Re: 3ware 8506-4LP not working after os upgrade

From: Christiaan von Geldern (info_at_taxihosting.com)
Date: 08/25/05

  • Next message: Christiaan von Geldern: "help" 
    To: <freebsd-questions@freebsd.org>
Date: Thu, 25 Aug 2005 19:45:09 +0200

    -----Original Message-----
    From: Christiaan von Geldern [mailto:info@taxihosting.com]
    Sent: donderdag 25 augustus 2005 19:43
    To: 'freebsd-questions@freebsd.org'
    Subject: RE: 3ware 8506-4LP not working after os upgrade

    It isn't specified, like a lot of common raid controllers. But does it need
    to? It was supported correctly in 4.9 so why should that support disappear
    in 5.3? What was changed in twe it doesn't work anymore in 5.3. As
    mentioned, another model 3ware controller still works properly after the
    upgrade with the twe driver. And then there's still the question why it does
    work in safe mode...

    Christiaan

    -----Original Message-----
    From: Gayn Winters [mailto:gayn.winters@bristolsystems.com]
    Sent: donderdag 25 augustus 2005 19:16
    To: info@taxihosting.com
    Subject: RE: 3ware 8506-4LP not working after os upgrade

    > -----Original Message-----
    > From: owner-freebsd-questions@freebsd.org
    > [mailto:owner-freebsd-questions@freebsd.org] On Behalf Of
    > Christiaan von Geldern
    > Sent: Thursday, August 25, 2005 9:38 AM
    > To: freebsd-questions@freebsd.org
    > Subject: 3ware 8506-4LP not working after os upgrade

    > I'm having problems upgrading FreeBSD from 4.9 to 5.3. The
    > raid controller
    > did work flawless with the fresh 4.9 install. When booting
    > from the 5.3 mini
    > install iso the system hangs when the next step is mounting
    > the UFS root.
    > Safe mode boots without a problem. After upgrading to 5.3,
    > the system hangs
    > at the same point freezes the system so even a reset doesn't
    > help (need to
    > hard power down holding power button). I really need to power
    > down and even
    > after that loading the kernel sometimes freezes. Again,
    > booting in safe mode
    > is no problem at all. When booting the system loads the twe
    > driver and seems
    > to recognize the 4 port raid controller. Loading the old 4.9
    > kernel again
    > doesn't have the problem. Nothing is in the logs, probably because the
    > driver freezes before it can write anything at all.
    >
    >
    >
    > I've seen some little topics about similar problems, but the
    > symptoms and
    > hardware aren't totally equal. Besides, I can't find what solved their
    > problems (besides downgrading or changing hardware). I even
    > don't have the
    > resources to do that. My FreeBSD knowledge is not that really
    > big, but I do
    > know the basics.
    >
    >
    >
    > The system is a Supermicro case w/ P4SCT motherboard, 3ware
    > 8506-4LP raid
    > controller and 4x Maxtor DiamondMax 9 160GB SATA drive (3x
    > raid5, 1x hot
    > spare).
    >

    It looks like your controller is supported by the twe(4) driver.
    http://www.freebsd.org/releases/5.4R/hardware-i386.html#DISK

    Use man ata to check if the ata(4) driver supports it.

    -gayn

    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

  • Next message: Christiaan von Geldern: "help"