USB not working in 6.0-BETA5

From: Jared Kuolt (jkuolt_at_ipayone.com)
Date: 10/03/05

  • Next message: Subhro: "Re: How do you patch a driver?" 
    To: freebsd-questions@freebsd.org
Date: Sun, 02 Oct 2005 20:18:55 -0700

    FreeBSD-6.0 BETA5

    My USB does not work, as far as I can tell. When I was installing my USB
    mouse (Logitech MX300) did not work, I figured no big deal, so I used a
    USB->PS/2 adapter. Later I tried using my iPod, which worked okay in
    5.4REL, but I later gave that up. After two other devices, a camera and
    a printer that had both worked in 5.4REL, did not work in this release,
    I am now assuming USB is not working at all, and yes, all USB devices
    are enabled in my kernel.

    Here is part of my /var/log/messages showing some of my difficulties:

    ======= iPod Attempt =======
    Oct 2 19:35:54 Jared-Bwongar kernel: umass0: Apple iPod, rev 2.00/0.01,
    addr 2
    Oct 2 19:38:50 Jared-Bwongar kernel: umass0: BBB reset failed, STALLED
    Oct 2 19:38:50 Jared-Bwongar kernel: umass0: BBB bulk-in clear stall
    failed, STALLED
    Oct 2 19:38:50 Jared-Bwongar kernel: umass0: BBB bulk-out clear stall
    failed, STALLED
    Oct 2 19:38:50 Jared-Bwongar kernel: umass0: BBB reset failed, STALLED
    Oct 2 19:38:50 Jared-Bwongar kernel: umass0: BBB bulk-in clear stall
    failed, STALLED
    Oct 2 19:38:50 Jared-Bwongar kernel: umass0: BBB bulk-out clear stall
    failed, STALLED
    Oct 2 19:38:50 Jared-Bwongar kernel: umass0: BBB reset failed, STALLED
    Oct 2 19:38:50 Jared-Bwongar kernel: umass0: BBB bulk-in clear stall
    failed, STALLED
    Oct 2 19:38:50 Jared-Bwongar kernel: umass0: BBB bulk-out clear stall
    failed, STALLED
    Oct 2 19:38:50 Jared-Bwongar kernel: umass0: at uhub2 port 2 (addr 2)
    disconnected
    Oct 2 19:38:50 Jared-Bwongar kernel: umass0: detached

    ======= Printer Attempt =======
    Oct 2 19:39:26 Jared-Bwongar kernel: uhub1: port 1, set config at addr
    2 failed
    Oct 2 19:39:26 Jared-Bwongar kernel: uhub1: device problem (TIMEOUT),
    disabling port 1

    ======= Camera Attempt =======
    Oct 2 20:05:54 Jared-Bwongar kernel: uhub1: device problem
    (SET_ADDR_FAILED), disabling port 1

    ======= End of Messages =======

    Here is the result of 'usbdevs' with the camera plugged in:

    addr 1: UHCI root hub, VIA
    addr 1: UHCI root hub, VIA
     addr 0 should never happen!
    addr 1: UHCI root hub, VIA

    With each device 'camcontrol devlist' yields zero results.

    Motherboard information here:
    http://www.ecs.com.tw/ECSWeb/Products/ProductsDetail.aspx?DetailID=351&MenuID=26&LanID=9

    Thanks in advance to all that may be able to help!!

    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

  • Next message: Subhro: "Re: How do you patch a driver?"

    Relevant Pages