To: <freebsd-questions@freebsd.org>
Date: Tue, 29 Jun 2004 20:03:49 -0400
Anyone using poweredge 1750 's with raid ?
FreeBSD installed smoothly but if i remove a drive and the array is degraded
, i dont see
any messages in the logs .
Software RAID-1 with Mandrake9.0 problems - LONG ... I have configured RAID -1 ... md: md0: raid array is not clean -- starting background reconstruction ... ...trying to set up timer as Virtual Wire IRQ......host bus clock speed is 132.8612 MHz. ... (comp.os.linux.setup)
Re: Problems with software RAID on SATA ... Connected to this are two 320GB drives... >>which I want to turn into a RAID1 array.... >>I'm almost certain it's a problem with initting the RAID arrays at boot.... (Debian-User)
Re: RAID newbie...can I have several partitions on a RAID 1 array? ... You haven't expounded upon why you think you need raid.... better backup device rather than buy 2 cheap RAID HBAs. ...RAID array then I would have to replace the mobo with the same one or at ... Lets say, for example, you buy 2 identical model drives, from ... (comp.sys.ibm.pc.hardware.storage)
Re: [PATCH 000 of 5] md: Introduction ... "why linux raid isn't Raid really, why it can be worse than plain disk") ... After this, the array... error is in the filesystem, due to the complex layout of raid5. ... hundreds or 1000s of drives, you've quite high probability that some of them will fail sometimes, or will develop a bad sector etc). ... (Linux-Kernel)
Re: Windows XP RAID 5 ...array "disappears". ... Looking at Tom's guide to Windows XP RAID 5, ... Performance alone isn;t that big an issue for me - disk... than 500 gig, I want it all in one easy to find and organise place. ... (uk.comp.homebuilt)
