Re: Installing on IBM Z61t
- From: Jerry McAllister <jerrymc@xxxxxxxxxxxxxxxxx>
- Date: Mon, 21 Aug 2006 21:14:31 -0400 (EDT)
I would check that you have the IDE interface enabled that the CD plugs
into. Have you tried booting other bootable CD's like a WinXP CD just to
see if you get it to boot from CD.
I don't happen to have any other bootable CDs handy.
But, I was able to read CDs on that drive in XP.
They were just videos, etc.
They were not bootable, though, so I didn't attempt to boot with them.
////jerry
-Derek
At 05:20 PM 8/21/2006, Jerry McAllister wrote:
Hi All,
I am trying to set up a notebook computer for someone (I only have
towers and rackmount servers running FreeBSD myself).
The machine is an IBM Z61t Lenova with 2 GHz Intel CPU, 1 GB memory
The BIOS version is 1.06 (7FET46WW) of 2006-04-27
I has an: ATAPI CD0:MATSHITADVD-RAM UK-842-(PM) cd/dvd reader/burner.
I got a USB floppy and put it on too.
The boot order in BIOS is currently CD, Floppy Hard disk
I have switched floppy and CD a couple of times and removed
a number of other thing from the boot order - mostly things
that are not actually on the machine.
I was able to boot Partition Magic with the USB floppy and fix up
the hard disk to make room. I added a FAT32 (#3) slice and an
undesignated slice (#4). I hoped to add FreeBSD to the undesignated
slice and use the FAT32 for communication between WinXP and FreeBSD
since the XP slice was NTFS.
But, it will not boot the FreeBSD 6.1 installation CD - it completely
ignores it and boots WinXP, even though it looks like it is enabled
in the BIOS. It doesn't even seem to try booting the CD and fail.
The BIOS doesn't appear to talk to it at all.
That CD worked fine in another (deskside) machine - a Dell, by
the way. I had no trouble doing an install with it on that machine.
So, I made a set of 6.1 install floppies.
Although the Partition Magic (several years old copy) floppies booted
just fine, when I started to boot from the boot.flp floppy it read it
and then started repeatedly dumping some message on the screen. It
just kept scrolling up too fast to read. It looked like it might
be 5 or 6 lines long.
Just in case it was telling me to put in the kern1.flp, I did that
and hit enter, but it did not stop scrolling what appeared to be
the same message, nor did it appear to read that floppy at all.
I have rummaged through the BIOS setup and not found anything that
jumps out at me that I should turn on or off. I did not find
anything that looked like 'plug n play'.
So, my obvious question is: (questions are:)
Is there any hope of installing FreeBSD on this notebook computer?
Is there something I can turn on or off to make it work?
Why will the old Partition Magic floppy work, but the new FreeBSD 6.1 not?
Why doesn't the BIOS even attempt to check the CD for a boot sector,
but just ignore it completely and boot the HD?
Thanks for any clues or solid informatino,
////jerry
_______________________________________________
freebsd-questions@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@xxxxxxxxxxx"
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
MailScanner thanks transtec Computers for their support.
--=====================_11370770==.ALT
Content-Type: text/html; charset="us-ascii"
<html>
<body>
<font size=3>I would check that you have the IDE interface enabled that
the CD plugs into. Have you tried booting other bootable CD's like
a WinXP CD just to see if you get it to boot from CD.<br><br>
<x-tab> </x-tab>-Derek<br><br>
<br>
At 05:20 PM 8/21/2006, Jerry McAllister wrote:<br>
<blockquote type=cite class=cite cite>Hi All, <br><br>
I am trying to set up a notebook computer for someone (I only have<br>
towers and rackmount servers running FreeBSD myself).<br><br>
The machine is an IBM Z61t Lenova with 2 GHz Intel CPU, 1 GB memory<br>
The BIOS version is 1.06 (7FET46WW) of 2006-04-27<br><br>
I has an: ATAPI CD0:MATSHITADVD-RAM UK-842-(PM) cd/dvd
reader/burner.<br><br>
I got a USB floppy and put it on too.<br><br>
The boot order in BIOS is currently CD, Floppy Hard disk<br><br>
I have switched floppy and CD a couple of times and removed<br>
a number of other thing from the boot order - mostly things<br>
that are not actually on the machine.<br><br>
I was able to boot Partition Magic with the USB floppy and fix up <br>
the hard disk to make room. I added a FAT32 (#3) slice and an
<br>
undesignated slice (#4). I hoped to add FreeBSD to the
undesignated<br>
slice and use the FAT32 for communication between WinXP and FreeBSD<br>
since the XP slice was NTFS.<br><br>
But, it will not boot the FreeBSD 6.1 installation CD - it
completely<br>
ignores it and boots WinXP, even though it looks like it is enabled<br>
in the BIOS. It doesn't even seem to try booting the CD and
fail.<br>
The BIOS doesn't appear to talk to it at all.<br><br>
That CD worked fine in another (deskside) machine - a Dell, by<br>
the way. I had no trouble doing an install with it on that
machine.<br><br>
So, I made a set of 6.1 install floppies.<br>
Although the Partition Magic (several years old copy) floppies
booted<br>
just fine, when I started to boot from the boot.flp floppy it read
it<br>
and then started repeatedly dumping some message on the screen.
It<br>
just kept scrolling up too fast to read. It looked like it
might<br>
be 5 or 6 lines long. <br><br>
Just in case it was telling me to put in the kern1.flp, I did that<br>
and hit enter, but it did not stop scrolling what appeared to be<br>
the same message, nor did it appear to read that floppy at all.<br><br>
I have rummaged through the BIOS setup and not found anything that<br>
jumps out at me that I should turn on or off. I did not
find<br>
anything that looked like 'plug n play'.<br><br>
So, my obvious question is: (questions are:) <br>
Is there any hope of installing FreeBSD on this notebook computer?<br>
Is there something I can turn on or off to make it work?<br>
Why will the old Partition Magic floppy work, but the new FreeBSD 6.1
not?<br>
Why doesn't the BIOS even attempt to check the CD for a boot
sector,<br>
but just ignore it completely and boot the HD?<br><br>
Thanks for any clues or solid informatino,<br><br>
////jerry<br><br>
_______________________________________________<br>
freebsd-questions@xxxxxxxxxxx mailing list<br>
<a href="http://lists.freebsd.org/mailman/listinfo/freebsd-questions"; eudora="autourl">http://lists.freebsd.org/mailman/listinfo/freebsd-questions</a><br>
To unsubscribe, send any mail to
"freebsd-questions-unsubscribe@xxxxxxxxxxx"<br><br>
-- <br>
This message has been scanned for viruses and<br>
dangerous content by MailScanner, and is<br>
believed to be clean.<br>
MailScanner thanks transtec Computers for their
support.</font></blockquote></body>
<br />--
<br />This message has been scanned for viruses and
<br />dangerous content by
<a href="http://www.mailscanner.info/";><b>MailScanner</b></a>, and is
<br />believed to be clean.
<br />MailScanner thanks <a href="http://www.transtec.co.uk/";>transtec Computers</a> for their support.
</html>
--=====================_11370770==.ALT--
_______________________________________________
freebsd-questions@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@xxxxxxxxxxx"
- Follow-Ups:
- Re: Installing on IBM Z61t
- From: Derek Ragona
- Re: Installing on IBM Z61t
- References:
- Re: Installing on IBM Z61t
- From: Derek Ragona
- Re: Installing on IBM Z61t
- Prev by Date: Re: a problem setting screen resolution with Xorg-6.9.0
- Next by Date: Re: Installing on IBM Z61t
- Previous by thread: Re: Installing on IBM Z61t
- Next by thread: Re: Installing on IBM Z61t
- Index(es):
Relevant Pages
|
