Re: Vanishing RAID?

From: Eric F Crist (ecrist_at_secure-computing.net)
Date: 12/29/04

  • Next message: Chandler May: "Re: Can't start up the FreeBSD install disk on dual Xeon Nocona rig (itworks on other systems)"
    Date: Tue, 28 Dec 2004 22:00:54 -0600
    To: "Subhro" <subhro.kar@gmail.com>
    
    
    

    On Dec 27, 2004, at 9:53 PM, Subhro wrote:

    > Hi folks,
    >
    > This is a strange problem. I own a AMD Athlon 64 bit on a Asus K8V SE
    > Deluxe
    > motherboard. This motherboard has an onboard VIA SATA RAID controller.
    > Two
    > SATA hard drives (120G each) are connected in RAID-0. The already has
    > an
    > installation of Windows XP (32 bit edition) and the RAID works
    > properly. It
    > shows a net hard disk space of ~240G as expected.
    >
    > I tried to install FreeBSD adm64 (5.3-R) from the CD. But I am really
    > surprised to see the installation utility detect the two hard disks
    > separately. The strangest part is, the first hard disk shows the
    > windows
    > partitions, however the second hard disk shows empty.
    >
    > To cross check I disconnected the second Hard disk from the controller
    > and
    > windows refused to boot as expected. Could anyone guide me about what
    > is
    > happening out there and how I can make the RAID controller work under
    > FreeBSD amd64?
    >
    > Regards
    > S.

    S,

    The VIA SATA RAID controller is not currently supported by FreeBSD.
    You *could* throw in a nice cheap IDE HDD for your FreeBSD purposes...

    HTH
    _______________________________________________________
    Eric F Crist "I am so smart, S.M.R.T!"
    Secure Computing Networks -Homer J Simpson

    
    



  • Next message: Chandler May: "Re: Can't start up the FreeBSD install disk on dual Xeon Nocona rig (itworks on other systems)"

    Relevant Pages

    • Read RAID1 drive member without 3ware RAID controller
      ... I got some file corruption errors under Windows on one workstation, "Incomplete drive" status reported by the RAID controller on another workstation running linux where I lost months of data because the RAID controller show the the host drive in June's state!! ... I would like to read this "incomplete" hard disk that 3ware RAID controller can't do anything of it. ... If it was RAID5, I would try anything because with parity, it would be too difficult to recover data, but with RAID1, it should be so complicated, I hope. ...
      (comp.periphs.scsi)
    • Re: What is Raid?
      ... RAID = Redundant Array of Inexpensive Disks ... can I use this extra IDE connector to connect my secondary hard disk? ... > the RAID controller the main hard disk or better ...
      (microsoft.public.windowsxp.hardware)
    • Re: Need some advice re; installation
      ... Did this "new" hard disk also work ok in Win98 ... Is your HDD connected to a RAID controller by any chance? ... appropriate driver and load it manually yourself. ...
      (alt.linux)
    • Re: Upgrading from a non-RAID to a hardware-RAID system (on RedHat 7.3) without formatting. Is it po
      ... > I have a RH7.3 installation on an IDE hard disk directly connected to ... Now I'm about to add an IDE RAID controller, ...
      (comp.os.linux.setup)
    • Re: Upgrading from a non-RAID to a hardware-RAID system (on RedHat 7.3) without formatting. Is it po
      ... > I have a RH7.3 installation on an IDE hard disk directly connected to ... Now I'm about to add an IDE RAID controller, ...
      (comp.os.linux.misc)