Re: About file systems and formats

On 3/29/07, Ivan Voras <ivoras@xxxxxx> wrote:

Andrew Falanga wrote:
> Yesterday while working on a problem at work, a colleague and I were
> talking
> about the various file systems and something that I have always wondered
on
> is what are the various file systems doing when a format is being done.
> For
> example, at home, my PC has 2 80gb drives. One for Windows and the
other
> for FreeBSD. It took Windows nearly an hour (give or take) to format
the
> 80gb drive. On the other hand, it took FreeBSD little more than 3 - 5
> minutes to format its 80gb drive.

This is too slow for the FreeBSD case. By default, Windows will do a
full format - in effect, will write zeroes all over the drive, with the
intent of checking if the drive is capable of it. Unix format (newfs)
will only initialize file system structures - in effect, will write out
(initially empty) file tables to the drive. This takes about 5-10
seconds on 250 GB drives, so 3-5 minutes you got is way too much.
There's no way of making newfs to the "checking" phase; there are
separate utilities for that.


Wow, I guess so! I did this some time ago and was trying to be conservative
in my time table as I actually couldn't remember the exact time.


my colleague and I because there such a speed difference in formatting
> things (once windows is installed) when choosing between a "Quick
> Format" or
> a "Full Format".

Yes, Quick format will just write the file tables (this is simplified,
but you'll get the picture) on Windows, too.



Sounds like we were on track. The system just creates the appropriate data
structures using newfs and one can use the smartmon Chuck mentioned to keep
track of the surface, i.e. looking for disk defects.

Thanks for the links to the source (Chuck).

Andy
_______________________________________________
freebsd-questions@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@xxxxxxxxxxx"

Relevant Pages

  • Re: Cannot format new 200gb Hard disk
    ... > How to Enable 48-bit Logical Block Addressing Support for ATAPI Disk ... > Drives in Windows XP ... >> to use up all 186.31GB, however if I also choose to format it then at ...
    (microsoft.public.windowsxp.general)
  • Re: Cannot format new 200gb Hard disk
    ... > How to Enable 48-bit Logical Block Addressing Support for ATAPI Disk ... > Drives in Windows XP ... >> to use up all 186.31GB, however if I also choose to format it then at ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Cannot format new 200gb Hard disk
    ... > How to Enable 48-bit Logical Block Addressing Support for ATAPI Disk ... > Drives in Windows XP ... >> to use up all 186.31GB, however if I also choose to format it then at ...
    (microsoft.public.windowsxp.hardware)
  • Re: Cannot format new 200gb Hard disk
    ... >> Drives in Windows XP ... >>> to use up all 186.31GB, however if I also choose to format it then at ... >>> I have also tried using Partition Magic 8.0 but this fails with Error ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Cannot format new 200gb Hard disk
    ... >>> Drives in Windows XP ... however if I also choose to format it then at ... I have also tried using Partition Magic 8.0 but this fails with Error ...
    (microsoft.public.windowsxp.help_and_support)