default routing question ZIPB ADSL PPPoA

From: Ahnjoan Amous (ahnjoan_at_gmail.com)
Date: 10/24/05

  • Next message: Mohsen Pahlevanzadeh: "an Iranian forum & power of BSD"
    Date: Sun, 23 Oct 2005 23:22:40 -0400
    To: freebsd-questions@freebsd.org
    
    
    

    The short : I believe the problem I am having is due to routing. A DHCP
    server sends me IP A.B.C.D with a default route of A.B.C.D. "dhclient" isn't
    handling this well and I don't know how to fix it. Windows as well as Linux
    DHCP clients do not have a problem with this and I am at my wits end trying
    to figure out what combination of route commands will fix my issue.

    The long : I have a CellPipe ADSL router/bridge from Lucent. This device is
    provided by our ISP. I am exploring the ZIPB functionality of the device to
    allow my FreeBSD host to own the public IP. The basics of the configuration
    for those unfamiliar is as follows. PPPoA is established by the device and
    the the (public) IP acquired through the previous process is delivered to a
    host behind that CellPipe via DHCP. After DHCP the device acts as a
    "bridge", allowing the internal device to use the public IP as its own. I'm
    sure this description is vague but I don't know any other way to explain.

    Info : After dhclient acquires its info the ethernet interface looks like
    this
    ifconfig ethernet interface – inet A.B.C.D netmask
    255.255.255.255<http://255.255.255.255/>

    When I connect a windows or Linux host they seem to treat the interface as
    the default route and work as expected. With FreeBSD I have tried removing
    all routes for the device after assignment, and then adding default route
    based on -interface flag for route command. I have also tried opening up the
    netmask on the ethernet interface and adding a default route destined for
    what I know the PPPoA connections end point is.

    Nothing I have tried seems to work. I don't consider myself an expert by any
    means but this is clearly beyond my knowledge.

    I'm happy to provide any information you need it you have an idea.

    Thanks

    Ahnjoan

    
    

    _______________________________________________
    freebsd-questions@freebsd.org mailing list
    http://lists.freebsd.org/mailman/listinfo/freebsd-questions
    To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"


  • Next message: Mohsen Pahlevanzadeh: "an Iranian forum & power of BSD"

    Relevant Pages

    • default routing question ZIPB ADSL PPPoA
      ... DHCP clients do not have a problem with this and I am at my wits end trying ... to figure out what combination of route commands will fix my issue. ... allow my FreeBSD host to own the public IP. ... After dhclient acquires its info the ethernet interface looks like ...
      (freebsd-questions)
    • Re: Automatically setiting mtu
      ... This would be ideal except, my interfaces section here is set to dhcp, ... >> this box is to delete the default route and use the route command to ... BOXNAME, which acts as a dhcp server, and gateway to the internet. ... This is a network of 5 home pc's all running XP Prof. and one debian ...
      (Debian-User)
    • Re: Cisco 2611, NAT, and Default Routes
      ... DHCP on one interface, figure out that the default gateway information ... The IOS DHCP client should install a default route that it obtains ... another tip - please don't use easily cracked passwords! ... If you must paste your config, it's good to use the "show tech- ...
      (comp.dcom.sys.cisco)
    • Re: Help w/ routing on Cisco 1841...
      ... router using 12.4 IOS software and am trying to get a connection going w/ ... my ISP over a cable modem connection.. ... router successfully making a DHCP request to the cable system and getting ... FastEthernet0/1 is the local-net) to route traffic back and forth.. ...
      (comp.dcom.sys.cisco)
    • Re: VPN Zugriff auf Zweitstandort
      ... der zuhause sitzt und sich per VPN über seinen DSL ... dieses ROUTE ADD über den DHCP ... Hilfe & Infos rund um den ISA Server: http://www.msisafaq.de ...
      (microsoft.public.de.german.isaserver)