Re: DVD burner error

From: Edvard Fagerholm (efagerho_at_cc.hut.fi)
Date: 11/25/04

  • Next message: Rob: "Re: 5.3 on Intel 386 ?" 
    Date: Thu, 25 Nov 2004 10:19:51 +0200
To: "Andrew L. Gould" <algould@datawok.com>

    On Wed, Nov 24, 2004 at 05:24:36PM -0600, Andrew L. Gould wrote:
    > On Wednesday 24 November 2004 05:02 pm, Edvard Fagerholm wrote:
    > > On Wed, Nov 24, 2004 at 11:27:03PM +0200, Edvard Fagerholm wrote:
    > > > Hello!
    > > >
    > > > I get sometimes the following error when I burn DVDs. Actually it
    > > > happens more often than not... When burning a DVD with growisofs,
    > > > burning stops with the following message:
    > > >
    > > > acd0 WARNING - removed from configuration
    > > >
    > > > :-( unable to WRITE@LBA=fb150h: Input/output error
    > > >
    > > > builtin_dd: 1028432*2KB out @ average 3.5x1385KBps
    > > >
    > > > :-( write failed: Input/output error
    > > >
    > > > /dev/pass0: flushing cache
    > > > (cd0:ata1:0:0:0): lost device
    > > > (probe0:ata1:0:0:0): Lost target 0???
    > > >
    > > > :-( unable to FLUSH CACHE: Input/output error
    > > > :-( unable to SYNCHRONOUS FLUSH CACHE: Input/output error
    > > >
    > > > (cd0:ata1:0:0:0): removing device entry
    > > >
    > > > The funny thing is that this seems to be very file dependent. If I
    > > > create an ISO it might work fine and I can burn it many times with
    > > > no failures. However, some files always fail. With burncd I can
    > > > burn every file, but fixating doesn't work. The error message I get
    > > > with burncd is TEST_UNIT_READY Illegal request. I can get the exact
    > > > data later (i.e. the next time I want to destroy yet another DVD).
    > > >
    > > > My DVD drive is an LG GSA-4160B
    > > >
    > > > Regards,
    > > > Edvard
    > >
    > > Ok, I forgot to add that I'm running FreeBSD 5.3R. I also tried to
    > > use burncd to get the error message I mentioned in my earlier mail,
    > > but this time I got a kernel panic instead. I didn't see exactly what
    > > happened, but when I returned to the computer I saw this:
    > >
    > > burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured
    > > burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured
    > > burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured
    > > ...
    > > burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured
    > >
    > > Fatal trap 12: page fault while in kernel mode
    > > fault virtual address = 0x0
    > > fault code = supervisor read, page not present
    > > instruction pointer = 0x8:0xc0440470
    > > stack pointer = 0x10:0xd4030bfc
    > > frame pointer = 0x10:0xd4030c08
    > > code segment = base 0x0, limit 0xffff, type 0x1b
    > > = DPL 0, pres 1, def32 1, gran 1
    > > processor eflags = interrupt enabled, resume, IOPL = 0
    > > current process = 2 (g_event)
    > > trap number = 12
    > > panic: page fault
    > >
    > > I'm happy to provide extra information. I could look up the offending
    > > code with the kernel debugger tomorrow (it's 1AM, so I don't feel
    > > like it now).
    > >
    > > dmesg output as attachment.
    > >
    > > - edvard
    >
    > See the following links regarding burning cd's and dvd's. With a DVD
    > burner, you need to add atapicam to the your kernel. The use of
    > atapicam will also mean, however, that you will need to burn cd's using
    > cdrecord rather than burncd.
    >
    > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-cds.html
    > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-dvds.html
    >
    > Best of luck,
    >
    > Andrew Gould

    I have atapicam installed. If you check my previous mail, you'll see that I was
    using growisofs and all errors had something to do with /dev/cd0 and
    /dev/pass0. Those are the atapicam devices. I tried to use burncd, because
    atapicam burning was failing.

    I already read the handbook when I installed the dvd burner and it has no
    information that could be to any help regarding this problem.

    - edvard
    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

  • Next message: Rob: "Re: 5.3 on Intel 386 ?"