kernel compilation gives error

• Previous message: Siddhartha Jain: "Bandwidth shaping for different flows"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Date: Mon, 9 Aug 2004 04:48:58 -0700 (PDT)
To: freebsd-questions@freebsd.org

Hi there,

on my laptop I get the following error when doing
"make buildkernel KERNCONF=MYKERNEL"

The last part of the error message is:
@ -> /usr/src/sys
machine -> /usr/src/sys/i386/include
echo "#define INET 1" > opt_inet.h
perl @/kern/vnode_if.pl -h @/kern/vnode_if.src
rm -f .depend
mkdep -f .depend -a -nostdinc -D_KERNEL -DKLD_MODULE
-I- -I. -I@ -I@/../include
-I/usr/obj/usr/src/i386/usr/include
/usr/src/sys/modules/if_tun/../../net/if_tun.c
===> if_vlan
@ -> /usr/src/sys
machine -> /usr/src/sys/i386/include
echo "#define INET 1" > opt_inet.h
rm -f .depend
mkdep -f .depend -a -nostdinc -DNVLAN=0 -D_KERNEL
-DKLD_MODULE -I- -I. -I@ -I@/../include
-I/usr/obj/usr/src/i386/usr/include
/usr/src/sys/modules/if_vlan/../../net/if_vlan.c
===> iir
@ -> /usr/src/sys
machine -> /usr/src/sys/i386/include
touch opt_scsi.h
touch opt_cam.h
perl @/kern/makeops.pl -h @/kern/device_if.m
perl @/kern/makeops.pl -h @/kern/bus_if.m
perl @/kern/makeops.pl -h @/pci/pci_if.m
rm -f .depend
mkdep -f .depend -a -nostdinc -D_KERNEL -DKLD_MODULE
-I- -I. -I@ -I@/../include
-I/usr/obj/usr/src/i386/usr/include
/usr/src/sys/modules/iir/../../dev/iir/iir.c
/usr/src/sys/modules/iir/../../dev/iir/iir_ctrl.c
/usr/src/sys/modules/iir/../../dev/iir/iir_pci.c
*** Error code 1

Stop in /usr/src/sys/modules/iir.
*** Error code 1

Stop in /usr/src/sys/modules.
*** Error code 1

Stop in /usr/obj/usr/src/sys/MYKERNEL.
*** Error code 1

Stop in /usr/src.
*** Error code 1

Stop in /usr/src.

My Kernel configuration file MYKERNEL is:

# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.59
2004/04/07 20:29:01 vkashyap Exp $

machine i386
cpu I686_CPU
ident MYKERNEL
maxusers 0

#makeoptions DEBUG=-g #Build kernel with gdb(1) debug
symbols

#options MATH_EMULATE #Support for x87 emulation
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options SOFTUPDATES #Enable FFS soft updates support
options UFS_DIRHASH #Improve performance on big
directories
options MFS #Memory Filesystem
options MD_ROOT #MD is a potential root device
options NFS #Network Filesystem
options NFS_ROOT #NFS usable as root device, NFS
required
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660
required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
#options SCSI_DELAY=15000 #Delay (in ms) before
probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time
extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=10
#To hide firewall from traceroute
options IPSTEALTH
options IPFIREWALL_FORWARD
options RANDOM_IP_ID
#To add web server support
options ACCEPT_FILTER_DATA
options ACCEPT_FILTER_HTTP
options KBD_INSTALL_CDEV # install a CDEV entry in
/dev
options AHC_REG_PRETTY_PRINT # Print register
bitfields in debug
                                        # output. Adds ~128k to driver.
options AHD_REG_PRETTY_PRINT # Print register
bitfields in debug
                                        # output. Adds ~215k to driver.

# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O

device isa
device eisa
device pci

# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
#device fd1 at fdc0 drive 1
#
# If you have a Toshiba Libretto with its Y-E Data
PCMCIA floppy,
# don't use the above line for fdc0 but the following
one:
#device fdc0

# ATA and ATAPI devices
#device ata0 at isa? port IO_WD1 irq 14
#device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering

# SCSI Controllers
#device ahb # EISA AHA1742 family
#device ahc # AHA2940 and onboard AIC7xxx devices
#device ahd # AHA39320/29320 and onboard AIC79xx
devices
#device amd # AMD 53C974 (Tekram DC-390(T))
#device isp # Qlogic family
#device mpt # LSI-Logic MPT/Fusion
#device ncr # NCR/Symbios Logic
#device sym # NCR/Symbios Logic (newer chipsets)
#options SYM_SETUP_LP_PROBE_MAP=0x40
                                # Allow ncr to attach legacy NCR devices when
                                # both sym and ncr are configured

# SCSI peripherals

# RAID controllers interfaced to the SCSI subsystem
#device asr # DPT SmartRAID V, VI and Adaptec SCSI
RAID
#device dpt # DPT Smartcache - See LINT for options!
#device iir # Intel Integrated RAID
#device mly # Mylex AcceleRAID/eXtremeRAID
#device ciss # Compaq SmartRAID 5* series
#device twa # 3ware 9000 series PATA/SATA RAID

# RAID controllers
#device aac # Adaptec FSA RAID, Dell PERC2/PERC3
#device aacp # SCSI passthrough for aac (requires
CAM)
#device ida # Compaq Smart RAID
#device amr # AMI MegaRAID
#device mlx # Mylex DAC960 family
#device pst # Promise Supertrak SX6000
#device twe # 3ware Escalade

# atkbdc0 controls both the keyboard and the PS/2
mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12

device vga0 at isa?

# splash screen/screen saver
pseudo-device splash

# syscons is the default console driver, resembling an
SCO console
device sc0 at isa? flags 0x100

# Enable this and PCVT_FREEBSD for pcvt vt220
compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt
console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with
the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std

device agp # support several AGP chipsets

# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device apm0 at nexus? disable flags 0x20 # Advanced
Power Management

# PCCARD (PCMCIA) support
device card
device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000
disable

# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
device sio2 at isa? disable port IO_COM3 irq 5
device sio3 at isa? disable port IO_COM4 irq 9

# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da

# PCI Ethernet NICs.
#device de # DEC/Intel DC21x4x (``Tulip'')
#device em # Intel PRO/1000 adapter Gigabit Ethernet
Card (``Wiseman'')
#device txp # 3Com 3cR990 (``Typhoon'')
#device vx # 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus
controller code.
# NOTE: Be sure to keep the 'device miibus' line in
order to use these NICs!
device miibus # MII bus support
#device dc # DEC/Intel 21143 and various workalikes
device fxp # Intel EtherExpress PRO/100B (82557,
82558)
#device pcn # AMD Am79C97x PCI 10/100 NICs
#device rl # RealTek 8129/8139
#device sf # Adaptec AIC-6915 (``Starfire'')
#device sis # Silicon Integrated Systems SiS 900/SiS
7016
#device ste # Sundance ST201 (D-Link DFE-550TX)
#device tl # Texas Instruments ThunderLAN
#device tx # SMC EtherPower II (83c170 ``EPIC'')
#device vr # VIA Rhine, Rhine II
#device wb # Winbond W89C840F
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
#device bge # Broadcom BCM570x (``Tigon III'')

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
#device ed0 at isa? disable port 0x280 irq 10 iomem
0xd8000
#device ex
#device ep
#device fe0 at isa? disable port 0x300
# Xircom Ethernet
#device xe
# PRISM I IEEE 802.11b wireless NIC.
#device awi
# WaveLAN/IEEE 802.11 wireless NICs. Note: the
WaveLAN/IEEE really
# exists only as a PCMCIA device, so there is no ISA
attachment needed
# and resources will always be dynamically assigned by
the pccard code.
#device wi
# Aironet 4500/4800 802.11 wireless NICs. Note: the
declaration below will
# work for PCMCIA and PCI cards, as well as ISA cards
set to ISA PnP
# mode (the factory default). If you set the switches
on your ISA
# card for a manually chosen I/O address and IRQ, you
must specify
# those parameters here.
#device an
# The probe order of these is presently determined by
i386/isa/isa_compat.c.
#device ie0 at isa? disable port 0x300 irq 10 iomem
0xd0000
#device le0 at isa? disable port 0x300 irq 5 iomem
0xd0000
#device lnc0 at isa? disable port 0x280 irq 10 drq 0
#device cs0 at isa? disable port 0x300
#device sn0 at isa? disable port 0x300 irq 10

# Pseudo devices - the number indicates how many units
to allocate.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying
(translation)

# The `bpf' pseudo-device enables the Berkeley Packet
Filter.
# Be aware of the administrative consequences of
enabling this!
pseudo-device bpf #Berkeley packet filter

# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
device ukbd # Keyboard
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus
and da
device ums # Mouse
device uscanner # Scanners
device urio # Diamond Rio MP3 Player
# USB Ethernet, requires mii
device aue # ADMtek USB ethernet
device cue # CATC USB ethernet
device kue # Kawasaki LSI USB ethernet

# FireWire support
device firewire # FireWire bus code
device sbp # SCSI over FireWire (Requires scbus and
da)
device fwe # Ethernet over FireWire (non-standard!)

Can anyone advice me what to do? I've tried to do a
sysinstall to put all the sources in the src-sys
directory but that didn't help. I activated the iir
device agian in my kernel configuration file, but also
the same error message. Pls help because I want to add
IPFIREWALL support in my kernel before going on the
internet with this laptop. I use freebsd version 4.10.

Thanks in advance

                
__________________________________
Do you Yahoo!?
New and Improved Yahoo! Mail - Send 10MB messages!
http://promotions.yahoo.com/new_mail
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

• Previous message: Siddhartha Jain: "Bandwidth shaping for different flows"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]