raid 1 with gmirror && install loader on 2nd disk
- From: Petre Bandac <petre@xxxxxx>
- Date: Thu, 16 Mar 2006 21:33:45 +0200
I have installed a raid 1 system with gmirror and I want to have both
hard disks able to boot from, just in case
what are the steps in order to make /dev/ad2 bootable ?
(I am trying to prevent the following situation: one of the hdd fails
and I must boot from the last remaining, so I guess it should be
freebsd-questions@xxxxxxxxxxx mailing list
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@xxxxxxxxxxx"
- Re: dual boot with freebsd boot loader
... Petre Bandac wrote: ... > they were installed in the above order, so now I can use only freebsd ... > is there a way to configure freebsd's boot loader to be able to boot ... student at the Technische Universitšt Berlin ...
- Re: Debian machine not booting
... hard drives and added them. ... moved house and rebooted and now it doesn't boot. ... My 4 harddrives are organised in pairs of RAID 1 with LVM ... After doing what needs doing you can reboot to ...
- Re: Problems with software RAID on SATA
... Connected to this are two 320GB drives ... >>which I want to turn into a RAID1 array. ... >>I'm almost certain it's a problem with initting the RAID arrays at boot. ...
- Re: Sata drive problem
... faulty drive back into its original PC I did run a built in diagnostics ... checked the boot path without any errors. ... press Control N to enter raid setup. ... Available for Windows.. ...
- Re: Paul and Old Man: Cannot fix RAID5 failure ...
... I removed the drive reported in error, no boot or rebuild. ... I tried Universal Boot Disc but it won't load the RAID driver ... I was considering a parallel WinXP installation on a 4th disk, ... Maybe like in my case, actually 2 drives failed, while the RAID bios ROM ...