Re: Bootstrapping Raid 5 w/GEOM

From: Ivailo Tanusheff (i.tanusheff_at_procreditbank.bg)
Date: 07/22/05

  • Next message: Lei Sun: "only see cpu0 working after rebuilding kernel with SMP support"
    To: Norberto Meijome <freebsd@meijome.net>
    Date: Fri, 22 Jul 2005 10:10:40 +0300
    
    

    Norberto Meijome <freebsd@meijome.net>
    Sent by: owner-freebsd-questions@freebsd.org
    07/21/2005 03:41 PM

    To
    FreeBSD Questions <freebsd-questions@freebsd.org>
    cc

    Subject
    Re: Bootstrapping Raid 5 w/GEOM

    Michael Dale wrote:
    > Norberto Meijome wrote:
    >
    >> So, should I
    >> 1) Boot up with Disc 1, install minimal config, reboot
    >> 2) setup GEOM RAID 5 on all the discs ?
    >> 3) edit fstab to point to /dev/[what??]/[what else] instead of
    >> /ad0s1[abef] ?
    >>
    >
    > When I installed GEOM for a RAID 1 setup I did the following:
    >
    > Install FreeBSD on ad0
    > Boot CD and run fixit mode
    > Setup GEOM and change fstab to gm0
    >
    > Linky:
    > http://dannyman.toldme.com/2005/01/24/freebsd-howto-gmirror-system/

    Cheers Michael - that's a great bit of info. Do you know how to do RAID5 ?
    I read in

    http://www.essenz.com/support/lists/hackers/20040118/69.html

    about geom_raid, but it seems to be lost after that.

    The other alternative may be to setup a RAID1+0, but that shrinks my
    usable space, and I'm not sure how reliable/advisable it is to do in
    software.

    Thanks again,
    Beto

    It's not possible to use RAID 5 for bootable slice, so I would suggest:
    - Create a mirrored slice for the root FS
    - Create a RAID 5 slice for the other FS

    I did the same here with vinum. Also as you have 3 disks you can make a 3
    disks mirror for the boot slice. The other option is to make mirror on 2
    disks and on third to put swap :)

    Best regards,

    Ivailo Tanusheff
    Senior System administrator
    ProCredit Bank (Bulgaria) AD

    tel. +359 2 921 7161
    fax +359 2 921 7110
    http://www.procreditbank.bg

    Disclaimer: The information contained in this message is intended solely
    for the use of individual or entity to whom it is addressed and other
    authorized to receive it. It may contain confidential or legally
    privileged information. If you are not the intended recipient you are
    hereby notified that any disclosure, copying, distribution or taking any
    action in reliance on the contents of this message is strictly prohibited
    and may be unlawful. If you have received this communication in error,
    please notify us immediately by responding to this email and then delete
    it from your system. ProCredit Bank is neither liable for the proper and
    complete transmission of the information contained in this message nor for
    any delay in its receipt.
    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"


  • Next message: Lei Sun: "only see cpu0 working after rebuilding kernel with SMP support"

    Relevant Pages

    • Re: hardware mirrors recognized as individual disks in fbsd
      ... suddenly I have 4 disks whereas in windows I had two. ... ASUS P5DR1-VM motherboard with a ULI raid chipset onboard. ... You can't write NTFS in FreeBSD anyway - or couldn't the last I knew. ... when they think they should be on slice 1 ...
      (freebsd-questions)
    • Re: scsi raid geometry high-point rocketraid 1640
      ... FDISK says that the geometry is 145923/255/63 and it is incorrect. ... That is the missing link, the raid controller says 1200 GB if recalculated, ... WIth 4 disks it is 25% as 4th disk make the redundancy. ... fdisk that makes one slice of the entire device, ...
      (freebsd-questions)
    • Replica database queries - Newbie
      ... I have added 1 replicas in each of the 4 disks and the output is as follows: ... The RAID 5 volume has ... already been created by using slice 2 of the disks. ...
      (comp.unix.solaris)
    • Re: DC RAID Configuration
      ... If the machine has 6 spindles then OS/Logs go on a hardware mirror, if 10 then they go on a 4 disk hardware based 0+1 RAID. ... Their DIT is only in the teens in size so the disks themselves could be small, you just need many to get the high IOPS that make AD really run smoothly. ... 30 DCs with 2500 users total, unless the environment had a lot of very heavy use AD apps I would likely be ok for even a single mirror for those DCs. ...
      (microsoft.public.win2000.active_directory)
    • Re: ASUS P4C800 Deluxe & SATA-2 drives?
      ... > "The P4C800 Deluxe offers the most complete RAID solution. ... A Promise SATA ... transfer bandwidth to be increased according to the number of disks used. ...
      (alt.comp.periphs.mainboard.asus)