Re: ProFTPd installation / configuration help needed

From: David E. Meier (dev_at_eth0.ch)
Date: 05/14/04

  • Next message: Peter Schuller: "Re: USB Storage devices (Cigar/Pen) in FreeBSD?"
    Date: Fri, 14 May 2004 22:59:10 +0200 (CEST)
    To: freebsd-questions@freebsd.org
    
    

    Hi,

    it seems you have ProFTPd configured as an inetd service and in this setup
    it will be started by the inetd daemon upon connection. Try to connect and
    see what it puts out.

    You might also want to check the archive. There was a thread about a month
    ago regarding setting up ProFTPd.

    Dave

    > I have installed ProFTPd from the ports collection on a FBSD 5.2.1
    > system. The only problem is, it doesn't start up. I know I have to set /
    > change the ftp line in the
    > /etc/inetd.conf
    > i also have setup a user account on the system called ftp and the group
    > ftp.
    > Any help would be great
    > Here is the entire inetd.conf file
    > ----------------------------------------------------------------------------
    > # Internet server configuration database
    > #
    > # Define *both* IPv4 and IPv6 entries for dual-stack support.
    > # To disable a service, comment it out by prefixing the line with '#'.
    > # To enable a service, remove the '#' at the beginning of the line.
    > #
    > ftp stream tcp nowait root in.proftpd
    > in.proftpd
    > <-----------------------------------????????
    > #ftp stream tcp6 nowait root /usr/libexec/ftpd ftpd -l
    > ssh stream tcp nowait root /usr/sbin/sshd sshd -i -4
    > #imap4 stream tcp nowait root /usr/local/libexec/imapd
    > imapd
    > #
    > # example entry for the optional nntp server
    > #
    > #nntp stream tcp nowait news /usr/local/libexec/nntpd
    > nntpd
    > #
    > # example entry for the optional uucpd server
    > #
    > #uucpd stream tcp nowait root /usr/local/libexec/uucpd
    > uucpd
    > #
    > # Return error for all "ident" requests
    > #
    > #auth stream tcp nowait root internal
    > #auth stream tcp6 nowait root internal
    > #
    > # Provide internally a real "ident" service which provides ~/.fakeid
    > support,
    > # provides ~/.noident support, reports UNKNOWN as the operating system
    > type
    > # and times out after 30 seconds.
    > #
    > #auth stream tcp nowait root internal auth -r -f -n -o
    > UNKNOWN -t 30
    > #auth stream tcp6 nowait root internal auth -r -f -n -o
    > UNKNOWN -t 30
    > #
    > # Example entry for an external ident server
    > #
    > #auth stream tcp wait root /usr/local/sbin/identd identd
    > -w -t120
    > #
    > # Example entry for the optional qmail MTA
    > # NOTE: This is no longer the correct way to handle incoming SMTP
    > # connections for qmail. Use tcpserver
    > (http://cr.yp.to/ucspi-tcp.html)
    > # instead.
    > #
    > #smtp stream tcp nowait qmaild /var/qmail/bin/tcp-env tcp-env
    > /var/qmail/bin/qmail-smtpd
    > #
    > # Enable the following two entries to enable samba startup from inetd
    > # (from the Samba documentation). Enable the third entry to enable the
    > swat
    > # samba configuration tool.
    > #
    > #netbios-ssn stream tcp nowait root /usr/local/sbin/smbd
    > smbd
    > #netbios-ns dgram udp wait root /usr/local/sbin/nmbd
    > nmbd
    > #swat stream tcp nowait/400 root /usr/local/sbin/swat
    > swat
    > -------------------------------------------------------------------------------------------------
    > _______________________________________________
    > freebsd-questions@freebsd.org mailing list
    > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    > To unsubscribe, send any mail to
    > "freebsd-questions-unsubscribe@freebsd.org"
    >
    >

    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"


  • Next message: Peter Schuller: "Re: USB Storage devices (Cigar/Pen) in FreeBSD?"

    Relevant Pages

    • Re: inetd to take telnet request
      ... flavours of TELNET here - so I read on. ... I know about INETD only from long ago with the RS/6000 UNIX, ... server applications" in the CS IP Configuration Guide: ...
      (bit.listserv.ibm-main)
    • Windows SBS 2008 Backup configuration error
      ... I'm brand new to Windows SBS 2008 and it is the first MS server I have used. ... the server installation and before making any configuration changes. ... TechNet entry pointed me to SBCW.log. ...
      (microsoft.public.windows.server.sbs)
    • Re: Setting xvnc geometry from inetd
      ... I have a vnc server configured on inetd on a linux box. ... I am using the following configuration: ... The geometry is different than any other configured on the X server on that machine. ... I wanted to know if it is possible to have a geometry on the virtual desktop completely different that the one configured on the display adapter of the server. ...
      (comp.unix.admin)
    • Re: SBS SP 1 installation error
      ... Component Name: Microsoft Exchange Forest Preparation ... Component Name: Server Configuration ... Component Name: Windows Server 2003 Configuration ... Component Name: Networking Configuration ...
      (microsoft.public.windows.server.sbs)
    • Re: SBS 2003 Misconfigured?
      ... The netgear has a setting for the Internet IP which is set to the ... DNS server address is set to SBS server's ip 192.168.5.109 ... but something else is clearly awry if you can't get DHCP ... Which, based on the configuration you gave, is part of the problem. ...
      (microsoft.public.windows.server.sbs)