Re: Wireless Card and SSID

From: RL (rlurman_at_gmail.com)
Date: 11/30/04

  • Next message: RL: "USB Flash Drive"
    Date: Tue, 30 Nov 2004 00:06:33 -0500
    To: freebsd-questions@freebsd.org
    
    

    On Tue, 30 Nov 2004 04:41:47 +0000, Peter Risdon
    <peter@circlesquared.com> wrote:
    > RL wrote:
    > > Sending again... I really need to solve this.
    > >
    > > I have a Netgear WAG511 PC Card and am using the ath driver. In my
    > > /etc/rc.conf I have ath0 to use DHCP and also I have:
    > > ifconfig_ath0="ssid myssid". Now, I can set this all up manually
    > > using ifconfig and it works till I reboot. When I set it in my rc.conf
    > > and I boot it up,
    >
    > You really need to copy here exactly what you put in rc.conf and exactly
    > what you type on the command line to set it up manually. From what
    > you've said it's possible to assume you have two ifconfig_ath0= lines in
    > rc.conf, and I don't think that would work. The latter would replace,
    > not augment, the former.
    >
    > I get "ath0: association failed (reason 12) for
    > > 00:0f:66:02..." flash on my screen one right after another. And when I
    > > do ifconfig, it shows no IP address NOR the ssid I set. For some
    > > reason it doesn't see the SSID or DHCP I set up in rc.conf.
    >
    > That doesn't follow.
    >
    > Peter.
    >
    > --
    >
    > the circle squared
    >
    > network systems and software
    >
    > http://www.circlesquared.com
    >

    I fixed it. I saw another reply on here that said to make a
    /etc/start_if.ath0 startup script. That worked great. I am not sure
    why that wasn't documented anywhere.
    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"


  • Next message: RL: "USB Flash Drive"

    Relevant Pages

    • eth0 fails on boot
      ... Fedora Core 2, Turbolinux, and an EXTREME failed attempt at Gentoo (need I ... the problem: eth0 fails on boot. ... Here is "ifconfig" directly after a boot: ... ...followed by ifdown eth0/ifup eth0 ...
      (alt.os.linux.suse)
    • RE: Newbie wirless install question
      ... after boot did it: ... ifconfig wi0 wepkey 0xwep ON ...
      (freebsd-questions)
    • Re: 2.6.19 and up to 2.6.20-rc2 Ethernet problems x86_64
      ... doesn't get configured, route -n says it's an Unsupported operation, ifconfig only shows for localhost, ifconfig eth0 192.168.10.5 also complains of a config error. ... If I boot an affected kernel with the SuSEfirewall2 enabled and then stop the firewall, ... Hamradio License G3VBV, Licensed Private Pilot ...
      (Linux-Kernel)
    • Cant add NIC
      ... I haven't been able to install a PCMCIA NIC. ... boot. ... It is listed in ifconfig. ... revolucionário cliente de e-mail do Opera: ...
      (comp.unix.bsd.freebsd.misc)
    • Re: e1000/ICH8LAN weirdness - no ethtool link until initially forced up
      ... Theodore Tso wrote: ... "ifconfig down" the device if it doesn't find a link. ... thanks to such applications on my desktop, I boot with e1000 ...
      (Linux-Kernel)