Re: DVD burner error

From: Andrew L. Gould (algould_at_datawok.com)
Date: 11/25/04

  • Next message: Doug Van Allen: "Xorg/Modes issue" 
    To: Edvard Fagerholm <efagerho@cc.hut.fi>
Date: Thu, 25 Nov 2004 10:55:26 -0600

    On Thursday 25 November 2004 02:19 am, Edvard Fagerholm wrote:
    > On Wed, Nov 24, 2004 at 05:24:36PM -0600, Andrew L. Gould wrote:
    > > On Wednesday 24 November 2004 05:02 pm, Edvard Fagerholm wrote:
    > > > On Wed, Nov 24, 2004 at 11:27:03PM +0200, Edvard Fagerholm wrote:
    > > > > Hello!
    > > > >
    > > > > I get sometimes the following error when I burn DVDs. Actually
    > > > > it happens more often than not... When burning a DVD with
    > > > > growisofs, burning stops with the following message:
    > > > >
    > > > > acd0 WARNING - removed from configuration
    > > > >
    > > > > :-( unable to WRITE@LBA=fb150h: Input/output error
    > > > >
    > > > > builtin_dd: 1028432*2KB out @ average 3.5x1385KBps
    > > > >
    > > > > :-( write failed: Input/output error
    > > > >
    > > > > /dev/pass0: flushing cache
    > > > > (cd0:ata1:0:0:0): lost device
    > > > > (probe0:ata1:0:0:0): Lost target 0???
    > > > >
    > > > > :-( unable to FLUSH CACHE: Input/output error
    > > > > :-( unable to SYNCHRONOUS FLUSH CACHE: Input/output error
    > > > >
    > > > > (cd0:ata1:0:0:0): removing device entry
    > > > >
    > > > > The funny thing is that this seems to be very file dependent.
    > > > > If I create an ISO it might work fine and I can burn it many
    > > > > times with no failures. However, some files always fail. With
    > > > > burncd I can burn every file, but fixating doesn't work. The
    > > > > error message I get with burncd is TEST_UNIT_READY Illegal
    > > > > request. I can get the exact data later (i.e. the next time I
    > > > > want to destroy yet another DVD).
    > > > >
    > > > > My DVD drive is an LG GSA-4160B
    > > > >
    > > > > Regards,
    > > > > Edvard
    > > >
    > > > Ok, I forgot to add that I'm running FreeBSD 5.3R. I also tried
    > > > to use burncd to get the error message I mentioned in my earlier
    > > > mail, but this time I got a kernel panic instead. I didn't see
    > > > exactly what happened, but when I returned to the computer I saw
    > > > this:
    > > >
    > > > burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured
    > > > burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured
    > > > burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured
    > > > ...
    > > > burncd: ioctl(CDRIOCSETBLOCKSIZE): Device not configured
    > > >
    > > > Fatal trap 12: page fault while in kernel mode
    > > > fault virtual address = 0x0
    > > > fault code = supervisor read, page not present
    > > > instruction pointer = 0x8:0xc0440470
    > > > stack pointer = 0x10:0xd4030bfc
    > > > frame pointer = 0x10:0xd4030c08
    > > > code segment = base 0x0, limit 0xffff, type 0x1b
    > > > = DPL 0, pres 1, def32 1, gran 1
    > > > processor eflags = interrupt enabled, resume, IOPL = 0
    > > > current process = 2 (g_event)
    > > > trap number = 12
    > > > panic: page fault
    > > >
    > > > I'm happy to provide extra information. I could look up the
    > > > offending code with the kernel debugger tomorrow (it's 1AM, so I
    > > > don't feel like it now).
    > > >
    > > > dmesg output as attachment.
    > > >
    > > > - edvard
    > >
    > > See the following links regarding burning cd's and dvd's. With a
    > > DVD burner, you need to add atapicam to the your kernel. The use
    > > of atapicam will also mean, however, that you will need to burn
    > > cd's using cdrecord rather than burncd.
    > >
    > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-
    > >cds.html
    > > http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/creating-
    > >dvds.html
    > >
    > > Best of luck,
    > >
    > > Andrew Gould
    >
    > I have atapicam installed. If you check my previous mail, you'll see
    > that I was using growisofs and all errors had something to do with
    > /dev/cd0 and /dev/pass0. Those are the atapicam devices. I tried to
    > use burncd, because atapicam burning was failing.
    >
    > I already read the handbook when I installed the dvd burner and it
    > has no information that could be to any help regarding this problem.
    >
    > - edvard

    What media are you using? I know that my Sony burner doesn't like
    Maxwell or Lite-On media; but works consistently well with Imation CD-R
    and DVD-R.

    Andrew
    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

  • Next message: Doug Van Allen: "Xorg/Modes issue"