Re: make fails on device iir on freebsd 4.10

From: Dino Vliet (dino_vliet_at_yahoo.com)
Date: 08/19/04

  • Next message: Lowell Gilbert: "Re: Problem" 
    Date: Thu, 19 Aug 2004 07:16:37 -0700 (PDT)
To: adam <antadam@spymac.com>, freebsd-questions@freebsd.org

    If Generic compiles, then my file would compile too
    because I only copied Generic and comment out iir.
    Then I got that message.

    Now I tried to work with an even smaller version of
    the file and removed and uncommented a lot, but still
    I get the same error (and look at my new configuration
    file below error message):

    >===> iir
    > >@ -> /usr/src/sys
    > >machine -> /usr/src/sys/i386/include
    > >touch opt_scsi.h
    > >touch opt_cam.h
    > >perl @/kern/makeops.pl -h @/kern/device_if.m
    > >perl @/kern/makeops.pl -h @/kern/bus_if.m
    > >perl @/kern/makeops.pl -h @/pci/pci_if.m
    > >rm -f .depend
    > >mkdep -f .depend -a -nostdinc -D_KERNEL
    > -DKLD_MODULE
    > >-I- -I. -I@ -I@/../include
    > >-I/usr/obj/usr/src/i386/usr/include
    > >/usr/src/sys/modules/iir/../../dev/iir/iir.c
    > >/usr/src/sys/modules/iir/../../dev/iir/iir_ctrl.c
    > >/usr/src/sys/modules/iir/../../dev/iir/iir_pci.c
    > >*** Error code 1
    > >
    > >Stop in /usr/src/sys/modules/iir.
    > >*** Error code 1
    > >
    > >Stop in /usr/src/sys/modules.
    > >*** Error code 1
    > >
    > >Stop in /usr/obj/usr/src/sys/MIJNKERNEL.
    > >*** Error code 1
    > >
    > >Stop in /usr/src.
    > >*** Error code 1

    My configuration file is now:

    #
    # GENERIC -- Generic kernel configuration file for
    FreeBSD/i386
    #
    # For more information on this file, please read the
    handbook section on
    # Kernel Configuration Files:
    #
    #
    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
    #
    # The handbook is also available locally in
    /usr/share/doc/handbook
    # if you've installed the doc distribution, otherwise
    always see the
    # FreeBSD World Wide Web server
    (http://www.FreeBSD.org/) for the
    # latest information.
    #
    # An exhaustive list of options and more detailed
    explanations of the
    # device lines is also present in the ./LINT
    configuration file. If you are
    # in doubt as to the purpose or necessity of a line,
    check first in LINT.
    #
    # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.246.2.59
    2004/04/07 20:29:01 vkashyap Exp $

    machine i386
    cpu I686_CPU
    ident MYKERNEL
    maxusers 0

    #makeoptions DEBUG=-g #Build kernel with gdb(1) debug
    symbols

    options MATH_EMULATE #Support for x87 emulation
    options INET #InterNETworking
    options INET6 #IPv6 communications protocols
    options FFS #Berkeley Fast Filesystem
    options FFS_ROOT #FFS usable as root device [keep
    this!]
    options SOFTUPDATES #Enable FFS soft updates support
    options UFS_DIRHASH #Improve performance on big
    directories
    options MFS #Memory Filesystem
    options MD_ROOT #MD is a potential root device
    #options NFS #Network Filesystem
    #options NFS_ROOT #NFS usable as root device, NFS
    required
    #options MSDOSFS #MSDOS Filesystem
    options CD9660 #ISO 9660 Filesystem
    options CD9660_ROOT #CD-ROM usable as root, CD9660
    required
    options PROCFS #Process filesystem
    options COMPAT_43 #Compatible with BSD 4.3 [KEEP
    THIS!]
    options SCSI_DELAY=15000 #Delay (in ms) before
    probing SCSI
    options UCONSOLE #Allow users to grab the console
    options USERCONFIG #boot -c editor
    options VISUAL_USERCONFIG #visual boot -c editor
    options KTRACE #ktrace(1) support
    options SYSVSHM #SYSV-style shared memory
    options SYSVMSG #SYSV-style message queues
    options SYSVSEM #SYSV-style semaphores
    options P1003_1B #Posix P1003_1B real-time
    extensions
    options _KPOSIX_PRIORITY_SCHEDULING
    options ICMP_BANDLIM #Rate limit bad replies
    options KBD_INSTALL_CDEV # install a CDEV entry in
    /dev
    options AHC_REG_PRETTY_PRINT # Print register
    bitfields in debug
                                            # output. Adds ~128k to driver.
    options AHD_REG_PRETTY_PRINT # Print register
    bitfields in debug
                                            # output. Adds ~215k to driver.

    # To make an SMP kernel, the next two are needed
    #options SMP # Symmetric MultiProcessor Kernel
    #options APIC_IO # Symmetric (APIC) I/O

    device isa
    device eisa
    device pci

    # Floppy drives
    device fdc0 at isa? port IO_FD1 irq 6 drq 2
    device fd0 at fdc0 drive 0
    device fd1 at fdc0 drive 1
    #
    # If you have a Toshiba Libretto with its Y-E Data
    PCMCIA floppy,
    # don't use the above line for fdc0 but the following
    one:
    #device fdc0

    # ATA and ATAPI devices
    device ata0 at isa? port IO_WD1 irq 14
    device ata1 at isa? port IO_WD2 irq 15
    device ata
    device atadisk # ATA disk drives
    device atapicd # ATAPI CDROM drives
    device atapifd # ATAPI floppy drives
    device atapist # ATAPI tape drives
    options ATA_STATIC_ID #Static device numbering

    # atkbdc0 controls both the keyboard and the PS/2
    mouse
    device atkbdc0 at isa? port IO_KBD
    device atkbd0 at atkbdc? irq 1 flags 0x1
    device psm0 at atkbdc? irq 12

    device vga0 at isa?

    # splash screen/screen saver
    pseudo-device splash

    # syscons is the default console driver, resembling an
    SCO console
    device sc0 at isa? flags 0x100

    # Enable this and PCVT_FREEBSD for pcvt vt220
    compatible console driver
    #device vt0 at isa?
    #options XSERVER # support for X server on a vt
    console
    #options FAT_CURSOR # start with block cursor
    # If you have a ThinkPAD, uncomment this along with
    the rest of the PCVT lines
    #options PCVT_SCANSET=2 # IBM keyboards are non-std

    device agp # support several AGP chipsets

    # Floating point support - do not disable.
    device npx0 at nexus? port IO_NPX irq 13

    # Power management support (see LINT for more options)
    device apm0 at nexus? disable flags 0x20 # Advanced
    Power Management

    # PCCARD (PCMCIA) support
    device card
    device pcic0 at isa? irq 0 port 0x3e0 iomem 0xd0000
    device pcic1 at isa? irq 0 port 0x3e2 iomem 0xd4000
    disable

    # Serial (COM) ports
    device sio0 at isa? port IO_COM1 flags 0x10 irq 4
    device sio1 at isa? port IO_COM2 irq 3
    device sio2 at isa? disable port IO_COM3 irq 5
    device sio3 at isa? disable port IO_COM4 irq 9

    # Parallel port
    device ppc0 at isa? irq 7
    device ppbus # Parallel port bus (required)
    device lpt # Printer
    device plip # TCP/IP over parallel
    device ppi # Parallel port interface device
    #device vpo # Requires scbus and da

    # PCI Ethernet NICs that use the common MII bus
    controller code.
    # NOTE: Be sure to keep the 'device miibus' line in
    order to use these NICs!
    device miibus # MII bus support
    device dc # DEC/Intel 21143 and various workalikes
    device fxp # Intel EtherExpress PRO/100B (82557,
    82558

    # ISA Ethernet NICs.
    # 'device ed' requires 'device miibus'
    device ed0 at isa? disable port 0x280 irq 10 iomem
    0xd8000
    device ex
    device ep
    device fe0 at isa? disable port 0x300
    # Xircom Ethernet
    device xe
    # PRISM I IEEE 802.11b wireless NIC.
    device awi
    # WaveLAN/IEEE 802.11 wireless NICs. Note: the
    WaveLAN/IEEE really
    # exists only as a PCMCIA device, so there is no ISA
    attachment needed
    # and resources will always be dynamically assigned by
    the pccard code.
    device wi
    # Aironet 4500/4800 802.11 wireless NICs. Note: the
    declaration below will
    # work for PCMCIA and PCI cards, as well as ISA cards
    set to ISA PnP
    # mode (the factory default). If you set the switches
    on your ISA
    # card for a manually chosen I/O address and IRQ, you
    must specify
    # those parameters here.
    device an
    # The probe order of these is presently determined by
    i386/isa/isa_compat.c.
    device ie0 at isa? disable port 0x300 irq 10 iomem
    0xd0000
    #device le0 at isa? disable port 0x300 irq 5 iomem
    0xd0000
    device lnc0 at isa? disable port 0x280 irq 10 drq 0
    device cs0 at isa? disable port 0x300
    device sn0 at isa? disable port 0x300 irq 10

    # Pseudo devices - the number indicates how many units
    to allocate.
    pseudo-device loop # Network loopback
    pseudo-device ether # Ethernet support
    pseudo-device sl 1 # Kernel SLIP
    pseudo-device ppp 1 # Kernel PPP
    pseudo-device tun # Packet tunnel.
    pseudo-device pty # Pseudo-ttys (telnet etc)
    pseudo-device md # Memory "disks"
    pseudo-device gif # IPv6 and IPv4 tunneling
    pseudo-device faith 1 # IPv6-to-IPv4 relaying
    (translation)

    # The `bpf' pseudo-device enables the Berkeley Packet
    Filter.
    # Be aware of the administrative consequences of
    enabling this!
    pseudo-device bpf #Berkeley packet filter

    # USB support
    device uhci # UHCI PCI->USB interface
    device ohci # OHCI PCI->USB interface
    device usb # USB Bus (required)
    device ugen # Generic
    device uhid # "Human Interface Devices"
    device ukbd # Keyboard
    device ulpt # Printer
    device umass # Disks/Mass storage - Requires scbus
    and da
    device ums # Mouse
    device uscanner # Scanners
    device urio # Diamond Rio MP3 Player
    # USB Ethernet, requires mii
    device aue # ADMtek USB ethernet
    device cue # CATC USB ethernet
    device kue # Kawasaki LSI USB ethernet

    # FireWire support
    device firewire # FireWire bus code
    device sbp # SCSI over FireWire (Requires scbus and
    da)
    device fwe # Ethernet over FireWire (non-standard!)
    --- adam <antadam@spymac.com> wrote:

    > I just took a quick glance at your file, but will
    > this compile if you
    > uncomment iir??? You certainly have a lot of things
    > included in your
    > config file. Re-enabling some options will help you
    > narrow down whether
    > or not the problem is in fact the iir being
    > commented out or whether
    > something that depends on iir isn't commented out.
    > Sorry for the
    > jumbled wording, I haven't had my coffee yet.
    >
    > Adam
    >
    > Dino Vliet wrote:
    >
    > >I want to compile a new kernel on my laptop running
    > >freebsd 4.10.
    > >
    > >Although I commented out device iir in my kernel
    > >configuration file, I still get an error message
    > when
    > >trying to make my kernel. Look at my kernel
    > >configuration file which I attached to this
    > message.
    > >
    > >Can somebody help me to get this fixed?
    > >
    > >Brgds
    > >
    > >I'm getting this error message:
    > >
    > >===> iir
    > >@ -> /usr/src/sys
    > >machine -> /usr/src/sys/i386/include
    > >touch opt_scsi.h
    > >touch opt_cam.h
    > >perl @/kern/makeops.pl -h @/kern/device_if.m
    > >perl @/kern/makeops.pl -h @/kern/bus_if.m
    > >perl @/kern/makeops.pl -h @/pci/pci_if.m
    > >rm -f .depend
    > >mkdep -f .depend -a -nostdinc -D_KERNEL
    > -DKLD_MODULE
    > >-I- -I. -I@ -I@/../include
    > >-I/usr/obj/usr/src/i386/usr/include
    > >/usr/src/sys/modules/iir/../../dev/iir/iir.c
    > >/usr/src/sys/modules/iir/../../dev/iir/iir_ctrl.c
    > >/usr/src/sys/modules/iir/../../dev/iir/iir_pci.c
    > >*** Error code 1
    > >
    > >Stop in /usr/src/sys/modules/iir.
    > >*** Error code 1
    > >
    > >Stop in /usr/src/sys/modules.
    > >*** Error code 1
    > >
    > >Stop in /usr/obj/usr/src/sys/MIJNKERNEL.
    > >*** Error code 1
    > >
    > >Stop in /usr/src.
    > >*** Error code 1
    > >
    > >
    > >
    > >
    > >
    > >__________________________________
    > >Do you Yahoo!?
    > >Yahoo! Mail Address AutoComplete - You start. We
    > finish.
    > >http://promotions.yahoo.com/new_mail
    > >
    >
    >------------------------------------------------------------------------
    > >
    > >_______________________________________________
    > >freebsd-questions@freebsd.org mailing list
    >
    >http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    > >To unsubscribe, send any mail to
    > "freebsd-questions-unsubscribe@freebsd.org"
    > >
    > >
    >
    >
    > --
    > www.erictheninja.org
    > A bunch of crap, but it'll be there soon
    >
    > Buy my ebay stuff...you know you want to
    >
    http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=biddingman12&include=0&since=-1&sort=3&rows=50
    >
    >

                    
    _______________________________
    Do you Yahoo!?
    Win 1 of 4,000 free domain names from Yahoo! Enter now.
    http://promotions.yahoo.com/goldrush
    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

  • Next message: Lowell Gilbert: "Re: Problem"

    Relevant Pages

    • Re: Howto compile a kernel from scratch
      ... > I want to compile a kernel on my own and would like to know how to do ... determine which features you want to include/exclude. ... By-all-means, use your current configuration file, probably called ...
      (comp.os.linux.setup)
    • Re: kernel recompile in woody
      ... since i can get the configuration file from /boot, ... > and tried to compile it but it wouldn't compile. ... the kernel headers are a subset of the kernel source. ... "Theoretical politics is interesting. ...
      (Debian-User)
    • Re: Kernel configuration could not be read?
      ... btw, the configuration file is a file that tells the kernel compilation ... compile as modules, etc. Take a brief look at "/boot/config[your kernel ...
      (Debian-User)
    • Re: make fails on device iir on freebsd 4.10
      ... or not the problem is in fact the iir being commented out or whether ... >trying to make my kernel. ... >configuration file which I attached to this message. ... >I'm getting this error message: ...
      (freebsd-questions)
    • kernel recompile in woody
      ... since i can get the configuration file from /boot, ... need is the kernel source. ... and tried to compile it but it wouldn't compile. ...
      (Debian-User)