Date: Tue, 29 Nov 2005 22:12:20 -0500
To: "Aaron P. Martinez" <ml@proficuous.com>
Aaron P. Martinez wrote:
> I am running FreeBSD 6.0-release and setting up a very basic firewall
> using pf on my workstation. The ruleset is as follows:
>
> block in log all
> pass quick on lo0 all
> #pass in on $ext_if proto tcp from any to $ext_if port 22 keep state
> pass out on fxp0 proto { tcp, udp, icmp } all keep state
Your firewall config is not enough to permit NFS to pass. You might
consider adding a "pass all" rule for machines on the local subnet.
[ Perhaps you should re-evaluate your network so that you do not attempt
to pass NFS through the firewall. If you have to do filesharing between
machines over an untrusted connection, should should consider a VPN or
SSH tunnel approach instead. ]
--
-Chuck
_______________________________________________
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@freebsd.org"
Re: Norton 2005 Int Security, Trend PCcillin or Zone Alarm ??????? ... > I want security I can run on both machines.... System overhead is higher than standard firewall applications.... Symantec products do not remove (uninstall) well. ... Micro Trends PC-Cillan is very good (possibly the best in home network... (alt.computer.security)
Re: Setting Up A WorkGroup for file and Share Printing ... Tried that amd could access only one of the two drives, the D drive, however ... I Turned off NIS 2008 firewall... I made sure the Registry setting "IRPStackSize" on both machines... Here are general network troubleshooting steps. ... (microsoft.public.windowsxp.network_web)
Re: Sharing a printer ... It may look daunting, but if you follow the steps at the links and suggestions below systematically and calmly, you will have no difficulty in setting up your sharing.... start by running the Network Setup Wizard on all machines. ... Problems sharing files between computers on a network are generally caused by 1) a misconfigured firewall; or 2) inadvertently running two firewalls such as the built-in Windows Firewall and a third-party firewall; and/or 3) not having identical user accounts and passwords on all Workgroup machines; 4) trying to create shares where the operating system does not permit it. ... (microsoft.public.windowsxp.network_web)
Re: Map drives between 2 XP SP2 machines... ... CheckPoint's VPN software has a Stateful Packet Inspection firewall, I believe, that is on, even when the VPN connection is not established. ...Doug Knox, MS-MVP Windows Media Center\Windows Powered Smart Display\Security ... > subnet) - But I still am not able to get an comminucation b/w the machines....MS-MVP Windows Media Center\Windows Powered Smart Display\Security ... (microsoft.public.windowsxp.security_admin)
Re: File sharing ... >>> firewall, but it doesn't work. ... >>> machines here this configuration works fine. ... I would also use telnet to try and access TCP port 139 and 445 on a machine that works correctly and one that does not to help determine if it is a network access or other problem. ... If the port is open you will see a blank command window with a blinking cursor like you will see if you run telnet 127.0.0.1 445 on your computer. ... (microsoft.public.windowsxp.security_admin)
