Marvell 88SE61xx (was: Re: Intel D975XBX2 - BTX halted)
- From: Alexander Anderson <a.anderson@xxxxxxxxxxx>
- Date: Sat, 31 Mar 2007 12:34:28 -0400
Thu, Mar 29, 2007 at 10:43:51 PM, Alexander Anderson wrote:
Hello.
I'm installing FreeBSD 6.2-RELEASE on a brand new system with Intel
D975XBX2 board. It seems that FreeBSD does not support the onboard Marvell
88SE6145 SATA controller. Could someone confirm this?
At first, when I tried to boot the installation CD, the loader hung very
early in the process with the message "BTX halted". But when I went to the
BIOS and disabled "Secondary SATA controller" (in Advanced, Peripheral
Configuration), the CD booted and the install began alright.
[snip]
Now that I figured out what was causing the "BTX halted" error, I'm going
to complete the installation, and then try to enable the Marvell
controller back. Let's see if that works.
No one seems to have replied ...but I'll draw the summary, anyway.
The installation has completed successfully with Marvell 88SE6145 SATA
RAID controller disabled. When I go to BIOS and enable it back, the system
still boots, but dmesg shows no sign of Marvell's presence.
I'm still not sure if the controller is just not configured correctly or
if it is not supported under FreeBSD at all, however, I'm leaning towards
the latter.
Maybe I'll try asking in freebsd-hackers.
Oh well, I guess I'll be looking for the second RAID controller on a PCI-X
card.
_______________________________________________
freebsd-questions@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@xxxxxxxxxxx"
- References:
- Intel D975XBX2 - BTX halted
- From: Alexander Anderson
- Intel D975XBX2 - BTX halted
- Prev by Date: Cannot pkg_add linux-flashplugin7
- Next by Date: Re: dhcpd assigns address, but DNS resolvers and ping fail
- Previous by thread: Intel D975XBX2 - BTX halted
- Next by thread: dhcpd assigns address, but DNS resolvers and ping fail
- Index(es):
Relevant Pages
|
|
