Re: hosts file

lars@xxxxxx wrote:
eoghan wrote:
nathaniel# ifconfig -a
fwe0: flags=108943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
options=8<VLAN_MTU>
inet6 fe80::11:6ff:fe99:d9eb%fwe0 prefixlen 64 scopeid 0x1
ether 02:11:06:99:d9:eb
ch 1 dma 0
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=9<RXCSUM,VLAN_MTU>
inet6 fe80::2b0:d0ff:fee7:e97d%xl0 prefixlen 64 scopeid 0x2
inet 192.168.1.34 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:b0:d0:e7:e9:7d
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
plip0: flags=108810<POINTOPOINT,SIMPLEX,MULTICAST,NEEDSGIANT> mtu 1500
lo0: flags=8008<LOOPBACK,MULTICAST> mtu 16384


The loopback setting is incomplete. Did you miss copy/pasting that?

Nope, that is the full output of ifconfig -a

Sorry again everyone for replying to your private mailboxes, I'm retarded.

eoghan, have you ever tried restarting your network?

Do so by executing /etc/netstart.

Thanks havent tried it but it does give me the network messages i was talking about:

devd already running? (pid=268).
Starting dhclient.
no such user: _dhcp, falling back to "nobody"
DHCPREQUEST on xl0 to 255.255.255.255 port 67
DHCPREQUEST on xl0 to 255.255.255.255 port 67
DHCPACK from 192.168.1.1
bound to 192.168.1.34 -- renewal in 129600 seconds.
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
options=9<RXCSUM,VLAN_MTU>
inet6 fe80::2b0:d0ff:fee7:e97d%xl0 prefixlen 64 scopeid 0x2
inet 192.168.1.34 netmask 0xffffff00 broadcast 192.168.1.255
ether 00:b0:d0:e7:e9:7d
media: Ethernet autoselect (100baseTX <full-duplex>)
status: active
route: writing to routing socket: Network is unreachable
add net ::ffff:0.0.0.0: gateway ::1: Network is unreachable
route: writing to routing socket: Network is unreachable
add net ::0.0.0.0: gateway ::1: Network is unreachable
net.inet6.ip6.forwarding: 0 -> 0
net.inet6.ip6.accept_rtadv: 1 -> 1
route: writing to routing socket: Network is unreachable
add net fe80::: gateway ::1: Network is unreachable
route: writing to routing socket: Network is unreachable
add net ff02::: gateway ::1: Network is unreachable
IPv4 mapped IPv6 address support=NO
Additional routing options:.

_______________________________________________
freebsd-questions@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: hosts file
    ... Thanks havent tried it but it does give me the network messages i was talking about: ... route: writing to routing socket: Network is unreachable ...
    (freebsd-questions)
  • inet variables
    ... Inet$Error: Route: writing to routing socket: No such process ... have been reported by the gui, or by Reporter. ...
    (comp.sys.acorn.networking)
  • Re: vimage-assigning interface to jail
    ... route to 192.168.x.x in your jail. ... route: writing to routing socket: Network is unreachable ... add net default: gateway 192.168.0.1: Network is unreachable ... I saw a reference to "accessing routing sockets in a FreeBSD jail is ...
    (freebsd-net)
  • Re: Bizzare routing table entry.
    ... route: writing to routing socket: No such process ... 0xc0a80132: Command not found. ...
    (freebsd-questions)
  • Re: Bizzare routing table entry.
    ... route: writing to routing socket: No such process ... 0xc0a80132: Command not found. ...
    (freebsd-questions)