Re: Cloning
On 5/23/07, Grant Peel <gpeel@xxxxxxxxxxxxx> wrote:
Just because it was brought up.....
Can Norton Ghost, run from a floppy be used to clone a FreeBSD disk?
(SCSI -> SCSI)
-Grant
Yup - you'll need the DOS scsi drivers, but it'll work, at the bit level.
Kurt
_______________________________________________
freebsd-questions@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@xxxxxxxxxxx"
Relevant Pages
- Re: Very chatty SCSI bus
... I have heard of SCSI floppy drives but have never seen one. ... out Windows and then remove/insert the floppy and see if it still flashes. ...
(microsoft.public.windowsxp.hardware) - Re: Very chatty SCSI bus
... > We recently purchased a SCSI floppy drive for a special application. ... > I've tested the SCSI floppy under Windows XP and Windows NT. ... > NT the drive and SCSI bus appear fine. ...
(microsoft.public.windowsxp.hardware) - Re: Starmax (Mac clone) resurrection problem
... She has had it 10 years, and never done a backup in its life. ... geoport and and old-style 25 pin SCSI ... I'm OK using the floppy to get all her data and fonts saved. ... How can I get her Quark 3.mumble over to the iMac? ...
(uk.comp.sys.mac) - Re: General problem w/ scuzzy
... > This is my first experience building a SCSI box. ... > bios, which doesn't offer a boot order. ... "Select SCSI peripheral from which to boot" ... the floppy issue aside, ...
(comp.periphs.scsi) - Re: floppy drives was re:netbooting a vax
... :I came across a reference to hooking the 5.25in floppy drive from a pc up ... :cable you hook to the disk looks the same as the connecter on the 5.25in ... There was also a SCSI variant of a floppy around for a while, ... -- the KZQSA Q-bus to SCSI controller. ...
(comp.sys.dec) |
|
