Ok,status"

From: bsdfsse (bsdfsse_at_optonline.net)
Date: 09/30/04

  • Next message: bsdfsse: "Re: Ok, this is bad"
    Date: Wed, 29 Sep 2004 23:28:34 -0400
    To: questions@FreeBSD.ORG
    
    

    I solved these DMA problems on my server by replacing my ASUS
    motherboard's IDE controller with an Adaptec 1200A RAID controller
    (simply used as a different ATA controller).

    Now my workstation is getting a similar error. The machine is a 2
    year-old Compaq Presario 6024.

    What's up with 5.3-Beta6? Does it not work with regular Maxtor drives?

    I've been converting all my machines to FreeBSD, but I keep running in
    to these showstoppers.

    Any suggestions?

    thx!
    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"


  • Next message: bsdfsse: "Re: Ok, this is bad"

    Relevant Pages

    • Problem with Adaptec AHA-2940U2/U2W
      ... Controller Adaptec AHA-2940U2/U2W and running a Red Hat 9, ... Serial driver version 5.05c with MANY_PORTS MULTIPORT ... <Adaptec aic7890/91 Ultra2 SCSI adapter> ...
      (comp.os.linux.hardware)
    • Re: [2.4.31 + aic79xx] SCSI error: Infinite interrupt loop, INTSTAT = 0
      ... I just replaced the Adaptec 29320ALP controller with a LSI-22320 ... mptscsih driver is used for the external RAID subsystem. ... SCSI device sda: 143666192 512-byte hdwr sectors ...
      (Linux-Kernel)
    • Re: NEC B1 HC chokes with full BW USB2 ISO IN stream
      ... Adaptec card this NEC controller resides on. ... Adaptec has chosen to write their own drivers for some ...
      (microsoft.public.development.device.drivers)
    • Re: problems with later added DDS-2 tape-unit
      ... >> Adaptec 2940 UW controler, so I don't see a problem there either. ... >The 2940 bios can be set to auto-termination on the controller, ... That with termination is a very good idea, but after a reboot (albeit to ...
      (Fedora)
    • Re: Compaq (HP) and tapes
      ... > he Adaptec controller's they use on-board, ... which controller is installed, but is searching for the wrong code. ... More infuriating is the fact that the machine hangs at boot with SMP loaded, ... They said I could install a small PCI SCSI ...
      (comp.unix.sco.misc)