new in the list
- From: electro <electro@xxxxxx>
- Date: Fri, 01 Jun 2007 19:30:01 +0200
Hello everybody
Im new in the list..
Sorry but i will start asking for help
Im new to freebsd and i find a little bit hard to find information about
specific issues
My problem is that i can not get a Conceptronic c54ru version 2 working
in freebsd 6.2... after reading some mailing list it is not clear to me
if this card is supported
dev.ugen.0.%desc: Ralink 802.11 bg WLAN, rev 2.00/0.01, addr 2
dev.ugen.0.%driver: ugen
dev.ugen.0.%location: port=0
dev.ugen.0.%pnpinfo: vendor=0x14b2 product=0x3c22 devclass=0x00
devsubclass=0x00 release=0x0001 sernum=""
dev.ugen.0.%parent: uhub0
The other problem is with a Conceptronic c54c and wpa_supplicant
ath0@pci4:0:0: class=0x020000 card=0x3a941186 chip=0x0013168c rev=0x01
hdr=0x00
vendor = 'Atheros Communications Inc.'
device = 'AR5212, AR5213 802.11a/b/g Wireless Adapter'
class = network
subclass = ethernet
it associates with the ap but then fails with
WPA: drop TX EAPOL in non-IEEE 802.11x mode type=1 len=0
wpa_driver_bsd_set_drop_unencrypted: enabled=0
and in the logs
ath0: link state changed to UP
ath0: link state changed to DOWN
ath0: link state changed to UP
ath0: link state changed to DOWN
.....
wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
network={
ssid="missid"
psk="mipsk"
scan_ssid=1
proto=WPA
key_mgmt=WPA-PSK
pairwise=TKIP
}
i've tried with other options but this should work as it does with the
same machine, same card, same ap, but other OS.
Thanks for your help
_______________________________________________
freebsd-questions@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@xxxxxxxxxxx"
- Follow-Ups:
- Re: new in the list
- From: Jim Capozzoli
- Re: new in the list
- Prev by Date: Re: Download speed and TCPIP window sizing
- Next by Date: Re: Switching between half-duplex and full duplex
- Previous by thread: New (blade) server - stick with FreeBSD 6.x or wait for FreeBSD 7?
- Next by thread: Re: new in the list
- Index(es):
Relevant Pages
|
