fxp0 problem with 6Beta?

From: Bdrawyah (bdrawyah_at_bdrawyah.plus.com)
Date: 10/05/05

  • Next message: Brian A. Seklecki: "Re: fxp0 problem with 6Beta?" 
    To: freebsd-questions@freebsd.org
Date: Wed, 05 Oct 2005 21:42:08 +0100
    ('binary' encoding is not supported, stored as-is) I have a small LAN at home consisting of 192.168.0.5 (a single PIII) which runs 5.4 stable and 192.168.
    0.7 (a dual PIII) which runs 6Beta4 connected with a Netgear router at 192.168.0.1.
    192.168.0.7 has nothing on it, no firewall even, aside from 6Beta (with debugging turned off in the
    kernel) and cvsup.
    >From 192.168.0.7 I can find and login to 192.168.0.5 and external computers using ssh.
    >From 192.168.0.5 I can login to external computers using ssh but there is no sign of 192.168.0.7,
    pinging fails and the Netgear router can't see it.
    Any suggestions?

    Below is dmesg for 192.168.0.7
    Copyright (c) 1992-2005 The FreeBSD Project.
    Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
            The Regents of the University of California. All rights reserved.
    FreeBSD 6.0-BETA4 #0: Sun Sep 11 16:48:29 BST 2005
        root@box7.bruce.net:/usr/obj/usr/src/sys/BOX7BRUCE
    Timecounter "i8254" frequency 1193182 Hz quality 0
    CPU: Intel Pentium III (731.02-MHz 686-class CPU)
      Origin = "GenuineIntel" Id = 0x683 Stepping = 3
      Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,
    FXSR,SSE>
    real memory = 536870912 (512 MB)
    avail memory = 515887104 (491 MB)
    MPTable: <COMPAQ Workstation >
    FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
     cpu0 (BSP): APIC ID: 1
     cpu1 (AP): APIC ID: 0
    ioapic0: Changing APIC ID to 8
    ioapic0: Assuming intbase of 0
    ioapic0 <Version 2.0> irqs 0-23 on motherboard
    npx0: [FAST]
    npx0: <math processor> on motherboard
    npx0: INT 16 interface
    cpu0 on motherboard
    cpu1 on motherboard
    pcib0: <MPTable Host-PCI bridge> pcibus 0 on motherboard
    pci0: <PCI bus> on pcib0
    agp0: <Intel 82840 host to AGP bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0
    pcib1: <MPTable PCI-PCI bridge> at device 1.0 on pci0
    pci1: <PCI bus> on pcib1
    pcib2: <MPTable PCI-PCI bridge> at device 30.0 on pci0
    pci2: <PCI bus> on pcib2
    fxp0: <Intel 82559 Pro/100 Ethernet> port 0x5400-0x543f mem 0xfdc00000-0xfdc00fff,0xfdd00000-0xfd
    dfffff irq 18 at device 2.0 on pci2
    miibus0: <MII bus> on fxp0
    inphy0: <i82555 10/100 media interface> on miibus0
    inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
    fxp0: Ethernet address: 00:02:a5:53:cb:3f
    ahc0: <Adaptec aic7892 Ultra160 SCSI adapter> port 0x5000-0x50ff mem 0xfde00000-0xfde00fff irq 19
     at device 7.0 on pci2
    ahc0: [GIANT-LOCKED]
    aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
    pci2: <display, VGA> at device 11.0 (no driver attached)
    isab0: <PCI-ISA bridge> at device 31.0 on pci0
    isa0: <ISA bus> on isab0
    atapci0: <Intel ICH UDMA66 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x6460-0x646f at
    device 31.1 on pci0
    ata0: <ATA channel 0> on atapci0
    ata1: <ATA channel 1> on atapci0
    uhci0: <Intel 82801AA (ICH) USB controller> port 0x6440-0x645f irq 19 at device 31.2 on pci0
    uhci0: [GIANT-LOCKED]
    usb0: <Intel 82801AA (ICH) USB controller> on uhci0
    usb0: USB revision 1.0
    uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
    uhub0: 2 ports with 2 removable, self powered
    pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
    pci0: <multimedia, audio> at device 31.5 (no driver attached)
    pmtimer0 on isa0
    orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc97ff,0xe0000-0xeffff on isa0
    atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
    atkbd0: <AT Keyboard> irq 1 on atkbdc0
    kbd0 at atkbd0
    atkbd0: [GIANT-LOCKED]
    psm0: <PS/2 Mouse> irq 12 on atkbdc0
    psm0: [GIANT-LOCKED]
    psm0: model IntelliMouse, device ID 3
    fdc0: <Enhanced floppy controller> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
    fdc0: [FAST]
    fd0: <1440-KB 3.5" drive> on fdc0 drive 0
    ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
    ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
    ppc0: FIFO with 16/16/13 bytes threshold
    ppbus0: <Parallel port bus> on ppc0
    plip0: <PLIP network interface> on ppbus0
    lpt0: <Printer> on ppbus0
    lpt0: Interrupt-driven port
    ppi0: <Parallel I/O> on ppbus0
    sc0: <System console> at flags 0x100 on isa0
    sc0: VGA <16 virtual consoles, flags=0x300>
    sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
    sio0: type 16550A
    sio1 at port 0x2f8-0x2ff irq 3 on isa0
    sio1: type 16550A
    vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
    unknown: <PNP0401> can't assign resources (port)
    unknown: <PNP0501> can't assign resources (port)
    unknown: <PNP0501> can't assign resources (port)
    unknown: <PNP0700> can't assign resources (port)
    unknown: <PNP0c01> can't assign resources (memory)
    unknown: <PNP0303> can't assign resources (port)
    unknown: <PNP0f13> can't assign resources (irq)
    Timecounters tick every 1.000 msec
    acd0: CDROM <Compaq CRD-8402B/1.01> at ata0-master PIO4
    Waiting 5 seconds for SCSI devices to settle
    da0 at ahc0 bus 0 target 0 lun 0
    da0: <COMPAQ BD00975CC6 HPB6> Fixed Direct Access SCSI-3 device
    da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing Enabled
    da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
    SMP: AP CPU #1 Launched!
    Trying to mount root from ufs:/dev/da0s1a

    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"

  • Next message: Brian A. Seklecki: "Re: fxp0 problem with 6Beta?"

    Relevant Pages