doesn't boot! Well, it does, but when mounting the root file system,
    > it exits with this message:
    >
    > Mounting root from ufs: /dev/ad0s2a
    > Pid 41 (sh), uid 0: exited on signal 8
    > Init: /bin/sh on /etc/rc terminated abnormally, going to single user
    > mode
    >
    > I then try to load a shell, but it exits all the time. It gives me the
    > same message again, and again...
    >
    > I've checked every single bit of information on the net regarding this
    > problem, but nothing helps...
    >
    > I have:
    >
    > Installed the kernel using security=-1; single user mode; chflags;
    > checked the /rc/sh script... Everything...
    >
    > Please help me anybody out there.
    >
    > Best regards,
    >
    > Carlos...
    >
    >
    > ------------------------------
    >
    > Message: 20
    > Date: Thu, 29 Apr 2004 09:09:44 -0700 (PDT)
    > From: peter lageotakes <plageotakes@yahoo.com>
    > Subject: Re: nvidia and dmesg
    > To: bryan cassidy <linux_kinda_guy@yahoo.com>,
    > freebsd-questions@freebsd.org
    > Message-ID: <20040429160944.38792.qmail@web14608.mail.yahoo.com>
    > Content-Type: text/plain; charset=us-ascii
    >
    >
    > --- bryan cassidy <linux_kinda_guy@yahoo.com> wrote:
    >> running freebsd 4.9 p-5 and have installed the
    >> x11/nvidia-drivers port. Works fine but in 'dmesg' I
    >> have
    >>
    >> nvidia: agp_find_device failed, chipset unsupported?
    >>
    >> here is what I have in /boot/loader.conf
    >>
    >> # -- sysinstall generated deltas -- #
    >> agp_load="YES"
    >> userconfig_script_load="YES"
    >> linux_load="YES"
    >> nvidia_load="YES"
    >> snd_emu10k1_load="YES"
    >>
    >> Please Cc: me because I am not subscribed to the
    >> list.
    >>
    >>
    >>
    >>
    >> __________________________________
    >> Do you Yahoo!?
    >> Win a $20,000 Career Makeover at Yahoo! HotJobs
    >> http://hotjobs.sweepstakes.yahoo.com/careermakeover
    >> _______________________________________________
    >> freebsd-questions@freebsd.org mailing list
    >>
    > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    >> To unsubscribe, send any mail to
    > "freebsd-questions-unsubscribe@freebsd.org"
    >
    > Hello Bryan,
    > Here is a link that might be of use:
    >
    > http://download.nvidia.com/freebsd/1.0-4365/README.txt
    >
    > FYI: dont forget to recompile your kernel to add
    > "options USER_LDT".
    > Pete
    >
    >
    >
    >
    > __________________________________
    > Do you Yahoo!?
    > Win a $20,000 Career Makeover at Yahoo! HotJobs
    > http://hotjobs.sweepstakes.yahoo.com/careermakeover
    >
    > ------------------------------
    >
    > Message: 21
    > Date: Thu, 29 Apr 2004 09:22:38 -0700
    > From: Jason Williams <jwilliams@courtesymortgage.com>
    > Subject: failed php4 install...can't figure this one out
    > To: freebsd-questions@freebsd.org
    > Message-ID:
    > <5.2.1.1.0.20040429091808.00b13150@pop.courtesymortgage.com>
    > Content-Type: text/plain; charset="us-ascii"; format=flowed
    >
    > Hello everyone.
    >
    > I'm trying to setup a web server that will be running PHP, Apache and
    > mysql. The system will be running FreeBSD 4.9.
    > The system was going to be setup to run the following program:
    >
    > http://mailwatch.sourceforge.net/
    >
    >
    > I cvsuped my ports and source tree and patched as needed.
    >
    > After that, I tried installing the following port:
    >
    > /usr/ports/lang/php4
    >
    > Granted, i'm not entirely familiar with php and noticed there are
    > quite a
    > few variations of what i can install.
    > When it came down to selecting what I wanted to build PHP with, I left
    > the
    > defaults selected, but made sure GD and MySQL were selected.
    >
    > After it crunched for awhile, I got the following error:
    >
    > configure: error: libjpeg.(a|so) not found.
    > ===> Script "configure" failed unexpectedly.
    > Please report the problem to ale@FreeBSD.org [maintainer] and attach
    > the
    > "/usr/ports/lang/php4/work/php-4.3.6/config.log" including the output
    > of the
    > failure of your make command. Also, it might be a good idea to provide
    > an
    > overview of all packages installed on your system (e.g. an `ls
    > /var/db/pkg`).
    > *** Error code 1
    >
    > Stop in /usr/ports/lang/php4.
    > *** Error code 1
    >
    > Stop in /usr/ports/lang/php4.
    >
    > I scanned through the config.log but did not see anything that stood
    > out at me.
    >
    > Any ideas on what I could be missing?
    >
    > I appreciate it.
    >
    > Jason
    >
    >
    >
    >
    > ------------------------------
    >
    > Message: 22
    > Date: Thu, 29 Apr 2004 11:27:32 -0500
    > From: "Jay Chen" <jay_chen@OFDEngineering.com>
    > Subject: Dumb question
    > To: <freebsd-questions@FreeBSD.org>
    > Message-ID:
    > <!~!
    > UENERkVCMDkAAQACAAAAAAAAAAAAAAAAABgAAAAAAAAAh4hUJpQK6kWETXTBdyGCG8KAAAA
    > QAAAAzGyZ0hRIv0Kj4SsvXdMcZQEAAAAA@OFDEngineering.com>
    >
    > Content-Type: text/plain; charset="us-ascii"
    >
    > To Whom It May Concern:
    >
    >
    >
    > I have a Dell computer with Window XP and two hard disks (76 GB each).
    > The XP is located on C: and I am planning to install the FreeBSD on the
    > second hard drive (D: at this time).
    >
    >
    >
    > I like to be able to boot either of these two Operating systems with a
    > selection at the time when I turn on the computer. Unfortunately, I
    > failed. During installation of the BSD, my understanding is that I
    > still need to have the Boot Manager residing on C. I guess that that
    > result a rewritten of the boot related files (boot manager). I can not
    > boot the XP any more. Do you have any suggestions? Where did I do
    > wrong?
    >
    >
    >
    > Thanks for your time on this matter.
    >
    >
    >
    > Best Regards,
    >
    >
    >
    > Jay Chen
    >
    > Oil Field Development Engineering, LLC
    >
    >
    >
    > 950 Threadneedle, Suite 250
    >
    > Houston, TX 77079
    >
    > 281 679 9060 ext 110 (D)
    >
    > 281 679 9075 (F)
    >
    > <mailto:jay_chen@OFDEngineering.com> jay_chen@OFDEngineering.com
    >
    >
    >
    >
    >
    >
    > ------------------------------
    >
    > Message: 23
    > Date: Thu, 29 Apr 2004 09:35:15 -0700
    > From: "MrBluez2U" <mrbluez2u@earthlink.net>
    > Subject: Installing Free BSD 5.2.1
    > To: <freebsd-questions@freebsd.org>
    > Message-ID: <OPEOKDMIDEJNJLPPMFJOIEJCCAAA.mrbluez2u@earthlink.net>
    > Content-Type: text/plain; charset="iso-8859-1"
    >
    > My system hangs when installing 5.2.1. It boots from the CD & then
    > begins
    > to boot the kernel. It hangs at the line "Time counters click every
    > 10.000
    > msecs". I've reset the BIOS to defaults. The board is an ASUS A7N8X
    > with
    > Nvidia chipset. The install CD is good because I've successfully
    > installed
    > on other computers. Does anyone have any ideas?
    >
    > Thanks
    >
    >
    > ------------------------------
    >
    > Message: 24
    > Date: Thu, 29 Apr 2004 09:39:29 -0700 (PDT)
    > From: samy lancher <washville2003@yahoo.com>
    > Subject: Weird messages in daily run report.
    > To: freebsd-questions@freebsd.org
    > Message-ID: <20040429163930.13764.qmail@web60301.mail.yahoo.com>
    > Content-Type: text/plain; charset=us-ascii
    >
    > Hello,
    > I have a freeBSD 4.7, sendmail server. I use both IMAP, squrrielmail
    > and POP3, outlook. Today i got very strange messages under "Checking
    > for rejected mail hosts:" section in my daily run report . Everyday I
    > used to get 3 to 4 messages in this section but today i recevied alot.
    > Lately the users are receiving lot of virus emails too. Is there some
    > thing i need to worry about?. Below are the messages i got in todays
    > daily report.
    >
    > mail in local queue:
    > /var/spool/mqueue is empty
    > Total requests: 0
    > Mail in submit queue:
    > /var/spool/clientmqueue is empty
    > Total requests: 0
    > Security check:
    > (output mailed separately)
    > Checking for rejected mail hosts:
    > 4 CORNERSTONE.COMSMTPNEMETHL
    > 2 cor__recip_version1.0_
    > 2 168.com
    > 1 tuftsr
    > 1 mocke
    > 1 relay.us.dnb.com
    > 1 oh-design.com__recip_version1.0_
    > 1 oh-design.com6
    > 1 oh-design.c__recip_version1.0_
    > 1 machiavelli.synacor.com
    > 1 hertzcom.hertz.com
    > 1 hertz__substg1.0_1035001E
    > 1 heci.c__substg1.0_3003001E
    > 1 gateway.2wire.net
    > 1 dfw.cnsx.com
    > 1 cornerstone__recip_version1.0_
    > 1 cornerstone.comSubject
    > 1 cornerstone.comSMTPsacsup
    > 1 cornerstone.comSMTPgilest
    > 1 cornerstone.comSMTProbertst
    > 1 cornerstone.comSMTProbertse__substg1.0_300B0102
    > 1 cornerstone.comSMTProbertse
    > 1 cornerstone.c__substg1.0_0FFF0102
    > 1 cornerstone.c__substg1.0_001A001E
    > 1 cornerstone.c__recip_version1.0_
    > 1 cornerstone.__recip_version1.0_
    > 1 cornerstone__substg1.0_00430102
    > 1 corners__substg1.0_300B0102
    > 1 cor__substg1.0_300B0102
    > 1 c__substg1.0_300B0102
    > 1 c__substg1.0_0E1D001E
    > 1 RxMore03.com
    > 1 OUTGOING64.myaccountemail.com
    > 1 OUTGOING136.myaccountemail.com
    > 1 CONERSTONE.COM
    > 1 6g4563q6f.com
    > 1 247MedsRx.com
    > 1 01C3504B.0E63
    > 1 01C34952.33BA5020
    > 1 01C33A5C.E217F910
    > 1 01C31338.33CDAF80
    > 1 01C30B51.824E1E40
    > 1 01C2F79E.CFBBCCC0
    > 1 01C2EEDD.5769A680
    > 1 01C2D379.BEBF5930
    > 1 01C2D288.B62CF4E0
    > 1 01C2CCF8.78098240
    > 1 01C2CCF4.5FBB1D60
    > 1 01C2CCF3.6A077CB0
    >
    >
    > Thanks,
    > Naveen.
    >
    >
    > ---------------------------------
    > Do you Yahoo!?
    > Win a $20,000 Career Makeover at Yahoo! HotJobs From
    > owner-freebsd-questions@FreeBSD.ORG Thu Apr 29 09:53:19 2004
    > Return-Path: <owner-freebsd-questions@FreeBSD.ORG>
    > Delivered-To: freebsd-questions@freebsd.org
    > Received: from mx1.FreeBSD.org (mx1.freebsd.org [216.136.204.125])
    > by hub.freebsd.org (Postfix) with ESMTP id 1B5D016A4CE
    > for <freebsd-questions@freebsd.org>;
    > Thu, 29 Apr 2004 09:53:19 -0700 (PDT)
    > Received: from smtp1.experience.com (shields.experience.com
    > [64.94.244.50])
    > by mx1.FreeBSD.org (Postfix) with ESMTP id D2FDA43D1F
    > for <freebsd-questions@freebsd.org>;
    > Thu, 29 Apr 2004 09:53:18 -0700 (PDT) (envelope-from cs@ctzen.com)
    > Received: from ctzen.com (rpaushter.experience.com [10.50.4.40])
    > by smtp1.experience.com (Postfix) with ESMTP id F36D51009E
    > for <freebsd-questions@freebsd.org>;
    > Thu, 29 Apr 2004 12:53:17 -0400 (EDT)
    > Message-ID: <409132FD.1020001@ctzen.com>
    > Date: Thu, 29 Apr 2004 12:53:17 -0400
    > From: Chiang Seng Chang <cs@ctzen.com>
    > User-Agent: Mozilla Thunderbird 0.5 (Windows/20040207)
    > X-Accept-Language: en-us, en
    > MIME-Version: 1.0
    > To: freebsd-questions@freebsd.org
    > Content-Type: text/plain; charset=us-ascii; format=flowed
    > Content-Transfer-Encoding: 7bit
    > Subject: kadmind and kpasswdd listen ip address
    > X-BeenThere: freebsd-questions@freebsd.org
    > X-Mailman-Version: 2.1.1
    > Precedence: list
    > List-Id: User questions <freebsd-questions.freebsd.org>
    > List-Unsubscribe:
    > <http://lists.freebsd.org/mailman/listinfo/freebsd-questions>,
    > <mailto:freebsd-questions-request@freebsd.org?subject=unsubscribe>
    > List-Archive: <http://lists.freebsd.org/pipermail/freebsd-questions>
    > List-Post: <mailto:freebsd-questions@freebsd.org>
    > List-Help: <mailto:freebsd-questions-request@freebsd.org?subject=help>
    > List-Subscribe:
    > <http://lists.freebsd.org/mailman/listinfo/freebsd-questions>,
    > <mailto:freebsd-questions-request@freebsd.org?subject=subscribe>
    >
    > hi,
    >
    > this there anyway to specify the listening ip addresses of kadmind and
    > kpasswdd ?
    >
    > -cs
    >
    > ------------------------------
    >
    > Message: 25
    > Date: Thu, 29 Apr 2004 20:02:58 +0300
    > From: Ion-Mihai Tetcu <itetcu@apropo.ro>
    > Subject: Re: Help...
    > To: "Carlos Castro" <sabisab@cantv.net>
    > Cc: freebsd-questions@FreeBSD.ORG
    > Message-ID: <20040429200258.367af8c3@it.buh.cameradicommercio.ro>
    > Content-Type: text/plain; charset=US-ASCII
    >
    > On Thu, 29 Apr 2004 12:04:30 -0400
    > "Carlos Castro" <sabisab@cantv.net> wrote:
    >
    >> Hi there:
    >
    > 1. If you use an relevant subject line your chances to get an reply are
    > bigger.
    >
    > 2. You don't say what you are running. please provide output of
    > uname -a
    >
    > 3. In case of hardware related problems including relevant part of
    > dmesg
    > is crucial.
    >
    > 4. Did you try to boot the old kernel ? If not, boot in single mode
    > (boot -s on 4.x or the relevant option in 5.x) and type: unload <CR>
    > boot kernel.old <CR>
    >
    >> I'm trying to recompile my kernel to add sound abilities for my ess
    >> 1869
    >> sound card. I've taken the generic file and added simply the "options
    >> pcm" line. The file configs, depends, and installs flawlessly.
    >> However,
    >> it doesn't boot! Well, it does, but when mounting the root file
    >> system,
    >> it exits with this message:
    >>
    >> Mounting root from ufs: /dev/ad0s2a
    >> Pid 41 (sh), uid 0: exited on signal 8
    >> Init: /bin/sh on /etc/rc terminated abnormally, going to single user
    >> mode
    >
    > You must have changed something else too.
    >
    >
    > --
    > IOnut
    > Unregistered ;) FreeBSD "user"
    >
    >
    > ------------------------------
    >
    > Message: 26
    > Date: Thu, 29 Apr 2004 12:57:23 -0400
    > From: Bill Moran <wmoran@potentialtech.com>
    > Subject: Re: Weird messages in daily run report.
    > To: samy lancher <washville2003@yahoo.com>
    > Cc: freebsd-questions@freebsd.org
    > Message-ID: <409133F3.4030009@potentialtech.com>
    > Content-Type: text/plain; charset=us-ascii; format=flowed
    >
    > samy lancher wrote:
    >> Hello,
    >> I have a freeBSD 4.7, sendmail server. I use both IMAP, squrrielmail
    >> and POP3, outlook.
    >> Today i got very strange messages under "Checking for rejected mail
    >> hosts:" section in
    >> my daily run report . Everyday I used to get 3 to 4 messages in this
    >> section but today
    >> i recevied alot. Lately the users are receiving lot of virus emails
    >> too. Is there some
    >> thing i need to worry about?. Below are the messages i got in todays
    >> daily report.
    >
    > These messages mean your mail server is refusing to relay mail for the
    > servers listed.
    > It's most likely someone hoping to hijack your server to relay spam.
    > The fact that
    > they're failing is A Good Thing.
    >
    >>
    >> mail in local queue:
    >> /var/spool/mqueue is empty
    >> Total requests: 0
    >> Mail in submit queue:
    >> /var/spool/clientmqueue is empty
    >> Total requests: 0
    >> Security check:
    >> (output mailed separately)
    >> Checking for rejected mail hosts:
    >> 4 CORNERSTONE.COMSMTPNEMETHL
    >> 2 cor__recip_version1.0_
    >> 2 168.com
    >> 1 tuftsr
    >> 1 mocke
    >> 1 relay.us.dnb.com
    >> 1 oh-design.com__recip_version1.0_
    >> 1 oh-design.com6
    >> 1 oh-design.c__recip_version1.0_
    >> 1 machiavelli.synacor.com
    >> 1 hertzcom.hertz.com
    >> 1 hertz__substg1.0_1035001E
    >> 1 heci.c__substg1.0_3003001E
    >> 1 gateway.2wire.net
    >> 1 dfw.cnsx.com
    >> 1 cornerstone__recip_version1.0_
    >> 1 cornerstone.comSubject
    >> 1 cornerstone.comSMTPsacsup
    >> 1 cornerstone.comSMTPgilest
    >> 1 cornerstone.comSMTProbertst
    >> 1 cornerstone.comSMTProbertse__substg1.0_300B0102
    >> 1 cornerstone.comSMTProbertse
    >> 1 cornerstone.c__substg1.0_0FFF0102
    >> 1 cornerstone.c__substg1.0_001A001E
    >> 1 cornerstone.c__recip_version1.0_
    >> 1 cornerstone.__recip_version1.0_
    >> 1 cornerstone__substg1.0_00430102
    >> 1 corners__substg1.0_300B0102
    >> 1 cor__substg1.0_300B0102
    >> 1 c__substg1.0_300B0102
    >> 1 c__substg1.0_0E1D001E
    >> 1 RxMore03.com
    >> 1 OUTGOING64.myaccountemail.com
    >> 1 OUTGOING136.myaccountemail.com
    >> 1 CONERSTONE.COM
    >> 1 6g4563q6f.com
    >> 1 247MedsRx.com
    >> 1 01C3504B.0E63
    >> 1 01C34952.33BA5020
    >> 1 01C33A5C.E217F910
    >> 1 01C31338.33CDAF80
    >> 1 01C30B51.824E1E40
    >> 1 01C2F79E.CFBBCCC0
    >> 1 01C2EEDD.5769A680
    >> 1 01C2D379.BEBF5930
    >> 1 01C2D288.B62CF4E0
    >> 1 01C2CCF8.78098240
    >> 1 01C2CCF4.5FBB1D60
    >> 1 01C2CCF3.6A077CB0
    >
    >
    > --
    > Bill Moran
    > Potential Technologies
    > http://www.potentialtech.com
    >
    > ------------------------------
    >
    > Message: 27
    > Date: Thu, 29 Apr 2004 17:01:31 +0000
    > From: Mikkel Christensen <mikkel@talkactive.net>
    > Subject: Re: Installing Free BSD 5.2.1
    > To: freebsd-questions@freebsd.org
    > Message-ID: <200404291701.32037.mikkel@talkactive.net>
    > Content-Type: text/plain; charset="iso-8859-1"
    >
    > On Thursday 29 April 2004 16:35, MrBluez2U wrote:
    >> My system hangs when installing 5.2.1. It boots from the CD & then
    >> begins
    >> to boot the kernel. It hangs at the line "Time counters click every
    >> 10.000
    >> msecs". I've reset the BIOS to defaults. The board is an ASUS A7N8X
    >> with
    >> Nvidia chipset. The install CD is good because I've successfully
    >> installed
    >> on other computers. Does anyone have any ideas?
    >>
    >
    > Try with an older CD drive. I've tried numerous times when new drives
    > are failing me at some point of the installation.
    > Older slower drives works just fine. After FreeBSD is installed the
    > new drives work just fine.
    >
    > My theory is that the installation program only has primitive
    > CD-drivers that can't cope with many new high speed drives.
    > Of course I know nothing about this. But older drives tend to work:)
    >
    > - Mikkel
    >
    > ------------------------------
    >
    > Message: 28
    > Date: Thu, 29 Apr 2004 13:02:06 -0400
    > From: Bill Moran <wmoran@potentialtech.com>
    > Subject: Re: Dumb question
    > To: Jay Chen <jay_chen@OFDEngineering.com>
    > Cc: freebsd-questions@FreeBSD.org
    > Message-ID: <4091350E.8050807@potentialtech.com>
    > Content-Type: text/plain; charset=us-ascii; format=flowed
    >
    > Jay Chen wrote:
    >> To Whom It May Concern:
    >>
    >> I have a Dell computer with Window XP and two hard disks (76 GB each).
    >> The XP is located on C: and I am planning to install the FreeBSD on
    >> the
    >> second hard drive (D: at this time).
    >>
    >> I like to be able to boot either of these two Operating systems with a
    >> selection at the time when I turn on the computer. Unfortunately, I
    >> failed. During installation of the BSD, my understanding is that I
    >> still need to have the Boot Manager residing on C. I guess that that
    >> result a rewritten of the boot related files (boot manager). I can
    >> not
    >> boot the XP any more. Do you have any suggestions? Where did I do
    >> wrong?
    >
    > It's difficult to be sure what went wrong without more details on
    > exactly
    > what you did. I can say two things about it:
    > 1) It is possible, as I've seen others do it.
    > 2) You're not the first person to have difficulty, so it's probably a
    > somewhat difficult thing to do.
    >
    > sysinstall is capable of setting up dual-boot automatically when you
    > only
    > have one hard drive, but it seems like it has problems sometimes when
    > there
    > are two hard drives.
    >
    > On the flip side, you should be able to get Windows XP booting again by
    > doing the following:
    >
    > 1) Find a working windows computer (doesn't matter which version of
    > Windows
    > as far as I know)
    > 2) Use the Windows format program to make a bootable floppy.
    > 3) Copy the fdisk program from the c: drive to the floppy disk
    > 4) Boot the computer with the problem off the floppy
    > 5) When you get an A: prompt, enter "fdisk /mbr"
    > 6) You should then be able to reboot the computer and have Windows XP
    > work
    > again.
    >
    > --
    > Bill Moran
    > Potential Technologies
    > http://www.potentialtech.com
    >
    > ------------------------------
    >
    > Message: 29
    > Date: Thu, 29 Apr 2004 17:13:13 +0000
    > From: Mikkel Christensen <mikkel@talkactive.net>
    > Subject: Re: Suexec with Apache 1.3.29
    > To: freebsd-questions@freebsd.org
    > Message-ID: <200404291713.13999.mikkel@talkactive.net>
    > Content-Type: text/plain; charset="iso-8859-1"
    >
    > On Thursday 29 April 2004 14:22, Marty Landman wrote:
    >> At 10:06 AM 4/29/2004, Mikkel Christensen wrote:
    >>
    >>> This seems extremely strange to me.
    >>
    >> Why is it strange? The reason I kept trying to install suexec was
    >> because
    >> until I did, the development environment I set up on my LAN could
    >> mirror
    >> that on my real sites with the exception that all the files &
    >> directories
    >> had to be given 777 or equivalent permissions. Otherwise with the user
    >> running my cgi's being nobody aka www or httpd files couldn't be
    >> written
    >> to, created, deleted etc.. With the types of web apps I write this was
    >> becoming not only a royal pain, also a constant reminder to me that my
    >> local environment was as insecure as it could be; of course it's
    >> strictly
    >> local so not a problem.
    >
    > Okay, I can see your point.
    > But, I still find it annoying that suexec wont execute a script that
    > is owned by a particular user if another user has group rights to the
    > script.
    > Eg I would like execution to be run under user1, both the User end
    > Group.
    >
    > My idea is that if the file is owned by user1 and the file's group is
    > www it would give more possibilities to the user for denying other
    > users access.
    >
    > Eg. the user (user1) could deny other regular users on the server
    > access by sætting chmod xx0.
    > He could allow the webserver to read his files with chmod x4x and the
    > give execution, read and write rights to himself with chmod 7xx.
    > Now he has to give the webserver the same rights as everybody else on
    > the server. This is a problem if he stores passwords in a php-script.
    > Apache will interpret it and therefore not let anyone se the source
    > while other users can read the content as they please.
    > This seems to be more unsecure, or am I wrong?
    > I get the idea that if other group members have access to the file
    > they could potentially write their own content. Bus usually the group
    > doen's have write access to files. And also, no users are members of
    > the www group by default.
    >
    >>
    >>> But following theese rules it works as it should.
    >>
    >> With suexec running, a cgi gets set to 744 or 700 instead of 755; a
    >> data
    >> file e.g. log or count file gets 644 or 600 instead of 666. It's
    >> amazing to
    >> me that more vandalism and cross site scripting doesn't occur given
    >> the
    >> servers that still don't run suexec, or the users that aren't hip to
    >> using
    >> it properly for setting permissions when the server does support it.
    >>
    >
    > Can't argue with that:)
    >
    > - Mikkel
    >
    > ------------------------------
    >
    > Message: 30
    > Date: Thu, 29 Apr 2004 17:17:48 +0000
    > From: Mikkel Christensen <mikkel@talkactive.net>
    > Subject: Re: failed php4 install...can't figure this one out
    > To: freebsd-questions@freebsd.org
    > Message-ID: <200404291717.48287.mikkel@talkactive.net>
    > Content-Type: text/plain; charset="iso-8859-1"
    >
    > On Thursday 29 April 2004 16:22, Jason Williams wrote:
    >> After that, I tried installing the following port:
    >>
    >> /usr/ports/lang/php4
    >>
    >> Granted, i'm not entirely familiar with php and noticed there are
    >> quite a
    >> few variations of what i can install.
    >> When it came down to selecting what I wanted to build PHP with, I
    >> left the
    >> defaults selected, but made sure GD and MySQL were selected.
    >>
    >> After it crunched for awhile, I got the following error:
    >>
    >> configure: error: libjpeg.(a|so) not found.
    >> ===> Script "configure" failed unexpectedly.
    >> Please report the problem to ale@FreeBSD.org [maintainer] and attach
    >> the
    >> "/usr/ports/lang/php4/work/php-4.3.6/config.log" including the output
    >> of the
    >> failure of your make command. Also, it might be a good idea to
    >> provide an
    >> overview of all packages installed on your system (e.g. an `ls
    >> /var/db/pkg`).
    >> *** Error code 1
    >>
    >> Stop in /usr/ports/lang/php4.
    >> *** Error code 1
    >>
    >> Stop in /usr/ports/lang/php4.
    >>
    >
    > You should not install ports directly from the /usr/ports/lang
    > directory.
    > The content here seems to be ports that other ports use in a
    > combination. Not stand alone ports.
    > My guess is that /usr/ports/lang/php4 propably does not have a
    > dependency list and therefore required ports are not installed
    > automatically.
    > Instead, try /usr/ports/www/mod_php4 or /usr/ports/www/php4-cgi
    >
    > That will work - i hope:)
    >
    > - Mikkel
    >
    > ------------------------------
    >
    > Message: 31
    > Date: Thu, 29 Apr 2004 18:32:18 +0100
    > From: Peter Risdon <peter@circlesquared.com>
    > Subject: Re: failed php4 install...can't figure this one out
    > To: Mikkel Christensen <mikkel@talkactive.net>
    > Cc: freebsd-questions@freebsd.org
    > Message-ID: <40913C22.4020903@circlesquared.com>
    > Content-Type: text/plain; charset=ISO-8859-1; format=flowed
    >
    > Mikkel Christensen wrote:
    >
    >> On Thursday 29 April 2004 16:22, Jason Williams wrote:
    >>
    >>
    >>> After that, I tried installing the following port:
    >>>
    >>> /usr/ports/lang/php4
    >>>
    >>> Granted, i'm not entirely familiar with php and noticed there are
    >>> quite a
    >>> few variations of what i can install.
    >>> When it came down to selecting what I wanted to build PHP with, I
    >>> left the
    >>> defaults selected, but made sure GD and MySQL were selected.
    >>>
    >>> After it crunched for awhile, I got the following error:
    >>>
    >>> configure: error: libjpeg.(a|so) not found.
    >>> ===> Script "configure" failed unexpectedly.
    >>> Please report the problem to ale@FreeBSD.org [maintainer] and attach
    >>> the
    >>> "/usr/ports/lang/php4/work/php-4.3.6/config.log" including the
    >>> output of the
    >>> failure of your make command. Also, it might be a good idea to
    >>> provide an
    >>> overview of all packages installed on your system (e.g. an `ls
    >>> /var/db/pkg`).
    >>> *** Error code 1
    >>>
    >>> Stop in /usr/ports/lang/php4.
    >>> *** Error code 1
    >>>
    >>> Stop in /usr/ports/lang/php4.
    >>>
    >>>
    >>>
    >>
    >> You should not install ports directly from the /usr/ports/lang
    >> directory.
    >> The content here seems to be ports that other ports use in a
    >> combination. Not stand alone ports.
    >>
    >>
    >
    > I don't think that's true. You're right to say that other ports use
    > this
    > directory; take the mod_php4 port as an example. The Makefile is:
    >
    > less /usr/ports/www/mod_php4/Makefile
    > # New ports collection makefile for: mod_php4
    > # Date created: Sun May 28 11:31:54 CEST 2000
    > # Whom: Dirk Froemberg <dirk@FreeBSD.org>
    > #
    > # $FreeBSD: ports/www/mod_php4/Makefile,v 1.191 2003/06/06 17:43:59
    > nork
    > Exp $
    > #
    > # Instructions on how to enable preferred extensions can be found in
    > the
    > # Makefile of the master port (lang/php4).
    > #
    >
    > PORTEPOCH= 1
    > CATEGORIES= www
    >
    > MAINTAINER= sysadmin@alexdupre.com
    >
    > PKGMESSAGE= ${.CURDIR}/pkg-message
    > MASTERDIR= ${.CURDIR}/../../lang/php4
    >
    > WITHOUT_CLI= yes
    >
    > .include "${MASTERDIR}/Makefile"
    >
    >
    > So it's a sort of wrapper for lang/php4 with the configure argument
    > WITHOUT_CLI = yes but you should still be able to use the lang/php4
    > port
    > if you wish. I always do.
    >
    > The problem for the OP is a dependency, though. No idea why it wasn't
    > pulled in automatically but the fix would be to install graphics/jpeg
    > and try again.
    >
    > PWR.
    >
    >
    >
    > ------------------------------
    >
    > Message: 32
    > Date: Thu, 29 Apr 2004 20:42:02 +0300
    > From: Ion-Mihai Tetcu <itetcu@apropo.ro>
    > Subject: Re: failed php4 install...can't figure this one out
    > To: Mikkel Christensen <mikkel@talkactive.net>
    > Cc: freebsd-questions@freebsd.org
    > Message-ID: <20040429204202.747e4cb5@it.buh.cameradicommercio.ro>
    > Content-Type: text/plain; charset=US-ASCII
    >
    >
    > [ 72 chars / line, please ]
    >
    > On Thu, 29 Apr 2004 17:17:48 +0000
    > Mikkel Christensen <mikkel@talkactive.net> wrote:
    >
    >> On Thursday 29 April 2004 16:22, Jason Williams wrote:
    >>> After that, I tried installing the following port:
    >>>
    >>> /usr/ports/lang/php4
    >>>
    >>> Granted, i'm not entirely familiar with php and noticed there are
    >>> quite a few variations of what i can install.
    >>> When it came down to selecting what I wanted to build PHP with, I
    >>> left the defaults selected, but made sure GD and MySQL were
    >>> selected.
    > [..]
    >
    >>>
    >>
    >> You should not install ports directly from the /usr/ports/lang
    >> directory.
    >
    > You are wrong all the way. Pleas don't FUD people if you have no clue.
    > Take a look at the Makefile first.
    >
    >> The content here seems to be ports that other ports use in a
    >> combination. Not stand alone ports.
    >
    > Wrong.
    >
    >> My guess is that
    >> /usr/ports/lang/php4 propably does not have a dependency list and
    >> therefore required ports are not installed automatically.
    >
    > I doubt, but for the OP:
    > - uname -a
    > - date of last cvsup for ports, and the tag from cvsup file
    > - cat /var/db/ports/php4/options
    >
    > Thanks,
    >
    >
    > --
    > IOnut
    > Unregistered ;) FreeBSD "user"
    >
    >
    > ------------------------------
    >
    > Message: 33
    > Date: Thu, 29 Apr 2004 17:44:17 +0000
    > From: Mikkel Christensen <mikkel@talkactive.net>
    > Subject: Re: failed php4 install...can't figure this one out
    > To: freebsd-questions@freebsd.org
    > Message-ID: <200404291744.17672.mikkel@talkactive.net>
    > Content-Type: text/plain; charset="iso-8859-1"
    >
    > On Thursday 29 April 2004 17:42, Ion-Mihai Tetcu wrote:
    >>
    >> [ 72 chars / line, please ]
    >>
    >> On Thu, 29 Apr 2004 17:17:48 +0000
    >> Mikkel Christensen <mikkel@talkactive.net> wrote:
    >>
    >>> On Thursday 29 April 2004 16:22, Jason Williams wrote:
    >>>> After that, I tried installing the following port:
    >>>>
    >>>> /usr/ports/lang/php4
    >>>>
    >>>> Granted, i'm not entirely familiar with php and noticed there are
    >>>> quite a few variations of what i can install.
    >>>> When it came down to selecting what I wanted to build PHP with, I
    >>>> left the defaults selected, but made sure GD and MySQL were
    >>>> selected.
    >> [..]
    >>
    >>>>
    >>>
    >>> You should not install ports directly from the /usr/ports/lang
    >>> directory.
    >>
    >> You are wrong all the way. Pleas don't FUD people if you have no clue.
    >> Take a look at the Makefile first.
    >>
    >
    > Thats was why I wrote "my guess is"... I'm not telling anyone how
    > things are.
    >
    > ------------------------------
    >
    > Message: 34
    > Date: Thu, 29 Apr 2004 20:48:45 +0300
    > From: Ion-Mihai Tetcu <itetcu@apropo.ro>
    > Subject: Re: failed php4 install...can't figure this one out
    > To: Jason Williams <jwilliams@courtesymortgage.com>
    > Cc: freebsd-questions@freebsd.org
    > Message-ID: <20040429204845.4cba0a87@it.buh.cameradicommercio.ro>
    > Content-Type: text/plain; charset=US-ASCII
    >
    > On Thu, 29 Apr 2004 09:22:38 -0700
    > Jason Williams <jwilliams@courtesymortgage.com> wrote:
    >
    >> Hello everyone.
    >>
    >> I'm trying to setup a web server that will be running PHP, Apache and
    >> mysql. The system will be running FreeBSD 4.9.
    >> The system was going to be setup to run the following program:
    >>
    >> http://mailwatch.sourceforge.net/
    >
    > Unrelevant.
    >
    >> I cvsuped my ports and source tree and patched as needed.
    >>
    >> After that, I tried installing the following port:
    >>
    >> /usr/ports/lang/php4
    >>
    >> Granted, i'm not entirely familiar with php and noticed there are
    >> quite a
    >> few variations of what i can install.
    >> When it came down to selecting what I wanted to build PHP with, I
    >> left the
    >> defaults selected, but made sure GD and MySQL were selected.
    >
    > OK.
    >
    >> After it crunched for awhile, I got the following error:
    >>
    >> configure: error: libjpeg.(a|so) not found.
    >> ===> Script "configure" failed unexpectedly.
    >> Please report the problem to ale@FreeBSD.org [maintainer] and attach
    >> the
    >> "/usr/ports/lang/php4/work/php-4.3.6/config.log" including the output
    >> of the
    >> failure of your make command. Also, it might be a good idea to
    >> provide an
    >> overview of all packages installed on your system (e.g. an `ls
    >> /var/db/pkg`).
    >> *** Error code 1
    >
    > And what do you do when reading above ?
    >
    > config.log ?
    > ls /var/db/pkg ?
    >
    > How can we guess ?
    >
    >> I scanned through the config.log but did not see anything that stood
    >> out at me.
    >
    > We didn't see your config.log, you know.
    >
    >> Any ideas on what I could be missing?
    >
    > http://www.lemis.com/questions.html
    >
    >
    > --
    > IOnut
    > Unregistered ;) FreeBSD "user"
    >
    >
    > ------------------------------
    >
    > Message: 35
    > Date: Thu, 29 Apr 2004 20:52:09 +0300
    > From: Ion-Mihai Tetcu <itetcu@apropo.ro>
    > Subject: Re: failed php4 install...can't figure this one out
    > To: Peter Risdon <peter@circlesquared.com>
    > Cc: Mikkel Christensen <mikkel@talkactive.net>
    > Message-ID: <20040429205209.256b3995@it.buh.cameradicommercio.ro>
    > Content-Type: text/plain; charset=US-ASCII
    >
    > On Thu, 29 Apr 2004 18:32:18 +0100
    > Peter Risdon <peter@circlesquared.com> wrote:
    >
    >> Mikkel Christensen wrote:
    >>
    >>> On Thursday 29 April 2004 16:22, Jason Williams wrote:
    >>>
    >>>
    >>>> After that, I tried installing the following port:
    >>>>
    >>>> /usr/ports/lang/php4
    >
    > [..]
    >
    >>>> configure: error: libjpeg.(a|so) not found.
    >>>> ===> Script "configure" failed unexpectedly.
    >
    > [..]
    >
    >> I don't think that's true. You're right to say that other ports use
    >> this
    >> directory; take the mod_php4 port as an example. The Makefile is:
    >
    > [..]
    >
    >> So it's a sort of wrapper for lang/php4 with the configure argument
    >> WITHOUT_CLI = yes but you should still be able to use the lang/php4
    >> port
    >> if you wish. I always do.
    >
    > Obvious.
    >
    >> The problem for the OP is a dependency, though. No idea why it wasn't
    >> pulled in automatically
    >
    > It should be:
    >
    > .if defined(WITH_GD)
    > LIB_DEPENDS+= freetype.9:${PORTSDIR}/print/freetype2
    > LIB_DEPENDS+= t1.5:${PORTSDIR}/devel/t1lib
    > LIB_DEPENDS+= png.5:${PORTSDIR}/graphics/png
    > LIB_DEPENDS+= jpeg.9:${PORTSDIR}/graphics/jpeg
    > CONFIGURE_ARGS+=--with-gd \
    > --enable-gd-native-ttf \
    > --enable-gd-jis-conv \
    > --with-freetype-dir=${LOCALBASE} \
    > --with-t1lib=${LOCALBASE} \
    > --with-jpeg-dir=${LOCALBASE} \
    > --with-png-dir=${LOCALBASE}
    > .if !defined(WITHOUT_X11)
    > LIB_DEPENDS+= Xpm.4:${PORTSDIR}/x11/XFree86-4-libraries
    > CONFIGURE_ARGS+=--with-xpm-dir=${X11BASE}
    > .endif
    > .if defined(WITH_LZW)
    > CONFIGURE_ARGS+=--enable-gd-lzw-gif
    > .endif
    > .endif
    >
    >
    >> but the fix would be to install graphics/jpeg and try again.
    >
    > I've builded today on an 5-current and is OK. The OP should provide
    > more details.
    >
    >
    > --
    > IOnut
    > Unregistered ;) FreeBSD "user"
    >
    >
    > ------------------------------
    >
    > Message: 36
    > Date: Thu, 29 Apr 2004 20:58:13 +0300
    > From: Ion-Mihai Tetcu <itetcu@apropo.ro>
    > Subject: Re: failed php4 install...can't figure this one out
    > To: Mikkel Christensen <mikkel@talkactive.net>
    > Cc: freebsd-questions@freebsd.org
    > Message-ID: <20040429205813.13f7d18e@it.buh.cameradicommercio.ro>
    > Content-Type: text/plain; charset=US-ASCII
    >
    > On Thu, 29 Apr 2004 17:44:17 +0000
    > Mikkel Christensen <mikkel@talkactive.net> wrote:
    >
    >> On Thursday 29 April 2004 17:42, Ion-Mihai Tetcu wrote:
    >>>
    >>> [ 72 chars / line, please ]
    >>>
    >>> On Thu, 29 Apr 2004 17:17:48 +0000
    >>> Mikkel Christensen <mikkel@talkactive.net> wrote:
    >>>
    >>>> On Thursday 29 April 2004 16:22, Jason Williams wrote:
    >>>>> After that, I tried installing the following port:
    >>>>>
    >>>>> /usr/ports/lang/php4
    >>>>>
    >>>>> Granted, i'm not entirely familiar with php and noticed there are
    >>>>> quite a few variations of what i can install.
    >>>>> When it came down to selecting what I wanted to build PHP with, I
    >>>>> left the defaults selected, but made sure GD and MySQL were
    >>>>> selected.
    >>> [..]
    >>>
    >>>>>
    >>>>
    >>>> You should not install ports directly from the /usr/ports/lang
    >>>> directory.
    >>>
    >>> You are wrong all the way. Pleas don't FUD people if you have no
    >>> clue.
    >>> Take a look at the Makefile first.
    >>>
    >>
    >> Thats was why I wrote "my guess is"... I'm not telling anyone how
    >> things are.
    >
    > Please start the reply with those words then; other may miss as I did,
    > sorry.
    > Thanks.
    >
    > There are no such ports that "other ports use in a combination" the way
    > you see it; if an dependence is not being pulled out automatically that
    > means the port is broken, which is not the case, AFAIK. At least on one
    > of my 5.x system I've installed today.
    >
    >
    > --
    > IOnut
    > Unregistered ;) FreeBSD "user"
    >
    >
    > ------------------------------
    >
    > _______________________________________________
    > freebsd-questions@freebsd.org mailing list
    > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    > To unsubscribe, send any mail to
    > "freebsd-questions-unsubscribe@freebsd.org"
    >
    > End of freebsd-questions Digest, Vol 58, Issue 13
    > *************************************************
    >

    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"


  • Next message: Markie: "Fw: make release broken?"

    Relevant Pages

    • Re: BTX loader hangs after version info
      ... It stops immediately after "BTX loader 1.00 BTX version 1.02", ... that version too hangs after "BTX loader 1.00 ... The install CD boots fine. ... system between the last successful boot and the unsuccessful one. ...
      (freebsd-stable)
    • Re: REPOST - Installation Bug - All available versions hang on install
      ... > FreeBSD hangs without errors early in the install process on my computer. ... > and attempted a floppy boot disk. ...
      (freebsd-hackers)
    • Re: Best way to install second version of Debian?
      ... You will be asked if you want to install a boot manager. ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx ... Trouble? ...
      (Debian-User)
    • FC2 problems on Dell latitude C600
      ... Just did the install with kickstart and have ... The usual hang on first boot around the USB area probably because the ... boot hangs after running windows first without a power cycle. ...
      (Fedora)
    • Re: Using old diskless machine as X terminal
      ... Install Cygwin. ... If you set the X server to be full screen then you can alt-tab between the MS-Windows environment and the *nix environment. ... Otherwise for a box that can't boot from cdrom or NIC it would seem you'd be stuck with floppy booting. ... To UNSUBSCRIBE, email to debian-user-REQUEST@xxxxxxxxxxxxxxxx with a subject of "unsubscribe". ...
      (Debian-User)