Re: freebsd / gateway / parental control



On Fri, 29 Jun 2007 08:42:58 +0200 (CEST)
"zigniew szalbot" <zbigniew@xxxxxxxxxxxxxxxxxxxx> wrote:

Great! OK I am encouraged to give it a try. But hardware-wise I will need
to NICs and plug my modem line into one NIC and then the other NIC will be
used to connect the Dlink router. I figure the Dlink router essentially
becomes redundant but it is a wireless machine so I would like to use it
anyway.

you'll need 2 nics, right.

If you use the wireless in the DSL modem, you'll be bypassing the BSD server.
Which may be fine if the kids' computer(s) cant do wireless. (beware of USB
wireless dongles ;) )


Is my thinking correct here?

what I have planned to do is use a non-wireless DSL modem in bridged mode
(DLINK 504T), connect to the BSD box.

BSD box with 2 NICs ('wan' and 'lan') as well as a DLINK G520 PCI Wireless
card (Atheros chipset) and make the BSD box the wireless AP.

And throwing in a small flash IDE drive for faster bootups.

_________________________
{Beto|Norberto|Numard} Meijome

Commitment is active, not passive. Commitment is doing whatever you can to
bring about the desired result. Anything less is half-hearted.

I speak for myself, not my employer. Contents may be hot. Slippery when wet.
Reading disclaimers makes you go blind. Writing them is worse. You have been
Warned.
_______________________________________________
freebsd-questions@xxxxxxxxxxx mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscribe@xxxxxxxxxxx"



Relevant Pages

  • Re: freebsd / gateway / parental control
    ... I figure the Dlink router essentially ... you'll need 2 nics, right. ... If you use the wireless in the DSL modem, you'll be bypassing the BSD ...
    (freebsd-questions)
  • Re: SBS2003 w/Router or wo/Router
    ... connect a different Router or NIC to the modem. ... If I want to use the domain resources with wireless clients we can ... >> two NICs installed. ...
    (microsoft.public.windows.server.sbs)
  • SBS, 2 Nics, Router, Modem - No Internet
    ... New Installation of SBS from the scratch. ... Standard DNS is OK again. ... Installed a Belkin router and an D-Link ADSL Modem. ... I know, not more than two Nics are allowed, but can I keep the ISDN ...
    (microsoft.public.windows.server.sbs)
  • Re: Internet Connection Sharing Problem
    ... Modem solved the problem. ... > other PCs show activity on their NICs with the same amount of data ... I can ping 192.168.0.1 but not google. ... >> to the LAN connection is fine, but it has to be in a different subnet ...
    (microsoft.public.windowsxp.network_web)
  • Re: Best Config for LAN
    ... With the router at .0.1, ... XP wireless NIC at .0.2, ... This gave me connectivity from the server to the bridge. ... The two NICs of an ICS machine must be in different IP subnets, ...
    (microsoft.public.windows.server.networking)